Edimax EU-HB4S Bedienungsanleitung

Inhaltsverzeichnis

Andere Edimax Schalten Handbücher

Edimax

Edimax GS-3008P Bedienungsanleitung

Edimax

Edimax EK-PAK4 Bedienungsanleitung

Edimax

Edimax EK-08RO Bedienungsanleitung

Edimax

Edimax ES-5208P Bedienungsanleitung

Edimax

Edimax SP-1101W Bedienungsanleitung

Edimax

Edimax PS-3101P Bedienungsanleitung

Edimax

Edimax EK-PS2C Bedienungsanleitung

Edimax

Edimax GS-5424PLG Einrichtungshandbuch

Edimax

Edimax ES-1008P Bedienungsanleitung

Edimax

Edimax SP-2101W Bedienungsanleitung

Edimax

Edimax EK-PA2C Bedienungsanleitung

Edimax

Edimax ES-5844P Bedienungsanleitung

Edimax

Edimax ES-3305P Bedienungsanleitung

Edimax

Edimax ES-5844P Bedienungsanleitung

Edimax

Edimax ES-5824P Bedienungsanleitung

Edimax

Edimax ES-3305P V3 Bedienungsanleitung

Edimax

Edimax SP-1101W Bedienungsanleitung

Edimax

Edimax ES-3124RE+ Bedienungsanleitung

Edimax

Edimax EK-PAK2 Bedienungsanleitung

Edimax

Edimax EK-08RE Bedienungsanleitung

Edimax

Edimax EK-16RE Merkblatt

Edimax

Edimax ES-5500G Bedienungsanleitung

Edimax

Edimax EU-HB4M Bedienungsanleitung

Edimax

Edimax GS-3005P Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

USB 2.0 Slim HUB

Version 1.1

Contents

1.0 Introduction ………..…………………………….P.2

2.0 Features ……………….………………………….P.2

3.0 Specification ………………………………………..P.3

4.0 Installation …………...…………….………….…….P.3

- 1 -

USB 2.0 Slim HUB User's Manual

1.0 Introduction

This is designed in accordance to USB specification Rev 1.1/2.0 which act as a bridge

between the main computer host and the down stream USB devices. It is able to complement

PC serial interface by connecting a full range of peripherals, which is very simple and flexible

for the users.

There is one upstream port that connects to the PC host and there are four down steam ports

connecting up to 127 USB devices in a tiered-star configuration. It supports both full speed

(480M bps) and low speed (1.5M bps) devices which include keyboards, mice, scanner.

It is also protected by automatic per-port over-current detection and recovery and the LED

indicating the connection status and power source.

2.0 Features

zFull compliance with USB specification Rev. 1.1.

zWith one up-stream port and four down-stream ports.

zConnects up to 127 devices in a tiered star configuration.

zSupports both full-speed (12M bps) and low-speed (1.5M bps) devices.

zSelect between self-powered mode and bus-powered mode automatically.

zPer port over current detection/protection and power switch control.

zLED for bus-power, self-power and four down-stream connection status.

LED light

DC Jack

USB port

- 2 -

3.0 Specifications

-Upstream port 1

-Downstream port 4

-LED: 4 for BUS Power status when device connect.

The “GREEN” light is power .

The “RED” light is for USB 2.0 high speed.

-Enclosure: Plastic

-Per port Output current: 500mA

-Operating temperature: 0 degrees to 40 degrees

-Storage temperature: -20 degrees to 60 degrees

-Humidity: 0% ~ 80% RH

-Power Adapter 1.5 A , 6 V , 2.0 mm , out “ – “ , inside “ + “

4.0 Installation

1. Plug the DC plug into the DC jack and plug the AC adaptor into an electrical outlet.

Please check the electrical out let has the same voltage as the hub adaptor.

2. Plug Connector A into the USB port of host computer.

3. Plug Connector B into the upstream port of the hub.

4. Plug all the devices into downstream port of the hub.

5. When the hub is connected to the computer, the LED lights will sparkle.

- 3 -