Ekwb EK-Quantum Reflection2 PC-O11D EVO D5 PWM... Bedienungsanleitung

USER GUIDE

DISTRIBUTION PLATE

EKQuantum

Reﬂection2MEG Prospect 700R D-RGB – Plexi

Please note the installation of the product is intended to be

undertaken by an adequately trained and experienced person.

You are installing the product at your own risk. If you are not

properly trained or experienced or feel unsure about the

installation procedure, please refrain from installing the product

yourself and contact our tech support for assistance. We disclaim

our liability for any damages to the product as well as incidental,

consequential, or indirect damages incurred due to improper or

inappropriate installation

Before you start using this product please follow these basic guidelines:

Please carefully read the manual before beginning with the

installation process!

The EK Fittings require only a small amount of force to screw

them ﬁrmly in place since the liquid seal is ensured by the

rubber O-ring gaskets.

The use of corrosion inhibiting coolants is always recommended

for any liquid cooling system. EKWB recommends any of the

EKCryofuel for worry-free usage.

- 3 -

TABLE OF CONTENT

BOX CONTENTS 4

DISTRIBUTION PLATE DIMENSIONS 5

TECHNICAL SPECIFICATIONS AND PRODUCT PARTS 6

PREPARING THE MEG PROSPECT 700R CASE 7

INSTALLATION OF “EK-Quantum Reﬂection2MEG Prospect 700R D-RGB – Plexi” DISTRIBUTION PLATE INTO CHASSIS 8

RECOMMENDED DISTRIBUTION PLATE CONFIGURATIONS 10

FLOW DIAGRAM 12

CONNECTING THE D-RGB LED STRIP 13

CONNECTING THE PUMP 13

TESTING THE LOOP 14

SUPPORT AND SERVICE 15

SOCIAL MEDIA 15

- 4 -

BOX CONTENTS

10 mm

EK-Quantum Reﬂection2MEG Prospect

700R D-RGB - Plexi, EAN: 3831109859797

Screw M4 x 10 DIN7984 (6 pcs)

Allen Key 2.5 mm (1 pc)

Allen Key 2 mm (1 pc)

EK-Loop Multi Allen Key (1 pc)

Mounting mechanism Reﬂection2 MEG Prospect 700R EAN: 106447

Metal Washer M4 x 0.8 (6 pcs)

- 5 -

DISTRIBUTION PLATE DIMENSIONS

17.5 mm

45.5 mm

73.5 mm

19 mm

71 mm

167.6 mm

188.6 mm

84.1 mm

237.6 mm

258.6 mm

286.6 mm

314.6 mm

341 mm

369 mm

397 mm

416 mm

71.3 mm

19 mm

130 mm

26.8 mm

72.6 mm

30.3 mm

19 mm

369 mm

45.5 mm

- 6 -

TECHNICAL SPECIFICATIONS AND PRODUCT PARTS

Technical Speciﬁcation:

Dimensions with the attached pump (W x D x H): 416 x 130 x 72.6 mm

– D-RGB LED count: 19

– D-RGB cable length: 500 mm

– D-RGB connector standard 3-pin (+5V, Data, Blocked, Ground)

Position EAN Description Quantity

19061 Screw M3 x 25 DIN7991 3

28311 Screw M4 x 20 DIN7984 4

38206 Screw M4 x 12 7991DIN 41

45154 Pump OR 52 x 3 mm 1

53831109834282 Plug Cover (Black) 10

63831109813898 EK-D5 PWM (12V SATA) 1

7104310 OR Set 1

8104290 Sticker - MSI Branding 1

9104289 LED Cover (Black Elox) 1

10 104287 Backplate 1

11 104286 TOP plate (Plexi) 1

12 102639 EK-Plug G1/4 (Nickel) 12

13 101803 Pump Mount 1

14 100815 LED D-RGB Strip 500/400 mm 1

15 100663 EK-Badge 1

- 7 -

PREPARING THE MEG PROSPECT 700R CASE

STEP 1

Remove the front and back panel of your MEG PROSPECT 700R

case.

STEP 2

Remove the back cable cover panel, the bottom storage shroud and

front bracket with fans. If there are any additional fans or brackets

blocking insertion of the distribution plate, we suggest you remove

those as well.

STEP 1

- 8 -

STEP 2

Once you have successfully mounted the “EK-Quantum Reﬂection2

MEG Prospect 700R D-RGB – Plexi “ distribution plate on the bracket

outside the case, place it and tighten it from the back side of the case

after the holes are aligned properly and the orientation is as seen in

STEP 2 picture.

STEP 2

INSTALLATION OF “EK-Quantum Reﬂection2MEG Prospect 700R D-RGB – Plexi” DISTRIBUTION PLATE INTO CHASSIS

STEP 1

Place the “EK-Quantum Reﬂection2MEG Prospect 700R D-RGB –

Plexi “distribution plate as high as possible on the bracket and loosely

tighten the screws so you can still barely move the distribution plate.

Bracket and distribution plate must be aligned as seen in STEP 1

picture. This step is crucial if you want to install straight tubing with

MATRIX7 compliance.

STEP 1

M4 x 10 DIN7984

(5x)

MOUNTING

BRACKET

For this step you will need:

Allen Key 2.5 mm

- 9 -

STEP 3

Matrix7 compliance:

When you have secured the “EK-Quantum Reﬂection2MEG

Prospect 700R D-RGB – Plexi” distribution plate inside the case,

align it with your GPU water block and CPU water block ports for

Matrix7 compliance and tighten the loose screws from STEP 1 on

the back side of the distribution plate bracket.

STEP 3

CPU OUTLET

CPU INTLET

GPU OUTLET

GPU INTLET

- 10 -

RECOMMENDED DISTRIBUTION PLATE CONFIGURATIONS

TOP RADIATOR

INLET

USING BOTH RADIATORS

FRONT RADIATOR

OUTLET

GPU OUTLET

FRONT RADIATOR

INLET

Note that the top or front radiator is completely optional and a

closed loop without either one can be completed.

To complete your loop, all ports must be used as marked in the

image.

All remaining unused ports must be closed with supplied plugs,

using the EK-Loop Multi Allen Key.

If one of the prescribed components will not be installed

(ie. The Front radiator or GPU block) then one INLET and

one OUTLET port must still be joined together in order

for this distribution plate to function!

Only one INLET and one OUTLET port for the GPU

connection can be used, while all other INLET and

OUTLET GPU ports must be closed with G1/4 plugs

(enclosed in the package).

TOP RADIATOR

OUTLET

CPU OUTLET

CPU INLET

GPU INLET

Andere Handbücher für EK-Quantum Reflection2 PC-O11D EVO D5 PWM...

Inhaltsverzeichnis

Andere ekwb Computerhardware Handbücher

ekwb

ekwb Classic D-RGB S240 Bedienungsanleitung

ekwb

ekwb EK-FC7970 Handbuch

ekwb

ekwb EK-PRO GPU WB AMP/Trinity RTX 4090 - Ni +... Bedienungsanleitung

ekwb

ekwb EK-FC1080 GTX Ti Aorus RGB Bedienungsanleitung

ekwb

ekwb EK-FC780 GTX WF3 Handbuch

ekwb

ekwb EK-DBAY DCP 2.2 Handbuch

ekwb

ekwb EK-FC680 GTX FTW Leitfaden

ekwb

ekwb EK-Quantum Kinetic FLT D5/DDC Body D-RGB Bedienungsanleitung

ekwb

ekwb EK X Series Bedienungsanleitung

ekwb

ekwb EK-Quantum Kinetic TBE 120 VTX PWM Bedienungsanleitung

ekwb

ekwb EK-FC Bedienungsanleitung

ekwb

ekwb EK-FCW8100 Leitfaden

ekwb

ekwb EK-MOSFET ASUS M7G Leitfaden

ekwb

ekwb EK-FB RE2 Leitfaden

ekwb

ekwb EK-Pro GPU WB RTX 4000 - Ni + Inox Bedienungsanleitung

ekwb

ekwb EK-Quantum Vector2 Trio RTX 3080/90 ABP Set... Bedienungsanleitung

ekwb

ekwb EK-FB KIT GA-X99 LE Leitfaden

ekwb

ekwb EK-Quantum Momentum2 ROG Strix Z690-I Gaming D-RGB -... Bedienungsanleitung

ekwb

ekwb EK-Classic Pump Reservoir 160 SPC PWM D-RGB Handbuch

ekwb

ekwb EK-FC7850 Leitfaden

ekwb

ekwb EK-FB KIT ASUS R5-E10 Leitfaden

ekwb

ekwb EK-QuantumX Loophole Distroplate D5 PWM Bedienungsanleitung

ekwb

ekwb EK-Vector Radeon VII Backplate Bedienungsanleitung

ekwb

ekwb EK-FC 5870 V2 Handbuch

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

Intel

Intel NUC 12 Pro Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung

Advantech

Advantech ASMB-935 Series Bedienungsanleitung

Jupiter

Jupiter RAM PACK Bedienungsanleitung

ekwb EK-Quantum Reflection2 PC-O11D EVO D5 PWM... Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken