Elcometer 1537 Bedienungsanleitung

English

Elcometer 1537

ISO Scratching Tool

Operating Instructions

English

is a registered trademark of Elcometer Instruments Ltd.

All other trademarks acknowledged.

system or otherwise) or translated into any language, in any form or by any means (electronic, mechanical,

magnetic, optical, manual or otherwise) without the prior written permission of Elcometer Instruments Ltd.

Doc.No. TMA-0359 Issue 01

Text with Cover No: 19807

CONTENTS

Section Page

1 About this instrument . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

2 Using your scratching tool. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

3 ISO 2063 scratch test parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

4 Technical specification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

5 Related equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Thank you for your purchase of this Elcometer 1537 ISO Scratching Tool. Welcome to Elcometer.

Elcometer are world leaders in the design, manufacture and supply of inspection equipment for coatings

and concrete. Our products cover all aspects of coating inspection, from development through application

to post application inspection.

This Elcometer 1537 ISO Scratching Tool is a world beating product. With the purchase of this product you

now have access to the worldwide service and support network of Elcometer. For more information visit our

website at www.elcometer.com

1 ABOUT THIS INSTRUMENT

The Elcometer 1537 ISO Scratching Tool is a simple but effective instrument which is used to scratch the

surface of samples in preparation for adhesion, salt spray and corrosion tests. The tool is held horizontally

and pulled across the sample to produce the scratch.

The Elcometer 1537 has a tungsten carbide blade which is set to give a 90° cutting angle with a 75° cutting edge.

This tool can be used to prepare specimens for testing to ISO 2063, ISO 7253 and NBN 755 standards.

1.1 WHAT THE BOX CONTAINS

• Elcometer 1537 ISO Scratching Tool

• Storage case

• Operating instructions

Your Elcometer 1537 ISO Scratching Tool is packed in a cardboard and foam package. Please ensure that

this packaging is disposed of in an environmentally sensitive manner. Consult your local Environmental

Authority for further guidance.

2 USING YOUR SCRATCHING TOOL

2.1 BEFORE YOU START

Ensure the blade of your Elcometer 1537 ISO Scratching Tool is sharp and undamaged.

2.2 PRODUCING A SCRATCH

1. Hold the instrument as shown below.

2. Place the cutting edge on the sample.

3. Exert slight downward pressure.

4. Pull the blade across the sample.

3 ISO 2063 SCRATCH TEST PARAMETERS

Use the tool to produce a lattice pattern of scratches in accordance with the following dimensions:

The depth of the scratch should be such that the coating is cut through to the substrate.

4 TECHNICAL SPECIFICATION

Blade material: Tungsten carbide

Cutting angle: 90°

Cutting edge: 75°

Approximate

surface covered

by the lattice

Thickness of

coating

(µm)

Distance

between

scratches

(mm)

15 mm x 15 mm ≤200 3

25 mm x 25 mm > 200 5

5 RELATED EQUIPMENT

In addition to the Elcometer 1537 ISO Scratching Tool, Elcometer produces a wide range of other coating

testing equipment.

Users of the Elcometer 1537 ISO Scratching Tool may also benefit from the following Elcometer products:

• Elcometer 1538 DIN Scratching Tool

• Elcometer Multi Function Scratch Tester

• Elcometer Continuous Humidity Chambers

• Elcometer Stackability and Internal Stress Meters

• Elcometer Elasticity and Resistance to Deformation Testers

• Elcometer Appearance Meters

• Elcometer Coating Thickness Gauges

For further information contact Elcometer or your local supplier. Details of Elcometer offices around the

world are given on the outside cover of these operating instructions. Alternatively visit the Elcometer

website, www.elcometer.com

Inhaltsverzeichnis

Andere Elcometer Werkzeuge Handbücher

Elcometer

Elcometer SAGOLA Junior G Bedienungsanleitung

Beliebte Werkzeuge Handbücher anderer Marken

Martor

Martor SECUNORM 175 Bedienungsanleitung

ERKCO

ERKCO 1000 Bedienungsanleitung

jbc

jbc N4473 Bedienungsanleitung

FEINMETALL

FEINMETALL FZWZ-SET-001 Bedienungsanleitung

Worx Professional

Worx Professional Sonicrafter WU676 Bedienungsanleitung

Gage Bilt

Gage Bilt GB713SH Bedienungsanleitung

Hilti

Hilti DX 9-ENP Bedienungsanleitung

norbar

norbar NORTRONIC 34399 Bedienungsanleitung

BGS technic

BGS technic 8578 Bedienungsanleitung

Makita

Makita DHR241 Bedienungsanleitung

Motor Guard

Motor Guard JMB-1250 Bedienungsanleitung

Power Adhesives

Power Adhesives 805-12 Bedienungsanleitung

Clemco

Clemco 24189 Bedienungsanleitung

VVG

VVG VNG 903 Series Bedienungsanleitung

Hilti

Hilti FX 3-A Bedienungsanleitung

Grizzly

Grizzly H6472 Bedienungsanleitung

axing

axing BWZ 5-02 Bedienungsanleitung

Dh-Robotics

Dh-Robotics RGI-100 Anleitung zur Verwendung