Edimax Wireless LAN Access Point Bedienungsanleitung

Wireless LAN Access Point

IEEE 802.11g

54Mbps

User’s Manual

Table of Contents

Chapter 1 Introduction...................................................................................1

1.1 Package Contents....................................................................................2

1.2 Features ..................................................................................................2

1.3 Specifications..........................................................................................2

1.4 Physical Description................................................................................3

Chapter 2 Wireless LAN Access Point Connection..................................5

Chapter 3 Wireless LAN Access Point Configuration.............................6

3.1 Getting Started ........................................................................................6

3.2 Configuring the Access Point.................................................................10

3.2.1 Status and Information.......................................................................................10

3.2.2 Wireless Setting .................................................................................................10

3.2.3 Advanced Setting...............................................................................................18

3.2.4 Security..............................................................................................................20

3.2.5 MAC Address Filtering......................................................................................27

3.2.6 Radius Server .....................................................................................................29

3.2.7 System Utility....................................................................................................33

3.2.8 Configuration Tool.............................................................................................35

3.2.9 Firmware Upgrade .............................................................................................36

3.2.10 Reset...................................................................................................................37

Chapter 4 Troubleshooting..........................................................................38

Introduction

Chapter 1 Introduction

This product is an access point for IEEE 802.11g/b 2.4GHz wireless network. You

can use this access point to build up a wireless LAN.

The product supports WEP, ESSID and MAC address filter functions to consolidate

the wireless network security. With ESSID authentication, 64/128/152 bit WEP

encryption and MAC address filtering you can prevent unauthorized wireless stations

from accessing your wireless network.

The product’s dipole antenna is detachable by connecting to a RP-SMA connector.

Users can install a high gain antenna to the connector for better network link quality

so that you can build wireless network with more flexibility.

This product provides easy to use user interface and allows users to configuring from

web browser. Also it integrates DHCP server to provide multiple wireless and wired

users to get their IP address automatically. With the versatile of features, this product

is the best choice for you to integrate your wireless and wired network seamlessly.

Introduction

1.1 Package Contents

The Access Point includes the following items:

ŸOne Access Point

ŸOne Power Adapter

ŸOne User’s Manual

1.2 Features

ŸComplies with the IEEE 802.11g/b 2.4GHz specification.

ŸHigh data rate 54, 11, 5.5, 2 and 1Mbps network speed.

ŸSeamlessly integrate wireless and wired Ethernet LAN networks.

ŸProvides an internal 5-Port Fast Ethernet Switch for wired Ethernet

connection.

ŸAuto rate fallback in case of obstacles or interferences.

ŸProvide 64/128/152-bit WEP Data Encryption function to protect the

wireless data transmissions.

ŸBuilt-in DHCP server supports auto IP addresses assignment.

ŸSupports Web-based configuration.

1.3 Specifications

ŸStandards: IEEE 802.11g/b(Wireless), IEEE 802.3 (Wired)

ŸData Rate: 54/11/5.5/2/1Mbps auto fallback

ŸSecurity: 64/128/152-bit WEP Data Encryption

ŸFrequency Band: 2.400~2.4835GHz (Industrial Scientific Medical Band)

ŸRadio Technology: Direct Sequence Spread Spectrum (DSSS)

ŸAntenna:Externaldetachable dipole antenna (with RP-SMA connector)

ŸConnectors: 10/100Mbps RJ-45 x 1

ŸPower: 12VDC, 1A

ŸTransmit Power: 18dBm (Typical)

ŸLEDs: Power, LAN Link/Activity, Wireless Activity

ŸDimension: 30(H) x 187(W) x 100(D) mm

ŸTemperature:

Operating: 32~131°F (0~55°C)

Introduction

Storage: -4~158°F(-20~70°C)

ŸHumidity: 10-90% (Noncondensing)

ŸCertification: FCC, CE

1.4 Physical Description

Front Panel

On the Access Point’s front panel there are LED lights that inform you of the Access

Point’s current status. Below is an explanation of each LED.

LED Color Status Description

Lit Power is supplied.

Power Green Off No Power.

Flash Antenna is transmitting or receiving data.Wireless

Activity Green Off Antenna is not transmitting or receiving data.

On A valid link is established.

Flash It is transmitting or receiving data.

LAN

Link/Activity

Green Off No link is established.

Back Panel

Access Point’s connection ports are located on the back panel. Below is the

description of each connection port.

Introduction

ŸAntenna Connector

This round connection is standard Reverse SMA connector where any antennas

with Reverse SMA connector can connect to the Access Point.

ŸDC Adapter Port

Insert the power jack of the power adapter into this port.

ŸLAN Port

The Access Point’s LAN port is where you connect to your LAN’s network

devices.

ŸReset

The Reset button allows you to do one of two things.

1) If problems occur with your Access Point, press the reset button with a

pencil tip (for less than 4 seconds) and the Access Point will re-boot itself,

keeping your original configurations.

2) If problems persist or you experience extreme problems or you forgot your

password, press the reset button for longer than 4 seconds and the Access

Point will reset itself to the factory default settings (warning: your original

configurations will be replaced with the factory default settings).

Wireless LAN Access Point Connection

Chapter 2 Wireless LAN Access Point

Connection

1. Locate an optimum location for the Wireless LAN Access Point.

The best location for your Access Point is usually at the center of your wireless

network, with line of sight to all of your mobile stations.

2. Connect the Wireless LAN Access Point to your router, hub or switch.

Connect one end of standard UTP cable to the Access Point’s LAN Port and

connect the other end of the cable to a switch, a router or a hub. The Access Point

will then be connected to your existed wired LAN Network.

3. Connect the DC Power Adapter to the Wireless LAN Access Point’s Power

Socket.

Only use the power adapter supplied with the Access Point. Using a different

adapter may damage the product.

The Hardware Installation is complete.

Wireless LAN Access Point Configuration

Chapter 3 Wireless LAN Access Point

Configuration

3.1 Getting Started

This Access Point provides web-based configuration tool allowing you to configure

from wired or wireless stations. Follow the instructions below to get started

configuration.

From Wired Station

1. Make sure your wired station is in the same subnet with the Access Point.

The default IP Address and Sub Mask of the Access Point is:

Default IP Address: 192.168.2.1

Default Subnet: 255.255.255.0

Configure your PC to be in the same subnet with the Access Point.

1a) Windows 95/98/Me

1. Click the Start button and select Settings, then click Control Panel. The Control Panel

window will appear.

2. Double-click Network icon. The Network window will appear.

3. Check your list of Network Components.If TCP/IP is not installed, click the Add button to

install it now. If TCP/IP is installed, go to step 6.

4. In the Network Component Type dialog box, select Protocol and click Add button.

5. In the Select Network Protocol dialog box, select Microsoft and TCP/IPand then click the

OK button to start installing the TCP/IP protocol. You may need your Windows CD to

complete the installation.

6. After installing TCP/IP, go back to the Network dialog box. Select TCP/IP from the list of

Network Components and then click the Properties button.

7. Check each of the tabs and verify the following settings:

•Bindings: Check Client for Microsoft Networksand File and printer sharing for

Microsoft Networks.

•Gateway: All fields are blank.

•DNS Configuration: Select Disable DNS.

•WINS Configuration: Select Disable WINS Resolution.

Wireless LAN Access Point Configuration

•IP Address: Select Specify an IP Address. Specify the IP Address and Subnet Mask

as following example.

üIP Address: 192.168.2.3 (any IP address within 192.168.2.2~192.168.2.254 is

available, do not setup 192.168.2.1)

üSubnet Mask: 255.255.255.0

8. Reboot the PC. Your PC will now have the IP Address you specified.

1b) Windows 2000

1. Click the Start button and select Settings, then click Control Panel. The Control Panel

window will appear.

2. Double-click Network and Dial-up Connections icon. In the Network and Dial-up

Connection window, double-click Local Area Connection icon. The Local Area Connection

window will appear.

3. In the Local Area Connection window, click the Properties button.

4. Check your list of Network Components. You should see Internet Protocol [TCP/IP] on

your list. Select it and click the Properties button.

5. In the Internet Protocol (TCP/IP) Properties window, select Use the following IP address

and specify the IP Address and Subnet mask as following.

üIP Address: 192.168.2.3 (any IP address within 192.168.2.2~192.168.2.254 is

available, do not setup 192.168.2.1)

üSubnet Mask: 255.255.255.0

6. Click OK to confirm the setting. Your PC will now have the IP Address you specified.

1c) Windows NT

1. Click the Start button and select Settings, then click Control Panel. The Control Panel

window will appear.

2. Double-click Network icon. The Network window will appear. Select the Protocol tab from

the Network window.

3. Check if the TCP/IP Protocol is on your list of Network Protocols. If TCP/IP is not installed,

click the Add button to install it now. If TCP/IP is installed, go to step 5.

4. In the Select Network Protocol window, select the TCP/IP Protocol and click the Ok

button to start installing the TCP/IP protocol. You may need your Windows CD to

complete the installation.

5. After you install TCP/IP, go back to the Network window. Select TCP/IP from the list of

Network Protocols and then click the Properties button.

6. Check each of the tabs and verify the following settings:

Wireless LAN Access Point Configuration

•IP Address: Select Specify an IP address. Specify the IP Address and Subnet Mask

as following example.

üIP Address: 192.168.2.3 (any IP address within 192.168.2.2~192.168.2.254 is

available, do not setup 192.168.2.1)

üSubnet Mask: 255.255.255.0

•DNS:Let all fields are blank.

•WINS: Let all fields are blank.

•Routing: Let all fields are blank.

7. Click OK to confirm the setting. Your PC will now have the IP Address you specified.

2. Enter 192.168.2.1 from Web Browser to get into the Access Point’s

configuration tool.

3. A screen will be popped up and request you to enter user name and password.

The default user name and password is as follows.

User Name: Admin

Password: 1234

Enter the default user name and password, then press OKbutton directly.

4. You can start configuring the Access Point.

From Wireless Station

1. Make sure your wireless station is in the same subnet with the Access Point.

Please refer to the step 1 above for configuring the IP Address and Sub Mask of

the wireless station.

Andere Handbücher für Wireless LAN Access Point

Inhaltsverzeichnis

Andere Edimax Drahtloser Zugangspunkt Handbücher

Edimax

Edimax EW-7428HCn Bedienungsanleitung

Edimax

Edimax EW-7228APn Bedienungsanleitung

Edimax

Edimax EW-7209APg Bedienungsanleitung

Edimax

Edimax EW-7416APn Bedienungsanleitung

Edimax

Edimax EW-7301APg Bedienungsanleitung

Edimax

Edimax CV-7428nS Bedienungsanleitung

Edimax

Edimax EW-7303HPn V2 Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Edimax

Edimax EW-7428HCn Bedienungsanleitung

Edimax

Edimax OAP1300 Bedienungsanleitung

Edimax

Edimax EW-7438RPn V2 Betriebsanleitung

Edimax

Edimax CAP1750 Bedienungsanleitung

Edimax

Edimax EW-7206APg Bedienungsanleitung

Edimax

Edimax EW-7206APg Bedienungsanleitung

Edimax

Edimax EW-7205AP Bedienungsanleitung

Edimax

Edimax EW-7206APg Bedienungsanleitung

Edimax

Edimax CAP1300 Bedienungsanleitung

Edimax

Edimax EW-7416APn Bedienungsanleitung

Edimax

Edimax EW-7316APn Bedienungsanleitung

Edimax

Edimax EW-7208APC Bedienungsanleitung

Edimax

Edimax EW-7206APg Bedienungsanleitung

Edimax

Edimax EW-7206PDg Bedienungsanleitung

Edimax

Edimax EW-7416APn v2 Bedienungsanleitung

Edimax

Edimax EW-7478APC Installationsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung

Draytek

Draytek VIGORAP 902 Bedienungsanleitung