Ekwb EK-Quantum Momentum2 ROG Strix Z690-I Gaming D-RGB -... Bedienungsanleitung

USER GUIDE

EK-Quantum

Momentum2ROG Strix X670E-I D-RGB

MONOBLOCK

Please note the installation of the product is intended to be undertaken

by an adequately trained and experienced person. You are installing the

product at your own risk. If you are not properly trained or experienced or

feel unsure about the installation procedure, please refrain from installing

the product yourself and contact our tech support for assistance. We

disclaim our liability for any damages to the product as well as incidental,

consequential, or indirect damages incurred due to improper or

inappropriate installation.

Before you start using this product, please follow these basic guidelines:

Please carefully read the manual before beginning the

installation process.

The EK Fittings require only a small amount of force to screw

them ﬁrmly in place since the liquid seal is ensured by the

rubber O-ring gaskets.

The use of corrosion-inhibiting coolants is always recommended

for liquid cooling systems, and mandatory for nickel-plated

water blocks.

Do not use pure distilled water! For best results, EK recommends

the use of EK-Cryo Fuel coolants.

Make sure to thoroughly bleed air out of your water block, or

you will not reach optimal performance

- 3 -

TABLE OF CONTENTS

BOX CONTENTS 4

WATER BLOCK DIMENSIONS 5

TECHNICAL SPECIFICATIONS AND WATER BLOCK PARTS 6

PREPARING THE MOTHERBOARD 7

CUTTING AND PLACING THERMAL PADS 8

INSTALLING THE WATER BLOCK 9

FITTINGS AND TUBING 11

CONNECTING THE D-RGB LED STRIP 12

TESTING THE LOOP 12

WARRANTY 13

SUPPORT AND SERVICE 14

SOCIAL MEDIA 14

- 4 -

BOX CONTENTS

Velocity2Mounting Screw AM5 (Ni) (1 pc)

EK-Quantum Momentum2ROG Strix X670E-I D-RGB - Plexi

Allen Key 2 mm (1 pc)Allen Key 2.5 mm (1 pc)

Tx7 L-Shaped Wrench (1 pc)

Thermal grease (1 pc)

Thermal Pad F 1.0 mm (1 pc)

(3830046996732)

120 mm

16 mm

- 5 -

WATER BLOCK DIMENSIONS

13 mm

89 mm

70 mm

98 mm

122 mm

23 mm

- 6 -

TECHNICAL SPECIFICATIONS AND WATER BLOCK PARTS

Technical Speciﬁcation:

Dimensions (L x H x W): 89 x 121.5 x 34 mm

D-RGB cable length: 50 cm

D-RGB LED count: 17

D-RGB connector standard 3-pin (+5V, Data, Blocked, Ground

Position EAN Description Quantity

1106257 Mid plate (Nickel) 1

2105915 Coldplate (Nickel) 1

3105901 Jet Plate AM5 (Metal) 1

4104773 Coldplate OR 53 x 2.5 mm 1

5104686 Screw M4 x 14 DIN7991 4

6106260 TOP Plate (Plexi) 1

7106037 Mounting Screw AM5 (Nickel) 4

8100747 Spring M3 x 10 mm 8 kg 4

98252 Screw M3 x 10 DIN7991 8

10 103007 LED Strip 1

11 100663 EK Badge 1

12 104444 Mylar sticker 1

13 104774 OR 8 x 1.5 1

14 106261 Standout (Acetal) 1

15 5131 OR 100 x 1.5 1

16 5163 OR 18 x 1.5 1

- 7 -

PREPARING THE MOTHERBOARD

STEP 1

IIf already installed, please remove the motherboard from your

computer and place it on an even surface.

STEP 2

Using a Philips head screwdriver remove the four UNC 6-32 screws

securing the original plastic hold-down clamps around the socket

as shown in the illustration. Remove the original AMD® backplate

and the hold-down clamps and store them away.

STEP 3

Cleaning the CPU: Wipe the IHS clean using a non-abrasive cloth or

Q-tip as shown in the illustration.

STEP 3

UNC 6-32 SCREW

IHS

NON-ABRASIVE

CLOTH

HOLD-DOWN

CLAMPS

STEP 2

- 8 -

CUTTING AND PLACING THERMAL PADS

STEP 1

EK-Quantum Momentum2ROG Strix X670E-I D-RGB B water block

comes with a thermal pad that has to be cut into smaller pieces to

cover the area.

Please remove the protective foil from both sides of the

thermal pads prior to installation!

Replacement thermal pads:

Thermal Pad F 1.0 mm – (120 x 16 mm) EAN: 3830046996732

For this step, you will need:

Scissors

STEP 1

Thermal Pad F – 1.0 mm (120 x 16 mm)

120 mm

16 mm

1 mm

Thermal Pad - 120 x 16 x 1.0 mm

- 9 -

STEP 2

Applying thermal compound: Apply the enclosed thermal grease

(thermal compound) on the CPU heat spreader – IHS – as shown in

the image. The layer of the thermal compound must be thin and even

in thickness over the entire surface of the IHS.

The excessive or uneven application of thermal grease

may lead to poor performance!

Thermal Grease

For this step, you will need:

STEP 1

Before placing the water block, removing the protective foil from the

backside is mandatory.

STEP 1

INSTALLING THE WATER BLOCK

PROTECTIVE

STICKER

- 10 -

WATER BLOCK

MOUNTING SCREW (4x)

STEP 2

Position the CPU Water Block onto the Motherboard. Make sure to

align the holes (as shown in the picture).

Before placing the water block, it is mandatory to remove

the protective foil from the backside.

Make sure to double-check the layer of the Thermal Grease

before placing the water block onto the motherboard.

STEP 3

Secure the water block from the backside of the motherboard using

the included Tx7 L-Shaped wrench.

Tighten the mounting screws in an anti-clockwise direction. Start

fastening the screws in a cross pattern. Do not tighten fully until all of

the screws are partially screwed in.

The Tx7 L-Shaped wrench must be used in a standing position!

Otherwise, the mounting screws may crack during tightening!

STEP 3

Tx7 L-Shaped wrench

For this step, you will need:

Andere Handbücher für EK-Quantum Momentum2 ROG Strix Z690-I Gaming D-RGB -...

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ekwb Computerhardware Handbücher

ekwb

ekwb EK-Quantum Vector2 Trio RTX 3080/90 ABP Set... Bedienungsanleitung

ekwb

ekwb EK-PRO GPU WB AMP-Trinity RTX 4090 Ni+Inox Bedienungsanleitung

ekwb

ekwb EK-Quantum Vector RE RTX 3080 Active Backplate... Bedienungsanleitung

ekwb

ekwb EK-FC Radeon Vega Strix Backplate Handbuch

ekwb

ekwb EK-FC 6970 Handbuch

ekwb

ekwb EK-Quantum Reflection2 PC-O11D EVO D5 PWM... Bedienungsanleitung

ekwb

ekwb EK-Quantum Vector Trinity RTX 3080/3090 Bedienungsanleitung

ekwb

ekwb CPU Lignum Bedienungsanleitung

ekwb

ekwb EK-FC R9-280X DCII Bedienungsanleitung

ekwb

ekwb EK-Quantum Kinetic TBE DDC PWM Series Bedienungsanleitung

ekwb

ekwb EK-FC1080 GTX Ti FTW3 Bedienungsanleitung

ekwb

ekwb EK-Quantum Magnitude sTRX4 Bedienungsanleitung

ekwb

ekwb EK-Quantum Vector Trinity RTX 3080/3090 Bedienungsanleitung

ekwb

ekwb EK-FC R9-290X Backplate Handbuch

ekwb

ekwb EK-D5 Dual TOP Leitfaden

ekwb

ekwb EK-FC980 GTX TF5 Handbuch

ekwb

ekwb EK-FC1080 GTX G1 Bedienungsanleitung

ekwb

ekwb EK-FC 780 GTX DCII Original CSQ Handbuch

ekwb

ekwb EK-Quantum Reflection2 PC-O11D EVO D5 PWM... Bedienungsanleitung

ekwb

ekwb EK-FCW9000 Leitfaden

ekwb

ekwb EK-FB KIT GA Z97X-SOC Force Leitfaden

ekwb

ekwb EK-FB ASRock X299 RGB Monoblock Bedienungsanleitung

ekwb

ekwb EK-FC590 GTX Handbuch

ekwb

ekwb EK-RES X3 D-RGB Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

Intel

Intel NUC 12 Pro Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung

Advantech

Advantech ASMB-935 Series Bedienungsanleitung

Jupiter

Jupiter RAM PACK Bedienungsanleitung

ekwb EK-Quantum Momentum2 ROG Strix Z690-I Gaming D-RGB -... Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken