Electrohome EANOS700 Bedienungsanleitung

Thank you for your purchase of this Electrohome product. Please read this instruction manual carefully before

using product to ensure proper use. Keep this manual in a safe place for future reference.

www.electrohome.com

INSTRUCTION MANUAL

SIGNATURE MUSIC SYSTEM

EANOS700

- 2 -

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET

UNLESSTHE BLADES CAN BE FULLY INSERTEDTO PREVENT BLADE EXPOSURE.TO PREVENT FIRE OR SHOCK HAZARD, DO NOT

EXPOSETHIS APPLIANCE TO RAIN OR MOISTURE.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers)

that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with

one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or

the third prong is provided for your safety. If the provided plug does not t into you outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and point

where they exit from the apparatus.

11. Only use attachments / accessories specied by the manufacturer.

12. Unplug this apparatus during lightning storms or when unused for long periods of time.

13. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any

way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,

the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

14. This appliance shall not be exposed to dripping or splashing water and no object lled with liquids such as vases shall

be placed on the apparatus.

15. Do not overload wall outlet. Use only power source as indicated.

16. Use replacement parts as specied by the manufacturer.

17. The product may be mounted to a wall only if recommended by the manufacturer.

18. Upon completion of any service or repairs to this product, ask the service technician to perform safety checks.

The lightning ash with arrowhead

symbol within an equilateral triangle

is intended to alert the user to the

presence of uninsulated dangerous

voltage within the product’s enclosure

that may be of sucient magnitude

to constitute a risk of electric shock to

persons.

The exclamation point within an

equilateral triangle is intended

to alert the user to the presence

of important operating and

maintenance (servicing) instructions

in the literature accompanying the

appliance.

WARNING:TO REDUCETHE RISK OF

ELECTRIC SHOCK DO NOT REMOVE

COVER (OR BACK), NO USER

SERVICEABLE PARTS INSIDE REFER

SERVICINGTO QUALIFIED SERVICE

PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

- 3 -

CLASS 1

LASER PRODUCT

APPAREIL À LASER DE CLASSE 1

PRODUCTO LASER DE CLASE 1

CAUTION

INVISIBLE LASER RADIATION

WHEN OPEN AND INTERLOCKS DEFEATED.

AVOID EXPOSURETO BEAM

• Avoid installing this unit in places exposed to direct sunlight or close to heat radiating appliances such as electric

heaters, on top of other stereo equipment that radiates too much heat, places lacking ventilation or dusty areas,

places subject to constant vibration and/or humid or moist areas.

• Do not attempt to clean this unit with chemical solvents as this might damage the nish. Use a clean dry cloth.

• Operate controls and switches as described in the manual. Before turning on the power, make certain that power

cord is properly installed.

• Store your CDs in a cool area to avoid damage from heat.

• When moving the set, be sure to rst disconnect the power cord.

FCC INFORMATION:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference toradio communications. However, there isno guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Re-orient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2)This device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT

Since digital circuitry may cause interference to other radio or television tuners nearby, switch this unit o when not in use

or move it away from the aected radio/television tuner.

NOTE:This digital apparatusdoes not exceed the ClassB limits for radionoise emissions fromdigital apparatus asset out in

the Radio Interference Regulations of Industry Canada.These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with

theinstructions,maycauseharmfulinterferencetoradiocommunications.However,thereisnoguaranteethatinterference

will not occur in a particular installation. If this equipment does cause harmful interference to radio or television operation

(which can be determined by turning the equipment o), the user is encouraged to try to correct the interference by one

or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

IMPORTANT SAFETY INSTRUCTIONS

- 4 -

Important Safety Instructions ..................................................................................................................... 2

What’s Included ........................................................................................................................................... 4

Buttons and Connections ............................................................................................................................. 5

Preparation for Use ...................................................................................................................................... 7

Unpacking and Setup........................................................................................................................... 7

Power Source ....................................................................................................................................... 7

Battery installation for Remote Control................................................................................................ 7

Raising and Lowering the Lid............................................................................................................... 8

Protect Your Furniture .......................................................................................................................... 8

Operation..................................................................................................................................................... 8

Powering on the Unit........................................................................................................................... 8

AUX IN Operation ................................................................................................................................. 8

Inserting and Playing a CD................................................................................................................... 9

USB Operation...................................................................................................................................... 9

Removing the USB ..............................................................................................................................10

Playing in MP3 Mode .........................................................................................................................10

Memory Function................................................................................................................................10

Listening to the Radio.........................................................................................................................11

Playing Records...................................................................................................................................11

Recording............................................................................................................................................11

Deleting les from the USB Device......................................................................................................12

Care and Maintenance.................................................................................................................................12

Tone Arm Adjustment.................................................................................................................................15

ElectrohomeWarranty ................................................................................................................................16

WHAT’S INCLUDED

• Retro Music Player

• Remote Control

• 3ft 3.5mm Auxiliary Cable

• 45 Adapter

• Instruction Manual

• 1YearWarranty

• Lifetime Customer Support

TABLE OF CONTENTS

- 5 -

MAIN UNIT

CONTROL PANEL

BUTTONS AND CONNECTIONS

4 6 7 8

5 10

2318

161514 17 19

2625

2221

927

1. Phonograph Lid

Lift to reveal turntable

2. Phonograph Lid Support

Bracket

Lift and clip into place to

hold up lid

3. Speakers

Plays sounds from radio, cd,

or record

4. USB input

5. Volume Control

Control the volume of playback

6. Power ON/OFF button

7. Record Button

8. Function Button

9. LCD Display

10. Remote Control Sensor

11. Power Indicator

12. FM ST. Indicator

Indicates FM stereo is ON

13. AM Button

14. FM Button

15. CD/USB Button

16. AUX IN Button

Connect your MP3 player or

smartphone to play to music

17. Phono Button

18. FM Dial Scale

Indicates the FM channels

19. AM Dial Scale

Indicates the AM channels

20. CD Drawer

Holds the CD in the unit

21. Play/Pause Button

Plays/Pauses playback

22. Stop Button

Stops playback

23. DN/F-R Button

24. Tuning Control

Indicates which station is

being played

25. UP/F-F Button

26. PLAY-MODE Button

27. OP/CL Button

Opens and closes the CD tray

- 6 -

All of the buttons on the remote control have the same function as the buttons on the main unit.The

remote is used in CD/MP3 and USB mode.

28. Service Sticker

Access to adjusment screw

29. AUX IN Input

Connect your MP3 player or

smartphone to play to music

30. FM Antenna Wire

Improves FM reception

31. AC Power Cord

Plug AC power cord into any

wall outlet

32. Turntable

Place vinyl record here

33. 45 RPM Adapter

Place in centre of turntable to

accomodate 45 RPM records

34. Transit Screw

Tighten during transportation

35. Cue Lever

Raise or lower tone arm

36. Speed Selector

(33/45/78 RPM)

Select record play speed

37. Tone Arm Lock

Locks stylus arm

38. Tone Arm with Stylus

Plays records

39. Open/Close Button

Opens and closes the CD tray

40. Repeat Button

Repeat 1 or all songs on a CD

41. DB/FB (Skip Reverse)

Button

Skip back one track

42. Stop Button

Stops playback

43. Track - 10 Button

44. Random Button

Shue and play songs

randomly

45. Record Button

Record from CD, Album or MP3

to USB

46. Play/Pause Button

Plays/Pauses playback

47. UP/FF (Skip Forward)

Button

Skip to next track

48. Track +10 Button

49. Delete Button

50. Program Button

Program a set of songs

NOTE:All of the buttons on the

remote control have the

same function as the

buttons on the main unit.

BUTTONS AND CONNECTIONS

AUX IN

30 31

BACK OF UNIT

TURNTABLE

REMOTE

- 7 -

UNPACKING AND SETUP

• Carefully remove the unit from the display carton

and remove all packing material from the unit

• Unwind the AC power cord and extend it to its

full length

• Unwind the FM Antenna wire and extend it to its

full length

• Place the unit on a stable, level surface, close to

an AC outlet, out of direct sunlight, and away from

sources of excess heat, dust, moisture, humidity,

or strong magnetic elds

• Raise the lid to expose the phonograph.The

phonograph has been secured for shipment with a transit screw. Use a coin or screwdriver toTURNTHE

TRANSIT SCREW CLOCKWISE.This will allow the turntable to“oat”and turn freely.

• Remove the opaque white plastic stylus cover from the phonograph stylus by sliding it in the direction

of the arrow.

• Discard the stylus cover.

• Remove the twist-tie that was used to secure the tone

arm during shipment.

• Release the tone arm lock lever.

• Connect the plug to your AC outlet, as shown below.

PREPARATION FOR USE

POWER SOURCE

This system is designed to operate on normal 120V

60Hz AC only. Attempting to operate this system

from any other power source may cause damage to

the system, and such damage is not covered by

your warranty.

Note: This system is equipped with a polarized

AC power plug having one blade wider than the

other. This is a safety feature. If this plug does not

t into your existing AC outlet, do not try to defeat

this safety feature by altering the wide blade to

make it t into your outlet. If this plug will not t

into your outlet, you probably have an outdated

non-polarized AC outlet. Have the obsolete outlet

changed by a qualied licensed electrician.

BATTERY INSTALLATION OF REMOTE CONTROL

• The remote control requires one CR2025 (3V)

lithium battery.

• Hold level pressing the clasp with the

thumb in the right direction of the arrow

in the illustration, and take out the battery

compartment by sliding with forenger in

the direction to yourself. Take out the battery

compartment from the remote control.

Install a lithium battery (CR-2025) in the

compartment with the positive polarity

turned up. Hold level and push the battery

compartment into the remote control lightly.

It is okay once you hear a click.

Transit Screw

Tone Arm

Lock Lever

Stylus

Cover

- 8 -

TO AVOID DAMAGING THE CABINET ORTHE LID, NEVER FORCETHE LID CLOSED. ALWAYS RAISE THE LID

TO RELEASE THE LID SUPPORT BRACKET.

RAISING AND LOWERING THE LID IMPORTANT:

To open the lid, raise it as far as it will go until the lid support bracket‘locks’in the open position. To close the

lid, lift it upward slightly until the lid support bracket‘unlocks’, and then gently lower the lid.

PREPARATION FOR USE

OPERATION

AUX IN

POWERING ON THE UNIT

1. Press the POWER button on the front panel, and set the volume to a low level.The POWER indicator

lights up.

2. Press the FUNCTION selector buttons(AM/FM/CD/USB/AUX IN PHONO) to select your desired function.

3. Start to adjust the volume by using the VOLUME control.

4. When you have nished using the system, press the POWER button again to turn o the unit.The

POWER indicator will turn o.

AUX IN OPERATION

Listen to music via the AUX IN input by connecting your MP3 player or smartphone. Press the AUX IN

button to select AUX MODE. Insert the audio cable into the corresponding AUX IN Input at the back of your

system. Connect the other end of the cable to your device. Adjust the volume

using theVolume Control knob on the system’s control panel.

PROTECT YOUR FURNITURE

This model is equipped with non-skid rubber‘feet’to prevent the product from moving when you operate

the controls.These‘feet’are made from non-migrating rubber material specially formulated to avoid

leaving any marks or stains on your furniture. However, certain types of oil based furniture polishes, wood

preservatives, or cleaning sprays may cause the rubber‘feet’to soften, and leave marks or a rubber residue

on the furniture.To prevent any damage to your furniture we strongly recommend that you purchase small

self-adhesive felt pads, available at hardware stores and home improvement centers everywhere, and

apply these pads to the bottom of the rubber‘feet’before you place the product on ne wooden furniture.

- 9 -

OPERATION

INSERTING AND PLAYING A CD

1. Press the POWER button on the front panel to turn the system ON, set the

volume to a low level. Press the CD/USB button.

2. Press the OP/CL button to open the CD drawer. Place a CD in the tray, with

the printed label facing up. Press the OP/CL button again to close the CD

drawer.

3. The disc will spin for a few seconds while the player is reading the disc

and the total track number will appear in the display.The unit will start

playing the rst track of the disc. Adjust theVOLUME control to set the

volume as desired.

4. To skip forward or backward through the tracks on the disc, press the

UP/F.F or DN/F.R buttons.

5. Press the PLAY/PAUSE button to pause playback.The PLAY/PAUSE indicator

will blink in the display. Press again to resume playback. When the disc is

through playing, it will stop rotating.

6. To stop playback entirely, press the STOP button.

USB OPERATION

7. Press the CD/USB button rst and the FUNCTION button second to enter

USB mode, the "- - -" and USB icon will appear on the LED screen.

8. Insert a USB device into the USB input.The player will begin to play the

rst song of the USB.

9. The MP3 icon will be shown while MP3 is detected.

10. The PLAY/PAUSE, DN/F.R/UP/F.F and STOP functions are the same as in CD play mode.

You may press the FUNCTION button on the unit or the PLAY/PAUSE button on the remote control to

change the playing mode between CD and USB.

- 10 -

REMOVING THE USB DRIVE

Make sure to stop the playback and turn the unit o before removing the USB drive to avoid damage to the

USB and the system.

PLAYING IN MP3 MODEUNDER CD/USB OPERATION

1. Press PLAY/PAUSE button to start or pause playback of the selected track in

the CD/USB mode.

2. While playing the song, the song number and folder number of your

selected track will be shown on the screen.The MP3 icon and ►icon will

be shown.

3. You can stop the playback at any time by pressing the STOP button.

TRACK SKIP AND HIGH SPEED TRACK SEARCH IN CD/USB MODE

During CD/USB playback, pressing the UP/F.F (Fast Forward) or the DN/F.R (Fast

Reverse) button repeatedly will skip to higher or lower tracks. Release the button

when the desired track number is shown.The disc will begin to play from your

selected track.

Press the DN/F.R or the UP/F.F button to select a track from a folder. Both "ALBUM" and "001", "002"

(folder name and song name) will ash. Press the PLAY.MODE four times or press the RANDOM button on

the remote control and you will see RANDOM on the LED screen. Press the DN/F.R or the UP/F.F button to

manually select tracks randomly.

OPERATION

Folders are only available when a USB is detected, not during CD playback.

You can store a total of 99 MP3 tracks and 20 CD tracks.

OPERATION

MEMORY FUNCTION IN CD/MP3 MODE

1. Press STOP then press PLAY.MODE on the unit or PROGRAM on the

remote control to program your tracks. Both "PROG" (ashing) and

"P01" will appear on the screen. Press the UP/F.F or DN/F.R button to

select your track then press the PLAY.MODE or PROGRAM button to

conrm your selection.

2. Press the PLAY.MODE or PROGRAM button to program the next track.

Repeat for all of your selected tracks.

3. To set the memory while in MP3 mode (CD/USB), repeat steps 1 and 2.

4. Press the PLAY/PAUSE button to play the stored tracks, press UP/F.F or DN/F.B to select a track in the

sequence saved.

5. Press the STOP button twice to exit the program mode.This will clear the memory of your previous

selections.

Andere Handbücher für EANOS700

Inhaltsverzeichnis

Andere Electrohome Medienkonverter Handbücher

Electrohome

Electrohome EANOS700 Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung