Edelbrock Acura Integra 6737 Bedienungsanleitung

Pro-Flo Header

1994-2001 Acura Integra GS, RS, LS (Non-

Catalog PNs 6637, 6737, 6837

Please study these instructions carefully before installing your new Pro-

died and understood before you remove your stock

system. Failure to follow these instructions may void your warranty. If you h

-800-416-–

Monday through Friday, Pacific Standard Time.

-Flo header components are designed to improve the exhaust

e Acura 1.8L (Non-VTec) engine. A performance gain can be expected with the

installation of the system. This system requires no welding for installation and retains all stock

emissions equipment.

Suggested tools needed for installation: has some metric fasteners.

•3/8” ratchet socket set with extensions and a good assortment of metric sockets

•Combination wrenches (metric)

•Universal 12mm and 14mm swivel sockets

•Jackstands, screwdrivers, pliers, crescent wrench, etc.

•Liquid penetrant (GM #1052627 or equivalent); anti-seize compound (GM #5613695 or

equivalent)

SPECIAL NOTICE: This Edelbrock part has received an Executive Order number (E.O. #) from

the California Air Resources Board (C.A.R.B.) making it legal for street use on pollution-con

motor vehicles in all 50 states. To assist you with emissions equipment certification, we have

roud decal to help testing personnel verify that this part is a legal

replacement part on the vehicle for which it is cataloged. -backed decal should be

affixed to your fan shroud next to the existing emission and engine specification decal.

cover your original equipment specification decal with the Edelbrock fan shroud decal.

The use of “Thermal Wrap” or any aftermarket coating process will void the

warranty on your Pro-Flo header. Those products can cause excessive heat and moisture build up

resulting in corrosion and early failure of the system.

1. Disconnect battery negative cable from battery.

2. Raise vehicle and support with jackstand.

3. The use of penetrating oil when removing and the use of anti-seize compound when

installing nuts and bolts will prevent the possibility of broken or stri

4. Make sure converter is cool.

PARTS LIST

DISASSEMBLY (Continued)

5. Remove O2 sensor (if applicable) being careful not to destroy or rupture the unit.

clean this unit in any cleaning solvents and do not rupture

6. Remove the two nuts from hanger bracket. Remove the two bolts and springs at the

catalytic converter. Then unbolt the three bolts at the mid-section of manifold and

remove lower portion o -

7. Remove the bolt that is attached to the engine block in the lower section of manifold.

Remove bolts from manifold at cylinder head and pull manifold out from top side.

Note: Save all factory nuts, bolts and springs to be used during re-

1. Install (a section) of header assembly from top side with gasket and 9 hardened

washers (supplied in kit), using factory bolts/nuts as applicable.

2. Install secondary section (B section) to (A section) top half using the three 10mm. Bolts

and lock washers with the two crush ring gaskets (all supplied in kit). Use anti-

. (The two crush rings should be installed with the seam or split down towards

B-

3. With donut in place, connect header to catalytic converter using stock hardware as

4. Install O2 sensor “if equipped”. Use anti-seize on threads of sensor and torque to 30 ft.

Part Numbers Qty. PN Description

125-9180 Pro-Flo Header (A Section)

6637 125-9201 Pro-Flo Header (B Section)

122-6852 Installation Kit

125-9182 Pro-Flo Header (A Section)

6737 125-9200 Pro-Flo Header (B Section)

122-6852 Installation Kit

125-9178 Pro-Flo Header (A Section)

6837 125-9199 Pro-Flo Header (B Section)

122-6852 Installation Kit

Edelbrock Corporation

2700 California Street

Torrance, CA 90503

Tech Line: (800) 416-8628

E-Mail: [email protected]

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Edelbrock Automobilteil Handbücher

Edelbrock

Edelbrock 70405 Bedienungsanleitung

Edelbrock

Edelbrock 66082 Bedienungsanleitung

Edelbrock

Edelbrock Honda 4743 Bedienungsanleitung

Edelbrock

Edelbrock Performer 4754 Bedienungsanleitung

Edelbrock

Edelbrock 6692 Bedienungsanleitung

Edelbrock

Edelbrock 71852 Bedienungsanleitung

Edelbrock

Edelbrock 6606 Bedienungsanleitung

Edelbrock

Edelbrock EFI Fuel Pressure Regulators 1728 Bedienungsanleitung

Edelbrock

Edelbrock 6607 Bedienungsanleitung

Edelbrock

Edelbrock Pro-Tuner Bedienungsanleitung

Edelbrock

Edelbrock CHEVROLET V8 302-400 C.I.D. Bedienungsanleitung

Edelbrock

Edelbrock Russell R09201 Bedienungsanleitung

Edelbrock

Edelbrock 5694 (Stainless Steel) Bedienungsanleitung

Edelbrock

Edelbrock Performer 1670 Bedienungsanleitung

Edelbrock

Edelbrock 3821 Bedienungsanleitung

Edelbrock

Edelbrock 33503 Bedienungsanleitung

Edelbrock

Edelbrock ENDURASHINE 63-0299 Bedienungsanleitung

Edelbrock

Edelbrock Edelbrock Header 6525 Bedienungsanleitung

Edelbrock

Edelbrock 7122 Bedienungsanleitung

Edelbrock

Edelbrock 67312 Bedienungsanleitung

Edelbrock

Edelbrock 641563 Bedienungsanleitung

Edelbrock

Edelbrock 5272 Bedienungsanleitung

Edelbrock

Edelbrock 3865 Bedienungsanleitung

Edelbrock

Edelbrock 68832 (Ceramic-Coated) Bedienungsanleitung

Beliebte Automobilteil Handbücher anderer Marken

Dakota Digital

Dakota Digital 650277 Bedienungsanleitung

bosal

bosal 037031 Bedienungsanleitung

Vintage Air

Vintage Air 571063 Bedienungsanleitung

GFB

GFB EX38 Bedienungsanleitung

bosal

bosal 028091 Bedienungsanleitung

Dodge

Dodge 8W-43 Kurzanleitung

ICI

ICI Magnum FBM10DGN Bedienungsanleitung

Volant Perfomance

Volant Perfomance 19435 Bedienungsanleitung

BENDIX

BENDIX GEN 4 GEN 5 ABS Bedienungsanleitung

Vintage Air

Vintage Air 571065 Bedienungsanleitung

Rugged Ridge

Rugged Ridge 11503.13 Bedienungsanleitung

BENDIX

BENDIX CYCLONE DURADRAIN TRAILER WATER Bedienungsanleitung

Porsche

Porsche 968 - ASSEMBLY INSPECTION PROCEDURE AND MAINTENANCE... Leitfaden

Sumitomo

Sumitomo FINE CYCLO FC-A 15 G Bedienungsanleitung

Toshiba

Toshiba 48-1250 A Bedienungsanleitung

aldes

aldes EHT2 Bedienungsanleitung

Go Rhino

Go Rhino 24371T Bedienungsanleitung

BBK

BBK 18950 Bedienungsanleitung