EINHELL RG-CM 36 Li Bedienungsanleitung

Art.-Nr.: 34.130.43 I.-Nr.: 11011 RG-CM 36 Li

Original operating instructions

Cordless Lawn Mower

Anleitung_RG_CM_36_Li_SPK7:_ 15.12.2010 13:18 Uhr Seite 1

Please fold out page 2-5

Anleitung_RG_CM_36_Li_SPK7:_ 15.12.2010 13:18 Uhr Seite 2

26459

Anleitung_RG_CM_36_Li_SPK7:_ 15.12.2010 13:18 Uhr Seite 3

3a 3b

3c 4

5a 5b

Anleitung_RG_CM_36_Li_SPK7:_ 15.12.2010 13:18 Uhr Seite 4

6a 6b

6c 7

8 9

Anleitung_RG_CM_36_Li_SPK7:_ 15.12.2010 13:18 Uhr Seite 5

1234

Anleitung_RG_CM_36_Li_SPK7:_ 15.12.2010 13:18 Uhr Seite 6

Table of contents

1. Safety information

2. Layout

3. Items supplied

4. Intended use

5. Technical data

6. Before starting the equipment

7. Using the equipment

8. Cleaning, maintenance and ordering of spare parts

9. Storage

10. Disposal and recycling

11. Troubleshooting guide

Anleitung_RG_CM_36_Li_SPK7:_ 15.12.2010 13:18 Uhr Seite 15

 Important.

When using the equipment, a few safety precautions

must be observed to avoid injuries and damage.

Please read the complete operating instructions and

safety information with due care. Keep these

operating instructions in a safe place so that the

information is available at all times. If you give the

equipment to any other person, hand over these

operating instructions and the safety information as

well. We cannot accept any liability for damage or

accidents which arise due to a failure to follow these

instructions and the safety information.

1. Safety information

Please refer to the booklet included in delivery for the

safety information.

 CAUTION

Read all the safety regulations and instructions.

Any errors made in following the safety information

and instructions set out below may result in an

electric shock, fire and/or serious injury.

Keep all safety information and instructions in a

safe place for future use.

This equipment is not designed to be used by people

(including children) with limited physical, sensory or

mental capacities or those with no experience and/or

knowledge unless they are supervised by a person

who is responsible for their safety or they have

received instructions from such a person in how to

use the equipment safely. Children must always be

supervised in order to ensure that they do not play

with the equipment.

Explanation of the warning signs on the

equipment (see Fig. 10)

1. Read the operating instructions before operating

the equipment.

2. Keep other people out of the danger area!

3. Caution: Sharp blades! Pull out the safety plug

before carrying out any repair work or if the power

cable is damaged. The blades will continue to

rotate after the motor is switched off.

4. Caution: Keep the power cable away from the

cutters!

2. Layout (Fig. 1 / 2)

1. ON/OFF switch

2. Safety lock-off

3. Battery cover

4. Battery

5. Safety plug

6. Grass bag

7. Ejector flap

8. Lever for height adjustment

9. Battery charger with power cable

10. Top push bar

11. Bottom push bar

12. Star nuts for top push bar

13. Quick-lock lever for bottom push bar

3. Items supplied (Fig. 2)

Open the packaging and take out the equipment

with care.

Remove the packaging material and any

packaging and/or transportation braces (if

available).

Check to see if all items are supplied.

Inspect the equipment and accessories for

transport damage.

If possible, please keep the packaging until the

end of the guarantee period.

IMPORTANT

The equipment and packaging material are not

toys. Do not let children play with plastic bags,

foils or small parts.

There is a danger of swallowing or suffocating!

Lawn mower

Debris bag

Battery

Safety plug

Battery charger with power cable

Original operating instructions

Safety information

Anleitung_RG_CM_36_Li_SPK7:_ 15.12.2010 13:18 Uhr Seite 16

4. Intended use

The lawn mower is intended for private use i.e. for

use in home and gardening environments.

Private use of the lawn mower refers an annual

operating time generally not exceeding that of 50

hours, during which time the equipment is primarily

used to maintain small-scale, residential lawns and

home/hobby gardens. Public facilities, sporting halls,

and agricultural/forestry applications are excluded.

Important. Due to the high risk of bodily injury to the

user, the lawn mower may not be used to trim

bushes, hedges or shrubs, to cut scaling vegetation,

planted roofs, or balcony-grown grass, to clean (suck

up) dirt and debris off walkways, or to chop up tree or

hedge clippings. Moreover, the lawn mower may not

be used as a power cultivator to level out high areas

such as molehills.

For safety reasons, the lawn mower may not be used

as a drive unit for other work tools or toolkits of any

kind, unless they have been expressly permitted by

the manufacturer.

The equipment may only be used for the tasks it is

designed to handle. Any other use is deemed to be a

case of misuse. The user/operator and not the

manufacturer will be liable for any damage or injuries

of any kind caused as a result of this.

Please note that our equipment has not been

designed for use in commercial, trade or industrial

applications. Our warranty will be voided if the

equipment is used in commercial, trade or industrial

businesses or for equivalent purposes.

5. Technical data

Idling speed: 3,000 min-1

Protection class: III

Weight: 17.3 kg

Cutting width: 370 mm

Volume of catch bag: 40 liters

Cutting height adjustment: 25-75 mm; 6 levels

Protection type: IPX1

Max. battery operating time: 35 min

Charging time: 2.5-4 h

Lithium-ion battery

Voltage: 36 V DC

Capacity: 2.6 Ah

Battery charger

Output voltage: 42 V DC

Output current: 1.0A

Sound and vibration

Sound and vibration values were measured in

accordance with EN 60335.

LpA sound pressure level 67.2 dB(A)

KpA uncertainty 2.5 dB(A)

LWA sound power level 90.6 dB(A)

KWA uncertainty 2.5 dB(A)

Wear ear-muffs.

The impact of noise can cause damage to hearing.

Total vibration values (vector sum of three directions)

determined in accordance with EN 60335.

Vibration emission value ah≤ 2.5 m/s²

K uncertainty = 1.5 m/s2

Warning!

The specified vibration value was established in

accordance with a standardized testing method. It

may change according to how the electric equipment

is used and may exceed the specified value in

exceptional circumstances.

Anleitung_RG_CM_36_Li_SPK7:_ 15.12.2010 13:18 Uhr Seite 17

The specified vibration value can be used to compare

the equipment with another electric power tools.

The specified vibration value can be used for initial

assessment of a harmful effect.

Reduce noise generation and vibration to a

minimum!

Use only equipment that is in perfect condition.

Maintain and clean the equipment regularly.

Adopt your way of working to the equipment.

Do not overload the equipment.

Have the equipment checked if necessary.

Switch off the equipment when not in use.

Wear gloves.

Residual risks

Even if you use this electric power tool in

accordance to instructions, certain residual risks

cannot be eliminated. The following hazards may

arise in connection with the equipment’s

construction and layout:

1. Lung damage if no suitable protective dust mask

is applied.

2. Damage to hearing if no suitable ear protection is

applied.

3. Health damage caused by hand-arm vibrations if

the equipment is used over a longer period or is

not properly guided and maintained.

6. Before starting the equipment

Fitting the push bar (Fig. 3a to 3b)

The push bar is fully pre-assembled and must only be

swung out and adjusted to the required height. To do

so, undo the star nuts (Figure 3a/Item 12) and unfold

the top push bar. Then secure the top push bar again

with the star nuts. Now release the quick-lock lever

(Figure 3b/Item 13) by flipping it open, move the push

bar to the required height and secure by flipping back

the quick-lock lever.

Fitting the grass box (Fig. 3c)

Before you fit the grass bag you must ensure that the

motor is switched off and the blade is not rotating. Lift

the ejector flap (Fig. 3c/Item 7) with one hand. With

the other hand, hold the grass bag by the handle and

hook it in from above (Fig. 3c).

Adjusting the cutting height (Fig. 4)

Important. Adjust the cutting height only when the

motor is switched off and the safety plug has been

pulled. Before you begin to mow, check to ensure that

the blade is not blunt and that none of the fasteners

are damaged. To prevent any imbalance, replace

blunt and/or damaged blades. To carry out this

check, first switch off the motor and pull out the safety

plug. The cutting height is adjusted as shown in

Figure 4.

To do so, push the lever of the cutting height

adjustment (Figure 4/Item 8) inwards, select the

required cutting height by moving the lever to the left

or right and pull back the lever to one of the six

graduations (Figure 4/Item A-F). Make sure that the

lever engages properly.

Position A

Cutting height: 25 mm

Position B

Cutting height: 35 mm

Position C

Cutting height: 45 mm

Position D

Cutting height: 55 mm

Position E

Cutting height: 65 mm

Position F

Cutting height: 75 mm

Battery

The equipment is fitted with a lithium-ion battery. The

battery pack is completely closed and maintenance

free.

Battery charge level indicator (Fig. 5a to 5b)

The battery pack is equipped with a pushbutton for

checking the charge level. Simply press the

pushbutton (Figure 5a/Item A) to read off the battery

level from the LEDs:

All 3 level monitoring LEDs are lit (Figure 5a):

Battery charge level is high.

2 level monitoring LEDs are lit: Battery charge

level is decreasing. Stop work as soon as

possible.

1 level monitoring LED is lit: Battery is flat.

Stop work IMMEDIATELY and charge the battery.

Otherwise the battery’s service life will be greatly

shortened.

Malfunction LED is lit (Figure 5b): The battery is

defective. Do not continue to use the battery

Anleitung_RG_CM_36_Li_SPK7:_ 15.12.2010 13:18 Uhr Seite 18

Andere Handbücher für RG-CM 36 Li

Inhaltsverzeichnis

Andere EINHELL Rasenmäher Handbücher

EINHELL

EINHELL RG-EM 1536 HW Bedienungsanleitung

EINHELL

EINHELL GH-PM 40 P Bedienungsanleitung

EINHELL

EINHELL GC-PM 47/2 S HW Bedienungsanleitung

EINHELL

EINHELL GE-CLM 18/320 BL Bedienungsanleitung

EINHELL

EINHELL GE-CM 18/32 Li Bedienungsanleitung

EINHELL

EINHELL GC-PM 51/2 S HW-E Bedienungsanleitung

EINHELL

EINHELL FREELEXO CAM Bedienungsanleitung

EINHELL

EINHELL GE-PM 48 S-H B&S Bedienungsanleitung

EINHELL

EINHELL GE-CM 43 LI M Bedienungsanleitung

EINHELL

EINHELL GE-PM 53 VS HW B&S Bedienungsanleitung

EINHELL

EINHELL GE-CM 33 Li Kit Bedienungsanleitung

EINHELL

EINHELL FREELEXO LCD BT+ Bedienungsanleitung

EINHELL

EINHELL GC-HM 300 Bedienungsanleitung

EINHELL

EINHELL GE-CM 36/47 S HW Li Bedienungsanleitung

EINHELL

EINHELL 34.130.00 Bedienungsanleitung

EINHELL

EINHELL GC-HM 30 Bedienungsanleitung

EINHELL

EINHELL GE-TM 102 Bedienungsanleitung

EINHELL

EINHELL NEW GENERATION EM 1650 Bedienungsanleitung

EINHELL

EINHELL BG-HM 30 Bedienungsanleitung

EINHELL

EINHELL 46 B&S Bedienungsanleitung

EINHELL

EINHELL 34.044.90 Bedienungsanleitung

EINHELL

EINHELL GE-CM 18/30 Li Bedienungsanleitung

EINHELL

EINHELL GC-EM 1032 Bedienungsanleitung

EINHELL

EINHELL GE-CM 36/43 Li M Bedienungsanleitung

Beliebte Rasenmäher Handbücher anderer Marken

RHINO

RHINO 1958 Bedienungsanleitung

Wolf Garten

Wolf Garten Compact plus 40 B Bedienungsanleitung

Cub Cadet

Cub Cadet LTX 1045 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Bedienungsanleitung

Challenge

Challenge CH18V2 Betriebsanleitung

TALEN TOOLS

TALEN TOOLS AVR HGM30 Bedienungsanleitung

DEWEZE

DEWEZE ATM-725 Bedienungsanleitung

Weed Eater

Weed Eater 180083 Bedienungsanleitung

Husqvarna

Husqvarna Poulan Pro PP185A42 Bedienungsanleitung

Better Outdoor Products

Better Outdoor Products Quick Series Bedienungsanleitung

Cub Cadet

Cub Cadet 23HP Z-Force 60 Betriebsanleitung

MTD

MTD 795, 792, 791, 790 Bedienungsanleitung

Toro

Toro Groundsmaster 3505-D Bedienungsanleitung

Dennis

Dennis FT 610 Bedienungsanleitung

MTD

MTD 126-220-000 Bedienungsanleitung

Toro

Toro 74806 Bedienungsanleitung

Stihl

Stihl RMA 443 PV Bedienungsanleitung

Yard-Man

Yard-Man 3700-0 Bedienungsanleitung