Edimax BR-6104K Bedienungsanleitung

(

)

Version 1.0 / April 2007

-L

Če

ký

ý: Českého průvodce rychlou instalací naleznete na přiloženém CD s ovladači

: Finden Sie bitte das deutsche S.A.L. beiliegend in der Treiber CD

añ

ño

l: Incluido en el CD el G.R.I. en Español.

nç

ça

:Veuillez trouver l’français G.I.R ci-joint dans le CD

: Incluso nel CD il Q.I.G. in Italiano.

A magyar telepítési útmutató megtalálható a mellékelt CD-n

s: De nederlandse Q.I.G. treft u aan op de bijgesloten CD

i: Skrócona instrukcja instalacji w języku polskim znajduje sięna załączonej płycie

uê

ês

s: Incluído no CD o G.I.R. em Portugues

Ру

ус

сс

ск

ки

ий

й:

Найдите Q.I.G. на pусскoмязыке на приложеном CD

Tü

ür

kç

çe

:Ürün ile beraber gelen CD içinde Türkçe HızlıKurulum Kılavuzu'nu bulabilirsiniz

:Cd-ul cuprinde Ghid de instalare rapida in limba romana

transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in

any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without

the prior written permission of this company

This company makes no representations or warranties, either expressed or implied, with respect to the contents

hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Any

software described in this manual is sold or licensed "as is". Should the programs prove defective following their

purchase, the buyer (and not this company, its distributor, or its dealer) assumes the entire cost of all necessary

servicing, repair, and any incidental or consequential damages resulting from any defect in the software. Further,

this company reserves the right to revise this publication and to make changes from time to time in the contents

hereof without obligation to notify any person of such revision or changes.

The product you have purchased and the setup screen may appear slightly different from those shown in this

QIG. For more detailed information about this product, please refer to the User's Manual on the CD-ROM.The

software and specifications subject to change without notice. Please visit our web site www.edimax.com for the

and/or registered trademarks of their respective holders

Linux Open Source Code

Certain Edimax products include software code developed by third parties, including software code

subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL").

Please see the GNU (www.gnu.org) and LPGL (www.gnu.org) Web

sites to view the terms of each license.

The GPL Code and LGPL Code used in Edimax products are distributed without any warranty and are

subject to the copyrights of their authors. For details, see the GPL Code and LGPL Code

licenses. You can download the firmware-files at

http://www.edimax.com under "Download" page.

English Version.

1 Introduction：

1-1 Package Contents

Before you starting to use this router, please check if there’s anything missing in the package, and

contact your dealer of purchase to claim for missing items：

□Broadband router (main body, 1 pcs)

□Quick installation guide (1 pcs)

□User manual CDROM (1 pcs)

□12V Switching power adapter (1 pcs)

□Antenna (1pcs for 11g or 3 pcs for 11n Wireless Router Only )

1-2 Front Panel

PS：WLAN is for wireless router only .

LED

Name

Light

Status

Description

PWR ON Router is switched on and correctly powered

On Wireless network is switched on or WPS mode is on.

Off Wireless network is switched off

WLAN

Flashing Wireless LAN activity (transferring data).

On WAN port (Internet) is running at 100MbpsWAN

Off WAN port (Internet) is running at 10Mbps

10/100M Flashing WAN activity (transferring data)

On WAN port is connected

Off WAN port is not connected

WAN

LNK/ACT Flashing WAN activity (transferring data)

On LAN port is running at 100MbpsLAN

10/100M Off LAN port is running at 10Mbps

On LAN port is connected

Off LAN port is not connected

LAN

LNK/ACT Flashing LAN activity (transferring data)

1-3 Back Panel

Item Name Description

Power Power connector, connects to A/C power adapter

Reset The Reset button allows you to do one of two things：

1) If problems occur with your router, press the router’s reset

button with a pencil tip (for less than 5 seconds) and the

router will re-boot itself, keeping your original

configurations.

2) If problems persist or you experience extreme problems or

you forgot your password, press the reset button for

longer than 5 seconds and the router will reset itself to the

Antenna C

factory default settings (warning: your original

configurations will be replaced with the factory default

settings)

1 - 4 Local Area Network (LAN) ports 1 to 4

WAN Wide Area Network (WAN / Internet) port

Instructions for using the router to share the Internet with multiple PCs. (Power on the Modem and

the Router.)

1. Connect the Ethernet cable from the router’s WAN port to the LAN port of the modem.

2. Connect another Ethernet cable from the any LAN ports (1~4) on router to the Ethernet socket

on the PC.

3. Check to make sure the router’s LINK LED is lit; to confirm the cable connections are made

correctly.

1. Configure the PC LAN setting to automatically obtain an IP address from the router by following

below steps.

zClick “Start” in the task bar then select the “Control Panel” to open it.

zClick “Switch to Classic View” on the left top to see more setting icon…

zFind an icon “Network Connection” then Double-Click to open the network connection

setting.

zYou will see an icon “Local Area Connection”,click the icon then Right-Click the mouse to

open the sub-menu and select the “Properties” for setting the IP.

zSelect the “Internet Protocol (TCP/IP)” then click the “Properties”

zEnsure the parameter marked in blue are checked in “Obtain an IP address

automatically” and “Obtain DNS server address automatically” then press “OK” to

close.

2. Power on sequence for the networking devices and PC.

zFirstly, power off the modem followed by router and PC.

zSecond, power on the modem.

Third power on the router followed by PC for next step.

–

;

1. Enter the router’s default IP address: “192.168.2.1” into your PC’s web browser and press

“enter”.

2. The login screen below will appear. Enter the “User Name” and “Password” and click “OK” to

The default User name is “admin” and the Password is “1234”,

Note: It’s highly recommended to change and save Router's log-in settings in another

location.

Andere Handbücher für BR-6104K

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Edimax Netzwerk-Router Handbücher

Edimax

Edimax HP-8501 Bedienungsanleitung

Edimax

Edimax HP-8501 Bedienungsanleitung

Edimax

Edimax CV-7438nDM Bedienungsanleitung

Edimax

Edimax ES-1008PH Referenzhandbuch

Edimax

Edimax BR-6473AX Bedienungsanleitung

Edimax

Edimax BR-6424n Bedienungsanleitung

Edimax

Edimax BR-6435nD Bedienungsanleitung

Edimax

Edimax HP-8500 Bedienungsanleitung

Edimax

Edimax AR-7287WnA Bedienungsanleitung

Edimax

Edimax BR-6428nS V3 Bedienungsanleitung

Edimax

Edimax WatchGuard XTM 2 Series Montageanleitung

Edimax

Edimax ES-3124REM Bedienungsanleitung

Edimax

Edimax BR-6479Gn Bedienungsanleitung

Edimax

Edimax IC-1500 series Bedienungsanleitung

Edimax

Edimax EW-7811Un V2 Bedienungsanleitung

Edimax

Edimax AR-7287WnA Bedienungsanleitung

Edimax

Edimax AR-7267WnA Referenzhandbuch

Edimax

Edimax AR-7167WnA Bedienungsanleitung

Edimax

Edimax BR-6258n Nano router Gebrauchsanweisung

Edimax

Edimax CV-7438nDM Referenzhandbuch

Edimax

Edimax AR-7167WnA Bedienungsanleitung

Edimax

Edimax BR-6428n Bedienungsanleitung

Edimax

Edimax EW-7205APS Bedienungsanleitung

Edimax

Edimax Network Router Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise