EdgeStar RP401MED Bedienungsanleitung

V1.1 04092020

Precision Cooled Refrigerator

Owner’s Manual

For more information on other great EdgeStar products on the web, go to http://www.edgestar.com

RP401MED

Important Safety Information

Improper handling can cause serious damage to the EdgeStar medical refrigerator and / or

injury to the user.

Please review the ratings label located on the rear panel of the unit for electrical and other

technical data related to this unit. The unit must be used in a properly grounded wall outlet.

Please read and follow the safety information listed below to reduce the risk of fire,

electric shock, or injury.

Electrical Safety

•Do not exceed the power outlet ratings.

•It is recommended the beverage refrigerator be connected on its own circuit.

•The unit must be installed in accordance with state and local electrical codes.

•A standard electrical supply (115 V, 60Hz), that is properly grounded in accordance with the National

Electrical Code and local codes and ordinances is required.

•Use outlets that cannot be turned off by a switch or pull chain.

•Always turn the unit off and unplug it from the outlet when cleaning.

•Unplug the unit if it is not going to be used for an extended period of time.

•Do not operate the unit with a power plug missing the ground plug, a damaged cord, or a loose socket.

•Be sure the beverage refrigerator is properly grounded.

•Avoid installation in high humidity environments such as bathrooms and non-acclimatized basements.

Excess moisture may create condensation on the door and impact the performance of the refrigerator.

•Never plug or unplug the unit with wet hands.

•Do not bypass, cut, or remove the grounding plug.

•Do not use extension cords or power strips with this unit. You may need to contact your electrician if it is

necessary to use a longer cord or if you do not have a grounded outlet. Do not modify the power cord’s

length or share the outlet with other appliances.

•Do not start or stop the unit by switching the circuit’s power on and off.

•If the power cord is damaged, it must be replaced by the manufacturer or a qualified technician.

•Never repair the unit while it is plugged in.

•Immediately unplug the unit if it makes strange sounds, emits smells, or smoke comes out of it, and contact

customer service.

•Do not remove any part of the casing unless instructed to do so by an authorized technician.

•You should never attempt to repair the unit yourself. Contact customer service for service options if the unit

needs service.

Note: This owner’s manual is provided for reference use only. Specifications may change

without prior notice. Refer to the product label on the back of your precision refrigerator for the

latest technical information.

Disposal: This appliance may not be treated as regular household waste, it should be taken to the

appropriate waste collection.

General Safety

•To prevent injuries, use at least two people to move and install the beverage refrigerator.

•Install the beverage refrigerator in a well-ventilated area where the ambient temperature is above 50°

F and below 90° F.

•The temperature range for this refrigerator is optimized for beverage storage. Perishable food items

may require a different storage environment.

•Do not place hot or warm items into the refrigerator before they cool down to room temperature.

•This unit is designed to be installed indoors, and protected from rain, sleet, snow, and / or moisture.

•This unit is not intended to be used by children.

•Children should be supervised to ensure that they do not play with this product.

•Never allow children to crawl inside the refrigerator. If you are disposing of the unit, remove the door.

•Do not use this appliance near flammable gas or combustibles such as gasoline, benzene, or thinner.

•Do not store explosive substances such as aerosol cans with flammable propellant in this appliance.

•Do not place the unit near heat sources such as ovens, grills, or direct sunlight.

•Only use in an upright position on a flat, level surface and provide proper ventilation.

•Do not pinch or kink the power supply line between the unit and cabinet.

•Do not leave any cleaning solutions in the unit.

•Do not use solvent-based cleaning agents or abrasive solutions to clean the unit as they may damage

the interior and exterior.

•Do not place any other appliances on top of the unit.

•Do not turn the unit upside down, on its side, or at an angle off level.

•If your model of beverage refrigerator is equipped with a lock, keep the keys away from children.

•Do not move the unit without emptying the contents and securing the door in a closed position.

•This appliance is not intended for use by persons (including children) with reduced physical, sensory,

or mental capabilities unless theyare given supervision or instructionby a person responsible for their

safety.

•This appliance is meant for use in the household or similar settings.

•Keep all ventilation openings clear of obstruction.

•Do not use mechanical devices or other means to accelerate the defrosting process.

•Do not damage the refrigerant circuit.

•Do not use other appliances inside the refrigerator unless recommended by the manufacturer.

•If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or a

similarly qualified individual.

iii 
 
 
Table of Contents 
IMPORTANT SAFETY INFORMATION……………………………………………………………………………………...I 
TABLE OF CONTENTS………………………………………………………………………………………………………..III 
FIRST TIME OPERATING INSTRUCTIONS………………………………………………………………………………………….1 
INTRODUCTION……………………………………………………………………………………………………………….. 1 
PARTS IDENTIFICATION…………………………………………………………………………………………………….. 2 
FRONT VIEW……………………………………………………………………………………………………………………… 2 
BACK VIEW……………………………………………………………………………………………………………………….. 2 
INSTALLING THE REFRIGERATOR………………………………………………………………………………………...3 
UNPACKING THE MEDICAL REFRIGERATOR…………………………………………………………………………………… 3 
FREE-STANDING INSTALLATION………………………………………………………………………………………………….. 3 
INSTALLATION CLEARANCE REQUIREMENTS……………………………………………………………………………………..4 
ELECTRICAL REQUIREMENTS……………………………………………………………………………………………………. 4 
Recommended Grounding Method……………………………………………………………………………………………4 
LEVELING THE MEDICAL REFRIGERATOR……………………………………………………………………………………… 5 
INSTALLING THE DOOR HANDLE…………………………………………………………………………………………………. 5 
INSTALLING AND REMOVING THE SHELVES……………………………………………………………………………………… 6 
Installing the Shelves…………………………………………………………………………………………………………... 6 
Removing the Shelves…………………………………………………………………………………………………………. 6 
OPERATION……………………………………………………………………………………………………………………. 6 
INSTALLATION CHECK LIST BEFORE OPERATION……………………………………………………………………………….. 6 
USING THE TEMPERATURE CONTROL PANEL…………………………………………………………………………………… 7 
USING THE REFRIGERATOR THERMOMETER AND ALARM……………………………………………………………………….8 
Operation Modes……………………………………………………………………………………………………………….. 8 
Setting the High / Low Alarm………………………………………………………………………………………………….. 8 
Alarm…………………………………………………………………………………………………………………………….. 8 
Resetting Min / Max Memories………………………………………………………………………………………………...9 
Other……………………………………………………………………………………………………………………………...9 
NORMAL SOUNDS…………………………………………………………………………………………………………………9 
DEFROSTING………………………………………………………………………………………………………………………10 
PREPARING THE MEDICAL REFRIGERATOR FOR STORAGE…………………………………………………………………… 10 
CLEANING AND MAINTENANCE……………………………………………………………………………………………10 
EXTERIOR CLEANING…………………………………………………………………………………………………………….. 10 
INTERIOR CLEANING………………………………………………………………………………………………………………10 
TROUBLESHOOTING………………………………………………………………………………………………………… 11 
SPECIFICATIONS………………………………………………………………………………………………………………13 
EDGESTAR LIMITED WARRANTY…………………………………………………………………………………………. 14 
 

First Time Operating Instructions

Before use, make sure all packaging labels and materials are removed from the unit. Be sure

to keep track of all included parts and pieces before discarding the packaging materials. It is

advised that you keep the original box and packaging materials in case you ever need to move

or ship the appliance in the future.

Let the unit stand for at least 24 hours before you use it; this allows the cooling components

time to settle from transit. The instruction manual should be read before use.

Introduction

Thank you for purchasing this EdgeStar medical refrigerator. We hope that this purchase will

be the beginning of a lasting and rewarding relationship between you and EdgeStar. We will

provide the customer support and exemplary products necessary to nurture that relationship.

This manual contains important information regarding the proper installation, use, and

maintenance of your medical refrigerator. Following this manual will ensure that your product will

work at its peak performance and efficiency.

Please save the original product packaging in case you need to safely transport your medical

refrigerator.

For Your Records:

Please write down the model number and serial number below for future reference.

Both numbers are located on the ratings label on the back of your unit and are needed

to obtain warranty service. You may also want to staple your receipt to this manual as it

is the proof of your purchase, and is also needed for service under your warranty.

Model Number:

Serial Number:

Date of Purchase:

For a more efficient experience, please do the following before contacting customer service:

•If you received a damaged product, immediately contact the retailer or dealer that sold you

the product.

•Read and follow this instruction manual carefully to help you install, use, and maintain your

medical refrigerator.

•Read the troubleshooting section of this manual as it will help you diagnose and solve

common issues.

•Visit us on the web at http:/www.edgestar.com to register your product, download product

guides, and access additional troubleshooting resources and up-to-date information.

•If you need warranty service, our friendly customer service representatives are available

via email at se[email protected].

Parts Identification

Front View

Back View

Warning: Use two or more people to move and install the precision refrigerator. Failure to do

so can result in back or other injury. Carefully remove the packaging materials. Remove any

shipping tape and glue from your precision refrigerator before use. Do not use sharp

instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue.

These products can damage the surface of your precision refrigerator.

Important: Do not remove any safety, warning, or product information labels from your

precision refrigerator.

Installing the Refrigerator

The refrigerator should be installed in accordance with local electrical code requirements. The

unit should also be placed in a location that is strong enough to support its total weight,

keeping in mind that it will weigh substantially more when fully loaded than when empty.

Before you plug the medical refrigerator into a power supply, be sure to let it stand

upright for at least 24 hours to allow the compressor’s oils to settle.

Unpacking the Medical Refrigerator

Free-standing Installation:

A free-standing installation will allow you to install the medical refrigerator in almost any place

you desire as long as there is ample clearance for proper heat ventilation. You must follow the

stated instructions for electrical requirements and leveling the medical refrigerator.

•The medical refrigerator should be installed on a firm and level surface that will be able to

support the entire weight of a fully loaded unit. It is important for the medical refrigerator to

be level in order to work properly. If needed, you can adjust the height of the medical

refrigerator by rotating the feet.

•Choose a location that has ambient temperatures above 50° F and below 95° F. Operation

outside these temperatures may result in lowered efficiency or cause other adverse

effects.

•This unit MUST be installed in an area protected from the elements, e.g., wind, rain, water

spray or drips.

•The medical refrigerator should not be located next to ovens, grills, or other high heat

sources.

•Do not kink or pinch the power supply cord between the medical refrigerator and wall or

cabinet.

ELECTRIC SHOCK HAZARD!

•Plug into a grounded 3-prong outlet.

•Never remove the grounding prong from the plug.

•Never use an adapter to bypass the grounding prong.

•DO NOT use an extension cord.

•Failure to follow these instructions can result in fire, electrical shock, or death.

Installation Clearance Requirements

To ensure proper ventilation and service access, allow at least 3” of clearance at the sides

and top of the medical refrigerator, and at least 5” of clearance at the back. Do not install

this unit in a built in undercounter setting.

Electrical Requirements

Before you move your medical refrigerator into its final location, it is important to make sure

you have the proper electrical connection:

A standard electrical supply (115 V, 60Hz), properly grounded in accordance with the National

Electrical Code and local codes and ordinances, is required.

It is recommended that a separate circuit, serving only your medical refrigerator, be provided.

Use receptacles that cannot be turned off by a switch or pull chain.

The fuse (or circuit breaker) size should be 15 Amps.

Recommended Grounding Method

For your personal safety, this appliance must be grounded. It is equipped with a power

supply cord that has a 3-pronged grounding plug. To minimize possible shock hazard, the

cord must be plugged into a mating 3-pronged wall socket, and grounded in accordance

with the National Electrical Code and local codes and ordinances. If a mating wall socket

is not available, it is the personal responsibility of the customer to have a properly

grounded, 3-prong wall receptacle installed by a qualified electrician.

Leveling the Medical Refrigerator

It is important for the medical refrigerator to be level in order to work

properly. It can be raised or lowered by rotating the plastic sheaths

around each of the feet on the bottom of the machine. If you find

that the surface is not level, rotate the feet until the medical

refrigerator becomes level .You may need to make several

adjustments to level it. We recommend using a carpenter’s level to

check the machine.

1. Place a carpenter’s level on top of the product to see if the

medical refrigerator is level from front to back and side to side.

2. Adjust the height of the feet as follows:

Turn the leveling feet to the right to lower that side of the

refrigerator.

Turn the leveling feet to the left to raise that side of the refrigerator.

Installing the Door Handle

To install the door handle:

1. Open the door and carefully pull the door gasket around the area where the handle is to

be installed.

2. Insert each Phillips head screw through the gasket side of the door until the screw passes

through the door.

3. Align the handle with the screws and tighten the screws with a Phillips head screwdriver

until the handle is flush against the door frame.

Caution: Do not over-tighten the screws as this may cause damage to the handle or to the

stainless steel door.

4. Carefully press the door gasket into its original position.

Inhaltsverzeichnis

Andere EdgeStar Kühlschrank Handbücher

EdgeStar

EdgeStar CBR1501SSOD Bedienungsanleitung

EdgeStar

EdgeStar OBR900SS Bedienungsanleitung

EdgeStar

EdgeStar CBR1501SLD Bedienungsanleitung

EdgeStar

EdgeStar FP430 Bedienungsanleitung

EdgeStar

EdgeStar CWF1700SZ Bedienungsanleitung

EdgeStar

EdgeStar OBR901SS Bedienungsanleitung

EdgeStar

EdgeStar CWF840SZ Bedienungsanleitung

EdgeStar

EdgeStar BR7000SSOD Bedienungsanleitung

EdgeStar

EdgeStar CWR301SZ Bedienungsanleitung

EdgeStar

EdgeStar CWF340DZ Bedienungsanleitung

EdgeStar

EdgeStar BR2001BL Bedienungsanleitung

EdgeStar

EdgeStar CWB2886FD Bedienungsanleitung

EdgeStar

EdgeStar CWR531SZ Bedienungsanleitung

EdgeStar

EdgeStar TWR120S Bedienungsanleitung

EdgeStar

EdgeStar CWF380DZ Bedienungsanleitung

EdgeStar

EdgeStar BWC120SLD Bedienungsanleitung

EdgeStar

EdgeStar BBR901BL Bedienungsanleitung

EdgeStar

EdgeStar CWR360FD Bedienungsanleitung

EdgeStar

EdgeStar BR1000SS Bedienungsanleitung

EdgeStar

EdgeStar OR320SS Bedienungsanleitung

EdgeStar

EdgeStar BWC121SS Bedienungsanleitung

EdgeStar

EdgeStar CWR1102DZ Bedienungsanleitung

EdgeStar

EdgeStar CWR300SZ Bedienungsanleitung

EdgeStar

EdgeStar OBR900SS Bedienungsanleitung

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Frigidaire

Frigidaire FSC23R5DW9 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung

Teledyne

Teledyne 6712FR and Betriebsanleitung

Matsui

Matsui MTT50W12E Bedienungsanleitung