EKO Commercial Sinks Bedienungsanleitung

INSTALLATION GUIDE

Commercial Sinks

(2016)

EKO Living Elements, LLC | April, 2016 PAGE 2

READ CAREFULLY!

BRACKETS MUST BE INSTALLED BEFORE SHEETROCK

INSTALLATION.

ALL SINKS REQUIRE TWO PRIMARY (LARGER) BRACKETS.

ALL SINKS GREATER THAN 40” LONG REQUIRE TWO OR MORE

SECONDARY (SMALLER) BRACKETS.

DISTANCE BETWEEN ANY TWO BRACKETS MUST NOT BE MORE

THAN 36” APART ON CENTER.* ADDITIONAL SECONDARY

BRACKETS MAY NEED TO BE PROVIDED TO MEET THIS

REQUIREMENT DEPENDING ON SINK LENGTH.

DISTANCE BETWEEN THE TWO PRIMARY BRACKETS IS DEPENDENT

ON SINK LENGTH. REVIEW AVAILABLE MATERIALS.

*Rule does not apply to trough sinks, see trough sink installation pages for details (Page 7-8)

EKO Living Elements, LLC | April, 2016 PAGE 3

COMMERCIAL “INCLINE” SINK INSTALLATION

Bracket Placement:

-Brackets are to be mounted with thru-bolts through a sturdy upright support such as

a 2x4 stud or other similarly strong member.

-The distance between any two brackets cannot be more than 36”. Secondary

brackets should be centered between the primary brackets (refer to pictures on

page 4). Additional secondary brackets may be needed depending on sink length.

-The sink must have a finished height of 34”from the ground to meet ADA

compliancy. It is recommended to install the brackets at shown heights and shim the

sinks to a finished height of 34”.

EKO Living Elements, LLC | April, 2016 PAGE 4

Auxiliary Support:

-An auxiliary support

will be needed that will span the

distance between the two primary

brackets. Typically, an appropriately

sized wooden stud is sufficient.

-The support will be

flush with the top of the primary

brackets as shown in the picture.

-Fasten the support by

any means necessary.

Sink Mounting:

-USE CAUTION. The

sinks can be easily damaged or

chipped. Be careful to avoid possible

collisions or scratches at all times.

-Mount the sink onto

the brackets and support using

construction adhesive to secure the

sink in place as shown in the picture.

EKO Living Elements, LLC | April, 2016 PAGE 5

COMMERCIAL “RETTANGOLO” SINK INSTALLATION

Bracket Placement:

-Brackets are to be mounted with thru-bolts through a sturdy upright support such as

a 2x4 stud or other similarly strong member.

-The distance between any two brackets cannot be more than 36”. Secondary

brackets should be centered between the primary brackets (refer to picture on page

6). Additional secondary brackets may be needed depending on sink length.

-The sink must have a finished height of 34”from the ground to meet ADA

compliancy. It is recommended to install the brackets at shown heights and shim the

sinks to a finished height of 34”.

EKO Living Elements, LLC | April, 2016 PAGE 6

Auxiliary Support:

-An auxiliary support

will be needed that will span the

distance between the two primary

brackets. Typically, an appropriately

sized wooden stud is sufficient.

-The support will be

flush with the top of the primary

brackets as shown in the picture.

-Fasten the support by

any means necessary.

Sink Mounting:

-USE CAUTION. The

sinks can be easily damaged or

chipped. Be careful to avoid possible

collisions or scratches at all times.

-Mount the sink onto

the brackets and support using

construction adhesive to secure the

sink in place as shown in the picture.

EKO Living Elements, LLC | April, 2016 PAGE 7

COMMERCIAL “TROUGH” SINK INSTALLATION

Bracket Placement:

-Brackets are to be mounted with thru-bolts through a sturdy upright support such as

a 2x4 stud or other similarly strong member.

-The distance between the two secondary brackets must be at 10”apart on center

and centered between the two primary brackets (refer to picture on page 8).

Additional secondary brackets may be needed if the trough sink has multiple basins.

-The sink must have a finished height of 34”from the ground to meet ADA

compliancy. It is recommended to install the brackets at shown heights and shim the

sinks to a finished height of 34”.

EKO Living Elements, LLC | April, 2016 PAGE 8

Auxiliary Support:

-An auxiliary support

will be needed that will span the

distance between the two primary

brackets. Typically, an appropriately

sized wooden stud is sufficient.

-The support will be

flush with the top of the primary

brackets as shown in the picture.

-Fasten the support by

any means necessary.

Sink Mounting:

-USE CAUTION. The

sinks can be easily damaged or

chipped. Be careful to avoid possible

collisions or scratches at all times.

-Mount the sink onto

the brackets and support using

construction adhesive to secure the

sink in place as shown in the picture.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Kohler

Kohler K-6228 Montageanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Kohler

Kohler K-12183 Montageanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Kohler

Kohler Centerset K-15240 Montageanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

Kohler

Kohler Mira Eco Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Bristan

Bristan PS2 BAS C D2 Verdrahtungsschema