Edimax GS-5008E Bedienungsanleitung

GS-5008E

User Manual

11-2021 / V1.0

Contents

I. Product Information.................................................1

I-1. Package Contents....................................................................... 1

I-2. Hardware Interface .................................................................... 2

I-3. LED Status.................................................................................. 2

II. Installation ..............................................................3

II-1 Connecting to Network............................................................... 3

II-2 Starting the Web-based Configuration Utility ............................. 4

II-3 Launching the Configuration Utility ............................................ 4

III.Web-based Switch Configuration .............................6

III-1 System Information.................................................................... 6

III-2 Management ............................................................................. 7

III-3 Port ........................................................................................... 8

III-4 VLAN.........................................................................................10

III-5 Link Aggregation.......................................................................11

III-6 Port Mirroring...........................................................................12

III-7 QoS...........................................................................................13

III-7-1. Disable QoS.........................................................................13

III-7-2. Port-Based QoS ...................................................................14

III-7-3. IEEE 802.1p QoS...................................................................15

III-8 Broadcast Storm Control ...........................................................16

III-9 Rate Limiting.............................................................................17

III-10 Loop Detect/Prevent .................................................................18

III-11 IGMP Snooping .........................................................................19

III-12 Password ..................................................................................20

III-13 Logout ......................................................................................21

I. Product Information

The Edimax Pro GS-5008E web-smart switch equipped with 8 Gigabit Ethernet

ports and rich web managed functions. This switch provides high-speed and

reliable data transfer ideal for network connectivity in the home, small office,

small-and-Medium business and enterprise environments.

You can find all supporting documents from the link below or via QR Code:

https://www.edimax.com/download

(Once you’ve visited the Edimax official website, please enter model no.

“GS-5008E”into the search box to search for your product.)

I-1. Package Contents

GS-5008E

Power Adapter

(5V)

Quick Installation

Guide

I-2. Hardware Interface

I-3. LED Status

LED

Color

Status

Description

PWR/SYS

Green

The switch is powered on

Flashing

The switch is booting up

Off

Power is disconnected or failed

Port 1-8

(LINK/ACT)

Amber

The Port is connected, Link at

10/100M

Flashing

Sending or receiving data

Off

The Port is disconnected or link

failure

Green

The Port is connected, Link at

1000M

Flashing

Sending or receiving data

Off

The Port is disconnected or link

failure

No.

Description

Reset

PWR/SYS

LAN Port x 8, LED (LINK/ACT)

DC Power Jack

II. Installation

Read the following topics and perform the procedures in the correct order.

Incorrect installation may cause damage to the product.

II-1 Connecting to Network

1. There are two ways to physically set up the switch.

˙Place the switch on a flat surface.

˙Wall-mount the switch. The product is designed with wall-mounted

holes. (The wall-mounted mounting screws and accessories are not

included.)

2. Connect the power adapter to the switch and the power outlet.

(Note: Make sure that the "PWR" LED is green.)

3. Plug the standard Cat5e Ethernet cable into the LAN port and connect it to

the computer and prepare for web-based configuration. (Note: Make sure

that the "LAN" LED is green or amber.)

4. Connect any networking device to the switch via Ethernet cable. (Note:

Make sure that the "LAN" LED is green or amber.)

5. Connect the router to the switch via Ethernet cable. (Note: Make sure that

the "LAN" LED is green or amber.) The hardware installation is complete!

２

３

４

Wall-Mount

Power On

Computer

Network Device

Router

II-2 Starting the Web-based Configuration Utility

This section describes how to navigate the web-based switch configuration

utility through web browser. Be sure to disable any browser pop-up blocker.

Browser Restrictions

If you are using older versions of Internet Explorer, you cannot directly use

an IPv6 address to access the device. You can, however, use the DNS

(Domain Name System) server to create a domain name that contains the

IPv6 address, and then use that domain name in the address bar in place

of the IPv6 address.

If you have multiple IPv6 interfaces on your management station, use the

IPv6 global address instead of the IPv6 link local address to access the

device from your browser.

II-3 Launching the Configuration Utility

1. Make sure your computer is connected with the switch then open a web

browser.

2. Enter the IP address of the switch you are configuring in the address bar

on the browser (factory default IP address is 192.168.2.1) and then press

Enter. Please make sure that your computer's IP address is in the same

subnet as this switch. The default IP address is an IP address in the range

of 192.168.2.X (X=2-254). You can modify the IP address of your

computer if you need.

Default IP

192.168.2.1

Default User Name

admin

Default Password

1234

3. The default username is “admin”and the default password is “1234”.

4. The first time that you log in with the default username and password,

you are required to set a new password.

III.Web-based Switch Configuration

The Web Smart switches provide rich functionalities. This chapter describes

how to use the web-based management interface (Web UI) to configure the

switch’s features.

III-1 System Information

This page shows system current information. It also allows user to edit some

system information.

To change the “Device Name”, click on the table title to edit.

Enter the new device name and click the “Apply”button

Item

Description

Model Name

Model name of the switch.

Device Name

System name of the switch. The Device name can be

modified.

Firmware

Version

Current running firmware image version.

MAC Address

Base MAC address of the switch.

IPv4 Address

Current system IPv4 address.

Subnet Mask

A 32-bit number that masks an IP address

Gateway

TCP / IP protocol under the gateway

Loop Status

Displays whether or not loops exist in the network

PoE Status

Display PoE status

III-2 Management

Use the Management Access pages to upgrade firmware, restore or backup

the configuration and configure settings of management access.

Inhaltsverzeichnis

Andere Edimax Schalten Handbücher

Edimax

Edimax ES-5208P Bedienungsanleitung

Edimax

Edimax ES-5260GM Bedienungsanleitung

Edimax

Edimax ER-5390P Bedienungsanleitung

Edimax

Edimax SP-1101W Bedienungsanleitung

Edimax

Edimax ES-5240G+ Bedienungsanleitung

Edimax

Edimax ES-5160G+ Bedienungsanleitung

Edimax

Edimax ES-5808P Bedienungsanleitung

Edimax

Edimax ES-5224RS+ Bedienungsanleitung

Edimax

Edimax ES-3116RE+ Bedienungsanleitung

Edimax

Edimax EK-08RE Bedienungsanleitung

Edimax

Edimax EK-2U2CA Bedienungsanleitung

Edimax

Edimax EK-PS2C Bedienungsanleitung

Edimax

Edimax EK-PS2C Bedienungsanleitung

Edimax

Edimax ER-5397P Bedienungsanleitung

Edimax

Edimax ES-5500G V2 Bedienungsanleitung

Edimax

Edimax EU-HB4M Bedienungsanleitung

Edimax

Edimax SP-2101W Bedienungsanleitung

Edimax

Edimax GS-1008PH Bedienungsanleitung

Edimax

Edimax EK-PAK2 Bedienungsanleitung

Edimax

Edimax ES-3116RL Bedienungsanleitung

Edimax

Edimax EK-PSK4 Bedienungsanleitung

Edimax

Edimax GS-5424PLC Bedienungsanleitung

Edimax

Edimax ES-3208P Bedienungsanleitung

Edimax

Edimax ES-3124RE+ Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung