Edimax ES-5500M V2 Bedienungsanleitung

ES-5500M V2 / ES-5800M V2

Quick Installation Guide

05-2012 / v1.0

publication may be reproduced, transmitted, transcribed, stored in a retrieval

system, or translated into any language or computer language, in any form or by

any means, electronic, mechanical, magnetic, optical, chemical, manual or

otherwise, without the prior written permission from Edimax Technology Co.,

Ltd.

Edimax Technology Co., Ltd. makes no representations or warranties, either

expressed or implied, with respect to the contents hereof and specifically

disclaims any warranties, merchantability, or fitness for any particular purpose.

Edimax Technology Co., Ltd. reserves the right to revise this publication and to

make changes from time to time in the contents hereof without the obligation to

notify any person of such revision or changes.

The product you have purchased and the setup screen may appear slightly

different from those shown in this QIG. The specification is subject to change

without notice. Please visit our web site www.edimax.com for the update. All

brand and product names mentioned in this manual are trademarks and/or

registered trademarks of their respective holders.

Edimax Technology Co., Ltd.

Add: No. 3, Wu‐Chuan 3rd Rd., Wu‐Ku Industrial Park, New Taipei City, Taiwan

Tel: +886‐2‐77396888

Email: sales@edimax.com.tw

PRODUCT INTRODUCTION

Model no.:

ES-5500M V2: 5-Port Gigabit Desktop Switch

ES-5800M V2:8-Port Gigabit Desktop Switch

Package Contents

Before you start using this switch, please check if there is anything missing in the

package, and contact your dealer to claim the missing item(s):

Gigabit desktop switch x 1

Quick installation guide x 1

Power cord x 1

Front Panel:

Please refer to the following description for the front panel:

ES-5500M V2

ES-5800M V2

LED Definitions:

LED Name

Light

Status

Description

PWR

Switch on and correctly powered

Off

Switch not powered or not correctly powered

LINK/ACT

Port is connected

Off

Port is not connected

Flashing

Port is active and transferring/receiving data.

Back Panel

ES-5500M V2

ES-5800M V2

Green: High-priority QoS ports

Yellow: Medium-priority QoS ports

Gray: Low-priority QoS ports

1. Operating Environment

This switch must be installed and operated within the operating limits of

temperature (0 to 40°C, 32 to 104°F) and humidity (10 to 90%

non-condensing).

Do not place objects on top of the unit.

Do not obstruct any vents on the sides of the unit.

Do not position the unit near any heat sources, such as heaters, radiators,

or direct exposure to the sun.

Prevent water and moisture from entering the unit. If necessary, use a

dehumidifier to reduce humidity.

2. Connecting to network devices

The RJ-45 ports on the switch support auto-MDI/MDIX, which allows

straight-through cross-over type cables to connect this switch to a workstation

or hub.

Connect one end of the network cable to the RJ-45 port on the rear panel, and

connect the other end of the network cable to the RJ-45 port on the network

device. Follow the same procedure to connect other RJ-45 ports on the switch.

The UTP network cables must comply with EIA/TIA 568 specifications and

Category 5 standards for data transmission. Maximum length for UTP cable is

100 meters (300 feet) between the switch and connected devices.

Once the network cable is connected at both ends and the attached network

device is powered on, the green LINK/ACT LED should be lit.

3. Connecting the power

Connect the power adapter to the power connector of the unit; the green

Power LED on the front panel should be lit.

Troubleshooting

1. Power LED is not lit

Check if the power cord is properly connected to the plug and the power

outlet; make sure the power cord is firmly plugged into the power socket of

the switch.

2. LINK/ACT LED is not lit when connect to devices

Make sure the network device attached to the switch is turned on.

Make sure the network cable is properly connected to the switch and the

network device.

Make sure the network cable is a UTP cable that complies with EIA/TIA 568

and Category 5 specifications.

Contact your dealer if problems persist.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of

the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

4. Consult the dealer or an experienced radio technician for help.

FCC Caution

This device and its antenna must not be co-located or operating in conjunction

with any other antenna or transmitter.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible

for compliance could void the authority to operate equipment.

CE Mark Warning

This is a class B product. In a domestic environment this product may cause radio

interference in which case the user may be required to take adequate measures.

Inhaltsverzeichnis

Andere Edimax Schalten Handbücher

Edimax

Edimax GS-5424PLC V2 Bedienungsanleitung

Edimax

Edimax 5/8 Ports Desktop Bedienungsanleitung

Edimax

Edimax EK-2U2C Bedienungsanleitung

Edimax

Edimax ES-5500G Bedienungsanleitung

Edimax

Edimax EK-08RE Bedienungsanleitung

Edimax

Edimax GS-5008E Bedienungsanleitung

Edimax

Edimax ES-5160G+ Bedienungsanleitung

Edimax

Edimax ES-5224RM+ Bedienungsanleitung

Edimax

Edimax GS-1008P Bedienungsanleitung

Edimax

Edimax EK-PAK4 Bedienungsanleitung

Edimax

Edimax EK-PA2C Bedienungsanleitung

Edimax

Edimax EU-HB4M Bedienungsanleitung

Edimax

Edimax Rackmount Fast Ethernet Switch Bedienungsanleitung

Edimax

Edimax EK-PS2P Bedienungsanleitung

Edimax

Edimax ES-3208P Bedienungsanleitung

Edimax

Edimax EK-08RO Bedienungsanleitung

Edimax

Edimax ES-3208P Bedienungsanleitung

Edimax

Edimax ES-5160G V2 Bedienungsanleitung

Edimax

Edimax ES-3305P Bedienungsanleitung

Edimax

Edimax ES-5824PH Bedienungsanleitung

Edimax

Edimax SP-1101W Bedienungsanleitung

Edimax

Edimax EK-PAK2 Bedienungsanleitung

Edimax

Edimax ES-5160G+ Bedienungsanleitung

Edimax

Edimax Hub Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung