EK-Quantum Vector RX 6700XT Backplate Bedienungsanleitung

USER GUIDE

BACKPL AT E

EK-Quantum

Vector RX 6700XT Backplate

This product is intended for installation by expert users only. Please

consult with a qualiﬁed technician. Improper installation may result

in damage to your equipment. EK assumes no liability whatsoever,

expressed or implied, for the use of this product or its installation.

The following instructions are subject to change without notice.

Please, read the manual carefully before beginning with the

installation process. For updates, you can visit our ofﬁcial website

www.ekwb.com.

Before you start using this product, please follow these basic guidelines:

Carefully read the manual before beginning with the

installation process.

Remove your graphics card from the computer for the safest

mounting process, to prevent any possible damage to your

GPU or its circuit board (PCB).

- 3 -

TABLE OF CONTENTS

BOX CONTENTS 4

BACKPLATE DIMENSIONS 5

REQUIRED TOOLS 5

INSTALLING THE BACKPLATE 6

PREPARING THE GRAPHICS CARD 6

CUTTING AND PLACING THERMAL PADS 6

ATTACHING THE BACKPLATE 7

TESTING THE LOOP 8

WARRANTY 8

SUPPORT AND SERVICE 9

SOCIAL MEDIA 9

- 4 -

BOX CONTENTS

8 mm

M2.5 x 8 AX1 Screw - Nickel (8 pcs)

M2.5 x 8 AX1 Screw - Black (8 pcs)

Thermal PAD G 1.5mm - (120x24mm) (2 pcs)

120 mm

24 mm

120 mm

24 mm

Thermal PAD G 1.0mm - (120x24mm) (2 pc)EK-Quantum Vector RX 6700XT Backplate

Mounting mechanism - You may not need all

the screws, mounting mechanism is universal!

EAN:103301

- 5 -

BACKPLATE DIMENSIONS

249.6 mm

101.9 mm6.2 mm

Phillips Head Screwdriver Scissors

REQUIRED TOOLS

- 6 -

INSTALLING THE BACKPLATE

STEP 1

PREPARING THE GRAPHICS CARD

First, complete the installation of your EK-Quantum Vector RX

6700XT water block according to its installation manual.

In case the water block is already installed, remove the seven (7) AX1

screws and their PVC washers, as shown in the image.

STEP 2

CUTTING AND PLACING THERMAL PADS

Your backplate comes with thermal pads that have to be cut into

smaller pieces to cover all the VRM components. EK made sure to

provide you with more than an adequate quantity of thermal pads to

complete this Step.

CAUTION: You must remove the protective foil from both

sides of the thermal pad before installation.

Replacement thermal pads:

2x Thermal PAD G 1.0 mm - (120 x 24 mm)– EAN: 3830046996770

2x Thermal PAD G 1.5 mm - (120 x 24 mm) - EAN: 3830046996787

STEP 1

STEP 2

120 mm

24 mm

1 mm

Thermal PAD G 1.0 mm (120 x 24 mm)

120 mm

24 mm

1.5 mm

Thermal PAD G 1.5mm (120 x 24 mm)

- 7 -

STEP 3

Once cut to size thermal pads should be applied to the backplate as

shown in the image.

STEP 3

Thermal Pad G 1.0 mm

Thermal Pad G 1.5 mm

G1.0

G1.0 G1.0

G1.0

G1.5

STEP 4

ATTACHING THE BACKPLATE

Place the backplate on the PCB and make sure all holes are aligned.

Position an M2.5x8 AX1 screw in each of the seven (7) mounting

holes (as shown in the image) and tighten them evenly with a

Phillips head screwdriver. Do not use excessive force!

For this Step, you will need:

STEP 4

Phillips Head

Screwdriver

M2.5 x 8 AX1

7 pcs

8 mm

7x M2.5 x 8 AX1 Screw

- 8 -

TESTING THE LOOP

To ensure the installation of EK components was successful, we

recommend you perform a 24-hour leak test.

When your loop is complete and ﬁlled with coolant, connect the pump

to a PSU outside your system. Do not connect power to any of the other

components. Turn on the PSU and let the pump run continuously.

Inspect all parts of the loop, and in case the coolant leaks, ﬁx the issue

and repeat the testing process. To prevent possible damage, please

ensure that all hardware is dry before the system is powered on.

WARRANTY

Our products are warranted against defects of materials and quality

for a period of 24 months, starting with the date of delivery to the

end-user. During this period, products will be repaired or have parts

replaced at our discretion, provided that 1) the product is returned

to the agent from whom it was purchased; 2) the product has been

purchased by the end-user and has not been used for commercial

purposes; 3) the product has not been misused, handled carelessly,

or used in a manner other than the way described in the instructions

manual. This warranty does not confer rights other than those

expressly set out above and does not cover any claims for

consequential loss or damage. This warranty is offered as an extra

beneﬁt and does not affect your statutory rights as a consumer. This

warranty is voided if the product comes in contact with aggressive

UV additives or other improper liquids. EK water blocks are sealed

with a warranty-voiding circular label, proving the water block has

withstood a pressure leak test. Removing the label will void the

leak-free guarantee, but not the guarantee on the product itself.

Any other RMA issues can be reported to EK Customer Support at

www.ekwb.com/support for further analysis.

In case you need assistance or wish to order spare parts or a new

mounting mechanism, please contact:

https://www.ekwb.com/customer-support/

For spare parts orders, refer to the page with “BOX CONTENTS”

where you can ﬁnd the EAN number of each part you might need.

Include the EAN number with quantity in your request. Mounting

Mechanism EAN can be found under “BOX CONTENTS”

Thermal pads are readily available in the EK shop

EKWaterBlocks

@EKWaterBlocks

ekwaterblocks

EKWBofﬁcial

SUPPORT AND SERVICE

SOCIAL MEDIA

Inhaltsverzeichnis

Andere EK-Quantum Computerhardware Handbücher

EK-Quantum

EK-Quantum Momentum ROG Maximus XII Hero Bedienungsanleitung

EK-Quantum

EK-Quantum Momentum2 ROG Strix X570-i Gaming D-RGB Bedienungsanleitung

EK-Quantum

EK-Quantum Vector FE RTX 3090 Ti D-RGB + Backplate Bedienungsanleitung

EK-Quantum

EK-Quantum Vector RTX 3080/3090 Backplate Bedienungsanleitung

EK-Quantum

EK-Quantum Momentum MSI Z590 Carbon D-RGB Bedienungsanleitung

EK-Quantum

EK-Quantum Velocity2 D-RGB -LGA 1700 Bedienungsanleitung

EK-Quantum

EK-Quantum Vector2 XC3 RTX 3080 D-RGB Bedienungsanleitung

EK-Quantum

EK-Quantum Impulse 120mm FAN Bedienungsanleitung

EK-Quantum

EK-Quantum Vector2 FTW3 RTX 3080 D-RGB Bedienungsanleitung

EK-Quantum

EK-Quantum Vector2 Strix RTX 3080 D-RGB Bedienungsanleitung

EK-Quantum

EK-Quantum MSI MPG X670E CARBON EK X D-RGB Bedienungsanleitung

EK-Quantum

EK-Quantum Vector2 Strix RTX 3080 D-RGB Bedienungsanleitung

EK-Quantum

EK-Quantum Monoblock Series Bedienungsanleitung

EK-Quantum

EK-Quantum Vector XC3 RTX 3070 D-RGB Bedienungsanleitung

EK-Quantum

EK-Quantum Vector Master RTX 4090 D-RGB Bedienungsanleitung

EK-Quantum

EK-Quantum Vector RTX 3080/3090 Backplate Bedienungsanleitung

EK-Quantum

EK-Quantum Vector2 Strix RTX 3080 D-RGB Bedienungsanleitung

EK-Quantum

EK-Quantum Vector2 Red Devil RX 7900 XTX D-RGB Bedienungsanleitung

EK-Quantum

EK-Quantum EK-Classic GPU Water Block Strix RTX 3070... Bedienungsanleitung

EK-Quantum

EK-Quantum Velocity 2 D-RGB AM4 Bedienungsanleitung

EK-Quantum

EK-Quantum Vector2 Strix RTX 3080 D-RGB Bedienungsanleitung

EK-Quantum

EK-Quantum Vector2 FTW3 RTX 3080 D-RGB Bedienungsanleitung

EK-Quantum

EK-Quantum Kinetic FLT 80 D5/DDC Body Bedienungsanleitung

EK-Quantum

EK-Quantum Momentum2 ROG Strix X570-i Gaming D-RGB Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung