Edelbrock 2810 Bedienungsanleitung

Rev. 2/04 - RS/mc

Catalog #2810/#2811

Brochure # 63-0257

Victor Intake Manifold for 400-455 c.i.d. Olds V8

Operating Range: 4000-7500 RPM

Catalog #2810 & #2811

INSTALLATION INSTRUCTIONS

Please study these instructions carefully before installing your new Edelbrock Victor Intake Manifold for 400-455 c.i.d.

Oldsmobile V8. If you have any questions or problems, do not hesitate to contact our Technical Hotline

at:

1-800-416-8628, from 7 am - 5 pm Pacific Standard Time, Monday-Friday, or via e-mail at: [email protected].

•Description: This manifold is designed for competition vehicles ONLY, and is not intended to be used on the street, as it

does not have provisions for chokes, emissions pieces, etc. It is designed for Olds 400-455 c.i.d. competition engines,

using stock cast iron, or Edelbrock Performer RPM aluminum cylinder heads. Port exit size is 2.22” x 1.28”, with enough

material to allow porting to match larger port openings, if desired. Two versions are available; Part #2810 uses standard

flange, 850 cfm carburetors, and Part #2811 is for 4500 series carburetors. Both models are suitable for drag racing

(Super Stock, Super Gas, Super Comp, Brackets, etc.), marine or any application requiring maximum power up to 7500

rpm. The manifold carburetor pad height (A/B height) is 8.2”, and will not fit under most stock hoods.

•Port Matching: For maximum performance, we recommend port/gasket matching the port exits to the cylinder head.

The manifold is tapered in the last 1.5” of the runners to stock as-cast port exit size.

•Carburetor Recommendations: Use an appropriate racing carburetor or the accepted carburetor for your racing class.

•Intake Gasket: Use Mr. Gasket Part #404, or contact Mondello Performance at (805) 237-8808 for correct gasket kit.

•Carburetor Spacers: Some applications may benefit from the use of a one-inch open carburetor spacer, such as

Edelbrock Part #8710 (standard flange carburetors with Part #2810), or Part #8718 (cloverleaf spacer for 4500 series

carburetors with Part #2811). This normally requires slight recalibration of the carburetor since small losses of fuel signal

cause the engine to run somewhat leaner than without the spacer. A simple jet change is typically all that needs to be

done.

PLEASE complete and mail your warranty card. Be sure to write the model number in the “Part #____” space. THANK YOU.

Edelbrock Corporation • 2700 California St.

Torrance, CA 90503 • Tech Line: 1-800-416-8628

Office: (310) 781-2222 • E-Mail: [email protected]

Intake Manifold Tightening Sequence

Tighten All Manifold Bolts to 25 ft./lbs.

1 368

4572

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Edelbrock Automobilteil Handbücher

Edelbrock

Edelbrock 3722 Bedienungsanleitung

Edelbrock

Edelbrock 6502 Bedienungsanleitung

Edelbrock

Edelbrock 1483 Bedienungsanleitung

Edelbrock

Edelbrock 6661 Bedienungsanleitung

Edelbrock

Edelbrock 3562 Bedienungsanleitung

Edelbrock

Edelbrock 70080 Bedienungsanleitung

Edelbrock

Edelbrock Performer 1403 Bedienungsanleitung

Edelbrock

Edelbrock 3862 Bedienungsanleitung

Edelbrock

Edelbrock 1799 Bedienungsanleitung

Edelbrock

Edelbrock 5684 Bedienungsanleitung

Edelbrock

Edelbrock Russell 207-2 Handbuch

Edelbrock

Edelbrock E-TEC 170 Bedienungsanleitung

Edelbrock

Edelbrock 65012 Bedienungsanleitung

Edelbrock

Edelbrock 770769 Bedienungsanleitung

Edelbrock

Edelbrock 2929 Bedienungsanleitung

Edelbrock

Edelbrock 2980 Bedienungsanleitung

Edelbrock

Edelbrock 5282 Bedienungsanleitung

Edelbrock

Edelbrock 66112 Bedienungsanleitung

Edelbrock

Edelbrock 68952 Bedienungsanleitung

Edelbrock

Edelbrock ENDURASHINE 63-0299 Bedienungsanleitung

Edelbrock

Edelbrock Performer 7162 Bedienungsanleitung

Edelbrock

Edelbrock 6652 Bedienungsanleitung

Edelbrock

Edelbrock 1931 Bedienungsanleitung

Edelbrock

Edelbrock 1905 Bedienungsanleitung

Beliebte Automobilteil Handbücher anderer Marken

Dakota Digital

Dakota Digital 650277 Bedienungsanleitung

bosal

bosal 037031 Bedienungsanleitung

Vintage Air

Vintage Air 571063 Bedienungsanleitung

GFB

GFB EX38 Bedienungsanleitung

bosal

bosal 028091 Bedienungsanleitung

Dodge

Dodge 8W-43 Kurzanleitung

ICI

ICI Magnum FBM10DGN Bedienungsanleitung

Volant Perfomance

Volant Perfomance 19435 Bedienungsanleitung

BENDIX

BENDIX GEN 4 GEN 5 ABS Bedienungsanleitung

Vintage Air

Vintage Air 571065 Bedienungsanleitung

Rugged Ridge

Rugged Ridge 11503.13 Bedienungsanleitung

BENDIX

BENDIX CYCLONE DURADRAIN TRAILER WATER Bedienungsanleitung

Porsche

Porsche 968 - ASSEMBLY INSPECTION PROCEDURE AND MAINTENANCE... Leitfaden

Sumitomo

Sumitomo FINE CYCLO FC-A 15 G Bedienungsanleitung

Toshiba

Toshiba 48-1250 A Bedienungsanleitung

aldes

aldes EHT2 Bedienungsanleitung

Go Rhino

Go Rhino 24371T Bedienungsanleitung

BBK

BBK 18950 Bedienungsanleitung