TriFlo Spa Bath Pump
Congratulations on the purchase of your new TriFlo spa bath pump. The TriFlo spa bath
pump has been specifically designed for spa bath applications to ensure that you have
optimum spa jet performance and many years of trouble free operation.
The TriFlo pump internal design allows the water to self-drain so that there is minimal residue
water left in the pump when the spa is emptied in accordance with Local Health
Regulations when installed correctly.
TriFlo spa bath pumps are designed for spa bath operation only and should not be used in
chemically treated water or any other purpose without seeking written approval from
Edgetec Systems Pty Ltd for the application.
TriFlo Models and Operation Guide
Triflo pumps can be controlled by Air Switch (air tube operation), Electrical
touchpad (RJ45 cable), or radio remote control (Spa Key).
Auto-Heat: AH Model –air tube connect. The “Auto-Heat” TriFlo will help
maintain your spa bath water temperature during your spa by heat transfer. This
pump is activated by the air button installed on your bath.
Xtra-Heat: XH Model –air tube connect. The “Xtra-Heat” TriFlo has the integral
flat plate 700watt Stainless Steel heater built into the pump, this will maintain your
spa bath water temperature even in the largest spa baths. This pump is activated by
the air button installed on your bath.
EEZI-Touch:ET Model –RJ45 Cable. The “EEZI-Touch”
TriFlo has the integral flat plate 700watt Stainless Steel
heater built into the pump and a bath mounted touch
pad which allows you to control the pump from the baths
edge.
Depressing the touch pad button will turn your pump “on
or off”. When operating the Blue Led will light up.
The heating function will automatically come on once the pump has primed and
water is detected in the spa bath pump, if there is no water in the spa bath or
insufficient water in the pump the pump will automatically shut down to protect your
pump from running dry and causing potential damage to the mechanical seal.
The Green indicator light on the touch pad is showing that the communication
cable from the pump is fitted correctly and that there is power to the spa bath
pump.
Sensa-Touch: ST Model –RJ45 Cable. The “Sensa-
Touch” TriFlo has the integral flat plate 700watt Stainless
Steel heater built into the pump and a bath mounted
touch pad which allows you to control the Pump & Heater
function from the baths rim.
Depressing the Pump button will turn your pump “On or
Off”, if there is no water in the spa bath or insufficient
water in the pump the pump will automatically shut down to protect your pump
from running dry and causing potential damage to the mechanical seal.
The heating function will automatically come on once the pump has primed and
water is detected in the spa bath pump.
