Ekwb EK-Quantum Kinetic FLT D5/DDC Body D-RGB Bedienungsanleitung

INSTALLATION MANUAL

EKQuantum

Kinetic FLT D5/DDC Body D-RGB

- 2 -

There are many ways to install your EK-Quantum Volume/Kinetic FLT

D5/DDC Body as it utilizes a standard fan mounting hole pattern with

15mm spacing, the same as all EK radiators. The mounting holes have

standard M4 threads with maximum engagement of 10mm. Use of

longer screws or screws with incorrect threads such as those intended

for fans or radiators may damage your product!

Before you start using this product please follow these basic guidelines:

Please carefully read the manual before beginning with the

installation process!

The EK ﬁttings require only a small amount of force to screw

them ﬁrmly in place since the liquid seal is ensured by the

rubber o-ring gaskets.

The use of corrosion inhibiting coolants is always recommended

for any liquid cooling system. EKWB recommends any of the

EK-Cryofuel for worry-free usage.

- 3 -

TABLE OF CONTENT

D5 PUMP VERSION 4

ATTACHING THE D5 PUMP ON TO THE RESERVOIR 4

DDC PUMP VERSION 5

ATTACHING THE DDC PUMP ON TO THE RESERVOIR 5

CONNECTING THE D-RGB LED STRIP 6

TESTING THE LOOP 7

SUPPORT AND SERVICE 8

SOCIAL MEDIA 8

- 4 -

ATTACHING THE D5 PUMP ON TO THE RES

ERVOIR

STEP 1:

Remove the preinstalled Pump Holder using 2.5mm Allen Key. Store

the screws and pump holder for later use.

STEP 1

D5 PUMP VERSION

STEP 2:

Make sure that the gasket( o- ring) is placed into the groove.

STEP 2

M4X20

DIN7984

Screw

Pump

holder

52 x 3 Gasket

- 5 -

DDC PUMP VERSION

ATTACHING THE DDC PUMP ON TO THE

RESERVOIR

STEP 1

Remove the preinstalled Pump Holder and screws using 2.5mm

Allen Key. Store the pump holder for later use.

STEP 3

Carefully attach the D5 Pump and Pump Holder(as shown on the

photo). After that, secure all the parts together with M4X20 DIN

7984 Screws. Tighten the screws using enclosed 2.5mm Allen Key.

STEP 3

M4X20

DIN7984

Screw

D5 Pump

holder

STEP 1

M4X20

DIN7984

Screw

Pump

holder

- 6 -

STEP 2

Carefully attach the DDC pump and make sure that gasket (46x2.5) is

placed correctly. Sealing gasket is included in additional bag. Secure

the pump with four (4) M4 X 25 7984DIN screws (see sample photo).

Tighten the screws using enclosed 2.5mm Allen Key.

STEP 2

CONNECTING THE D-RGB LED STRIP

Plug the 3-pin connector from the water block’s D-RGB LED light in

the D-RGB HEADER on the motherboard. The LED will work if the pin

layout on the header is as follows: +5V, Digital.

Please ensure that the arrow indicated on the connector is

plugged into the +5V line as indicated on your motherboard.

Failure to do so will damage your motherboard or LED strip.

D-RGB Header

RGB Header

M4 X 25

DIN7984 Screw

DDC

Pump

- 7 -

TESTING THE LOOP

To make sure the installation of EK components was successful, we

recommend you perform a leak test for 24 hours.

When your loop is complete and ﬁlled with coolant, connect the

pump to a PSU outside of your system. Do not connect power to

any of the other components. Turn on the PSU and let the pump

run continuously. It is normal for the coolant level to drop during this

process as air collects in the reservoir.

Inspect all parts of the loop, and in the eventuality that coolant leaks,

ﬁx the issue and repeat the testing process. Ensure that all hardware is

dry before the system is powered on in order to prevent any damage.

For assistance please contact:

http://support.ekwb.com/

EKWB d.o.o.

Pod lipami 18

1218 Komenda

Slovenia - EU

EKWaterBlocks

@EKWaterBlocks

ekwaterblocks

EKWBofﬁcial

SUPPORT AND SERVICE

SOCIAL MEDIA

Inhaltsverzeichnis

Andere ekwb Computerhardware Handbücher

ekwb

ekwb EK-Quantum Vector2 Trio RTX 3080/90 ABP Set... Bedienungsanleitung

ekwb

ekwb EK-FC780 GTX Ti Series Bedienungsanleitung

ekwb

ekwb EK-FC Titan Z water block Handbuch

ekwb

ekwb EK-DBAY DCP 2.2 Handbuch

ekwb

ekwb EK-FB MSI X299 GAMING PRO CARBON RGB... Bedienungsanleitung

ekwb

ekwb EK-Quantum Magnitude Bedienungsanleitung

ekwb

ekwb EK-Vector Trio RTX 2080 Ti Bedienungsanleitung

ekwb

ekwb EK-PRO GPU WB AMP-Trinity RTX 4090 Ni+Inox Bedienungsanleitung

ekwb

ekwb EK-FC Radeon Vega Strix Backplate Handbuch

ekwb

ekwb EK-FC1080 GTX Ti TF6 Bedienungsanleitung

ekwb

ekwb 3831109831335 Leitfaden

ekwb

ekwb EK-FC1080 GTX FTW Leitfaden

ekwb

ekwb EK-D5 Dual TOP CSQ Handbuch

ekwb

ekwb EK-FC R9-295X2 Leitfaden

ekwb

ekwb EK-FC1080 GTX Ti Strix Bedienungsanleitung

ekwb

ekwb EK-FB KIT GA-X99 SOC Champion Series Handbuch

ekwb

ekwb EK-XRES DCP 2.2 Reservoir Handbuch

ekwb

ekwb EK-SB ASUS M6G Leitfaden

ekwb

ekwb EK-FC 780 GTX DCII Series Handbuch

ekwb

ekwb EK-FB ASUS R5-E10 Leitfaden

ekwb

ekwb EK-FC Titan X Leitfaden

ekwb

ekwb EK-FC6990 Handbuch

ekwb

ekwb EK-Quantum Reflection2 PC-O11D EVO D5 PWM... Bedienungsanleitung

ekwb

ekwb EK-Supremacy MX AMD Series Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

Intel

Intel NUC 12 Pro Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung

Advantech

Advantech ASMB-935 Series Bedienungsanleitung

Jupiter

Jupiter RAM PACK Bedienungsanleitung

ekwb EK-Quantum Kinetic FLT D5/DDC Body D-RGB Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken