Edgewater Networks EdgeMarc 5300LF2 Bedienungsanleitung

Edgewater Networks / 2895 Northwestern Parkway, Santa Clara, CA 95051

Phone: +1 (408) 351-7200 / Email: [email protected]

EWN021-01-A001

EdgeMarc 5300LF2

Enterprise Session Border

Controller

Quick Start Guide

Version 1.0

Before You Start

Please read this guide thoroughly as it describes the basic installation of

the device. Additional configuration needed to deploy the device in a

specific environment can be performed with the help of online help.

This guide also provides an example of a typical 5300LF2 deployment

that can be used as a guideline for your installation.

Requirements for Installation

•A computer with a web browser such as Microsoft Internet Explorer or

Mozilla Firefox or any other browser of your choice

•1 RJ-45 cable. You can use the included RJ-45 to female cable that is

provided with your device.

Instructions

Step 1 Connecting the Cables

1. Plug one end of the power adapter into an AC outlet and the other end into the AC inlet

on the 5300LF2, shown in the preceding image as "A".

2. Turn the power switch on (shown in the preceding image as "B").

3. Connect one end of an RJ-45 cable into the Console Port of the 5300LF2. This port can

be seen in the "A" of the following image. You can use the included RJ-45 to female DB9

cable. Connect the other end of the cable to your computer’s DB9 port.

Make sure that the power LED, shown in the previous image as "B" is solid green and

the status LED, shown in the previous image as "C", is flashing red intermittently.

Step 2 Configuring the EdgeMarc

You can configure the 5300LF2 using a web browser such as Internet Explorer or

Mozilla Firefox. The 5300LF2 is shipped with the pre-configured IP address

192.168.1.1 for the Console Port.

Requirement: To configure the 5300LF2 using the console port, you must use an

RJ-45 cable.

To connect to the 5300LF2 EdgeMarc with your PC, follow these steps:

1. Assign static IP address 192.168.1.2 with subnet 255.255.255.0 to a PC

2. Connect the PC to the console port of the 5300LF2 using an RJ-45 cable as

described in Step 1 – Connecting the Cables.

3. Launch a web browser on the PC and enter the URL string: 192.168.1.1. Press

Return.

The login window appears

4. Enter “root” in the “User name” field and “default” in the “Password” field.

5. The “System” page should appear next. If you should see the "message of

the day" instead, just click on the System link under “Configuration Menu” to

get to the “System” page.

Step 3 Plan Your Configuration

The EdgeMarc 5300LF2 can be deployed as a Session Border Controller in a network. It can

also be deployed in a network behind an existing firewall. For more information about deploying

your EdgeMarc behind a firewall, visit our support knowledgebase at

http://www.edgewaternetworks.com/kb

Note: When deploying VoIP services, all connected LAN switches or routers must support full

duplex.

Based on your deployment criteria, consult the following documents for further configuration:

•EdgeMarc 5300LF2 Enterprise Session Border Controller Hardware Installation Guide

•VoIP Operating System (VOS) for EdgeMarc User Manual

Edgewater Networks, Inc.

2895 Northwestern Parkway

Santa Clara, CA 95051

Phone: (408) 351-7200

[email protected]

Converged Networking. Simplified.

Inhaltsverzeichnis

Andere Edgewater Networks Netzwerk-Hardware Handbücher

Edgewater Networks

Edgewater Networks EdgeProtect 7300 Montageanleitung

Edgewater Networks

Edgewater Networks EdgeView 5300LF Bedienungsanleitung

Edgewater Networks

Edgewater Networks EdgeMarc 6400LF2 Handbuch

Edgewater Networks

Edgewater Networks EAP3030/1-I Bedienungsanleitung

Edgewater Networks

Edgewater Networks EdgeView 6400LF2 Handbuch

Edgewater Networks

Edgewater Networks EAP3030/1-O Bedienungsanleitung

Edgewater Networks

Edgewater Networks EdgeMarc 2900e Handbuch

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung