Edgewater Networks EdgeConnect 800PoE Bedienungsanleitung

EdgeConnect 800PoE

Managed Ethernet Switch

Quick Start Guide

Version 1.0

Before You Start

Thank you for the purchase of your EdgeConnect 800PoE Managed

Ethernet Switch.

Please read this guide thoroughly as it describes the basic connectivity to

the device. Refer to the User Manual for instructions on the physical

installation and power requirements of the 800PoE Switch.

Requirements for Installation

•A computer with a web browser such as Microsoft Internet Explorer or

Netscape Navigator or any other browser of your choice and an

available Ethernet port on it.

•At least one Ethernet cable

Page 1 of 6

Instructions

Step 1 −Connecting the Cables

1. If a fiber uplink is required then connect a Mini-GBIC SFP into the right most port in front

of the switch show in area “B”. Keep in mind that port 8 shown in area “B” will not be

operational once the fiber connector has been installed and is in use.

2. Connect one end of an Ethernet cable to any one of the ports shown in area “A” with the

exception of the port also shown in area “B” which can not be used if a fiber connector is

being used.

3. Connect the other end of the cable to your computer’s Ethernet port.

4. Plug one end of the power cable into an AC outlet and the other end into the power

receptacle on 800PoE on the back side of the device.

Page 2 of 6

Step 2 −Configuring the EdgeConnect

1. The EdgeConnect 800PoE comes preconfigured with 192.168.1.254 local LAN address

with a subnet mask of 255.255.255.0. Configure the IP address of your computer’s

Ethernet adapter that is connected to 800PoE to any address other than 192.168.1.1 in

the same subnet mask, for example 192.168.1.10.

2. Launch a web browser on the PC and enter the following URL: http://192.168.1.254 and

press Enter

3. The following web page should appear:

4. Enter “admin” in the Password field and click on the “Login” button.

5. The web page shown in the figure below should appear next.

Page 3 of 6

6. Continue configuring the switch using the “Configuration Menu” on the left side of the

web page and by referring to the user manual of the device.

Resetting the 800PoE switch to factory defaults

If you lose your password or the IP address of this switch, please follow the instructions below.

1. Remove the power cord from the back of the switch.

2. Remove all cables from the front-panel ports.

3. Connect port 1 to port 2 on the front panel, using a standard network cable.

Page 4 of 6

4. Reconnect the power cord to the rear of the switch.

5. Wait for at least 40 seconds before disconnecting port 1 from port 2.

After completing this procedure, the password will be “admin” and the network address will be

reset to the default value of 192.168.1.254.

Please visit our website at www.edgewaternetworks.com or contact the Edgewater Technical

Assistance Center at 408.351.7255 for additional information or assistance.

Edgewater Networks, Inc.

2730 San Tomas Expressway

Suite 200

Santa Clara, CA 95051

Phone: (408) 351-7200

[email protected]

Converged Networking. Simplified.

Page 5 of 6

Andere Handbücher für EdgeConnect 800PoE

Inhaltsverzeichnis

Andere Edgewater Networks Netzwerk-Router Handbücher

Edgewater Networks

Edgewater Networks 4200 Series Bedienungsanleitung

Edgewater Networks

Edgewater Networks 4562 Bedienungsanleitung

Edgewater Networks

Edgewater Networks EdgeMarc 4500 Series Bedienungsanleitung

Edgewater Networks

Edgewater Networks EdgeConnect 800PoE Bedienungsanleitung

Edgewater Networks

Edgewater Networks EdgeMarc 5300LF Bedienungsanleitung

Edgewater Networks

Edgewater Networks EdgeMarc 5300LF Handbuch

Edgewater Networks

Edgewater Networks EdgeMarc 6400LF Handbuch

Edgewater Networks

Edgewater Networks 200EW/E Bedienungsanleitung

Edgewater Networks

Edgewater Networks EdgeConnect 2402LFPoE Bedienungsanleitung

Edgewater Networks

Edgewater Networks 4200 Series Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung