Edelbrock 65912 (Ceramic-Coated) Bedienungsanleitung

Rev. 1/05 Catalog #65912 &65913

DA/mc

Page 1of 3

EDELBROCK HEADERS

CATALOG #65912 (Ceramic-Coated) & 65913 (Ti-Tech Coated)

for 1972-1991 Jeep, Full Size Cherokee, Wagoneer & J-Series Pick-Up,

1972-1981 Jeep CJ5, CJ7, &CJ8

1970-1979 AMC, AMX, Javelin, Rebel, Matador

with 304, 360, 390, or 401 without A.I.R.

INSTALLATION INSTRUCTIONS

PLEASE study these instructions carefully before installing your Headers. If you have any questions or problems, please

call our Technical Hotline at: 1-800-416-8628 from 7:00 am - 5:00 pm, Monday-Friday, Pacific Standard Time or

e-mail us at [email protected]. Please fill out and mail your warranty card.

HEADERS: These components are designed to improve the exhaust efficiency of the AMC/Jeep 304, 360, 390, &401 cu.

in. V8. Most applications do not require welding for installation and retains all O.E.M. emissions equipment.

NOTE: These headers will not work on early rectangular port heads.

SUGGESTED TOOLS FOR INSTALLATION:

❑3/8" ratchet socket set with extensions and universal

❑Combination set of open-end wrenches

❑Jackstands, screwdrivers, pliers, crescent wrench, etc.

❑Liquid penetrant, (GM #1052627) anti-seize compound (GM #5613695)

SPECIAL NOTICE: This Edelbrock part has received an Executive Order (E.O. #) from the California Air Resources Board

(C.A.R.B.)making it legalfor streetuse on pollution-controlledmotor vehiclesin all 50states. To assistyou with emissions

equipment certification, we have included a silver fan shroud decal to help testing personnel verify that this part is a legal

replacement part on the vehicle for which it is cataloged. The adhesive-backed decal should be affixed to your fan shroud

next to the existing emission and engine specification decal. Do not cover your original equipment specification decal with

the Edelbrock fan shroud decal.

Notes on Specific Applications: These shorty headers are designed to be a direct replacement for OEM cast iron

manifolds, known as high flow manifolds used on many AMC cars and Jeep vehicles. Some of the vehicles listed above

came with different exhaust manifolds on one side and will require modification to exhaust down pipe on one side (see

below).

Jeep Application Note: When installing this system on some 1981-1991 Jeep Grand Wagoneer, 1981-1983

Cherokee,or 1981-1988Jseries pick-up,check thelocation oftheoutlet ofthe leftside exhaustmanifold. Ifthe outlet

is located under the 3rd spark plug, no modification will be needed. If the outlet is directly under the 4th spark plug,

the stock down pipe will require modification.

AMC Car Application Note: When installing this system on 1970-1979 AMC cars with (Type 1) right side manifold,

no modification is needed. If your car has (Type 2) right side manifold, modification to stock down pipe is required.

TYPE 1 TYPE 2

Rev. 1/05 Catalog #65912 &65913

DA/mc

Page 2of 3

4. With wire ties, route any hoses, wires or lines

away from headers as necessary.

5. Re-install your factory heat riser valve using the

supplied flat gasket along with the factory

exhaust pipe and supplied 3/8 x 3 Hex bolts,

lockwashers and flatwashers. Do not

overtighten!

NOTE: If your vehicle has an early style heat

riser valve, without the tapered flange to seal

against the flare of the exhaust pipe, use the

donut gasket with the smallest I.D. steel ring on

the outlet of the heat riser, or you can purchase

the updated later model heat riser valve

#J3238998 from a Jeep dealer or Napa #600-

1828.

6. Install factory exhaust pipe onto left header

using supplied graphite donut gasket, 3/8 x 2

hex bolts, lockwashers, and flatwashers. Do

not overtighten!

FINAL INSPECTION

1. Check all lines (hydraulic, vacuum, air

conditioning and fuel) to ensure there is

adequate clearance to headers. Use wire ties as

needed.

2. Re-connect battery.

3. At this point, it is a good idea to look everything

over and make sure that nothing was missed in

assembly.

4. Start vehicle and bring up to normal operating

temperature. Check for possible leaks.

5. Turn engine off and let cool. Tighten all bolts

again. Flange bolts should be tightened starting

with the center bolts working out.

ASSEMBLY

1. Install flange gaskets and headers from top.

Install header bolts, lock washers, and thick flat

washers supplied (NOTE: Thick washers are to

be used on slotted holes of port flange.), ensure

proper alignment and tighten bolts starting with

the center working out towards ends of flange.

2. Re-install spark plug wires and dipstick tube

retainer bracket.

NOTE: The installation kit includes a 2-piece

clamp on heat stove assembly. Using the two

supplied hose clamps, it can be clamped to the

first primary tube on the passengerside header,

if needed.

3. Re-installair cleanerand coldair tubeand install

supplied heat stove flex tube. Use supplied

adapter with clamp on air cleaner housing, if

needed.

DISASSEMBLY

1. Disconnect negative battery cable.

2. Raise vehicle and disconnect 02 sensor, if

equipped.

3. Unbolt stock exhaust pipes from manifolds.

4. Remove heat riser valve, clean and check for

proper operation. Replace, if necessary.

5. Remove cold air tube and heat stove hot air

tube, if equipped and remove air cleaner

assembly.

6. Disconnect and move spark plug wires out of

the way.

7. Remove dipstick tube retainer bracket attached

to valve cover bolt.

8. Unbolt and remove manifolds.

9. Cleanexhaustflangegasketsurfacesofcylinder

head thoroughly.

WARNING: The use of "Thermal Wrap" or any aftermarket coating process will void the warranty on your

headers. Those products can cause excessive heat and moisture buildup resulting in corrosion and early

failure of the system.

NOTE: High temperature spark plug wires and boots are recommended to withstand heat from Headers.

Rev. 1/05 Catalog #65912 &65913

DA/mc

Page 3of 3

Edelbrock Corporation

2700 California St.

Torrance, CA 90503

Tech Line: (800) 416-8628

Office: (310) 781-2222

E-Mail: [email protected]

HARDWARE SUPPLIED

Qty. Description Qty. Description

❑1#25-9367 Header left side (Painted) ❑43/8” Flat washers (Standard)

❑1#25-9368 Header right side (Painted) ❑85/16” Lockwashers

❑1#25-9369 Header left side (Ceramic-Coated) ❑1Heat riser gasket

❑1#25-9370 Header right side (Ceramic-Coated) ❑4Hardened washers (for header flange slotted holes)

❑12 Hex header bolts 3/8” ❑1Heat stove flex tube 2”

❑2Port gaskets ❑ 8Hex header bolts 5/16” (late model)

❑23/8” x 2” Hex bolts ❑1Donut gasket (left)

❑23/8” x 3” Hex bolts ❑1Donut gasket (right) (early AMC)

❑16 3/8” Lock washers ❑4Wire tires 11”

❑22” dia. Hose clamps (heat stove) ❑1Heat stove stack assembly

❑1Heat stove adapter clamp ❑1Heat stove (lower half)

❑1Heat stove adapter

Dieses Handbuch passt für folgende Modelle

Andere Edelbrock Automobilteil Handbücher

Edelbrock

Edelbrock 68512 Bedienungsanleitung

Edelbrock

Edelbrock 6661 Bedienungsanleitung

Edelbrock

Edelbrock 68712 Bedienungsanleitung

Edelbrock

Edelbrock 6606 Bedienungsanleitung

Edelbrock

Edelbrock 770769 Bedienungsanleitung

Edelbrock

Edelbrock 33503 Bedienungsanleitung

Edelbrock

Edelbrock VICTOR 8841 Gebrauchsanweisung

Edelbrock

Edelbrock 72176 Bedienungsanleitung

Edelbrock

Edelbrock 3862 Bedienungsanleitung

Edelbrock

Edelbrock Russell R08367 Bedienungsanleitung

Edelbrock

Edelbrock Russell 672500 Bedienungsanleitung

Edelbrock

Edelbrock 70027 Bedienungsanleitung

Edelbrock

Edelbrock 3562 Bedienungsanleitung

Edelbrock

Edelbrock 1472 Bedienungsanleitung

Edelbrock

Edelbrock Chevrolet 1500-6500 Bedienungsanleitung

Edelbrock

Edelbrock 65003 Bedienungsanleitung

Edelbrock

Edelbrock 68752 Bedienungsanleitung

Edelbrock

Edelbrock Predator Carburetor Betriebsanleitung

Edelbrock

Edelbrock 5426 Bedienungsanleitung

Edelbrock

Edelbrock 24502574 LT4 Bedienungsanleitung

Edelbrock

Edelbrock 66062 Bedienungsanleitung

Edelbrock

Edelbrock 6692 Bedienungsanleitung

Edelbrock

Edelbrock 5226 Bedienungsanleitung

Edelbrock

Edelbrock Performer-Plus 2172 Bedienungsanleitung

Beliebte Automobilteil Handbücher anderer Marken

Dakota Digital

Dakota Digital 650277 Bedienungsanleitung

bosal

bosal 037031 Bedienungsanleitung

Vintage Air

Vintage Air 571063 Bedienungsanleitung

GFB

GFB EX38 Bedienungsanleitung

bosal

bosal 028091 Bedienungsanleitung

Dodge

Dodge 8W-43 Kurzanleitung

ICI

ICI Magnum FBM10DGN Bedienungsanleitung

Volant Perfomance

Volant Perfomance 19435 Bedienungsanleitung

BENDIX

BENDIX GEN 4 GEN 5 ABS Bedienungsanleitung

Vintage Air

Vintage Air 571065 Bedienungsanleitung

Rugged Ridge

Rugged Ridge 11503.13 Bedienungsanleitung

BENDIX

BENDIX CYCLONE DURADRAIN TRAILER WATER Bedienungsanleitung

Porsche

Porsche 968 - ASSEMBLY INSPECTION PROCEDURE AND MAINTENANCE... Leitfaden

Sumitomo

Sumitomo FINE CYCLO FC-A 15 G Bedienungsanleitung

Toshiba

Toshiba 48-1250 A Bedienungsanleitung

aldes

aldes EHT2 Bedienungsanleitung

Go Rhino

Go Rhino 24371T Bedienungsanleitung

BBK

BBK 18950 Bedienungsanleitung