Electrolux EPF09V1K8 Bedienungsanleitung

User Manual

Manuale dell'utente

Instrukcja obsługi

EPF09V1K8

EPF12V1K8

EPF18V1K8

2 www.electrolux.com

1. SAFETY INSTRUCTIONS.................................................................................. 3

2. INDOOR UNIT PARTS AND MAJOR FUNCTIONS........................................... 5

3. MANUAL OPERATIONS.................................................................................. 16

4. CARE AND MAINTENANCE............................................................................ 17

5. TROUBLESHOOTING ..................................................................................... 19

6. EUROPEAN DISPOSAL GUIDELINES............................................................ 23

CONTENTS

WE’RE THINKING OF YOU

Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings

with it decades of professional experience and innovation. Ingenious and stylish, it

has been designed with you in mind. So whenever you use it, you can be safe in the

knowledge that you’ll get great results every time. Welcome to Electrolux.

Visit our website to:

Get usage advice, brochures, trouble shooter, service information:

www.electrolux.com

www.electrolux.com/productregistration

Buy Accessories, Consumables and Original spare parts for your appliance:

www.electrolux.com/shop

CUSTOMER CARE AND SERVICE

We recommend the use of original spare parts.

When contacting Service, ensure that you have the following data available.

The information can be found on the rating plate. Model, PNC, Serial Number

Warning / Caution-Safety information.

General information and tips.

Environmental information.

Subject to change without notice.

ENGLISH

1. SAFETY INSTRUCTIONS

Before the installation and use of the

appliance, carefully read the supplied

instructions. The manufacturer is not

responsible if an incorrect installation

and use causes injuries and damages.

Always keep the instructions with the

appliance for future reference.

1.1 Children and vulnerable

people safety

WARNING!

Risk of su󰘯ocation, injury

or permanent disability.

• This appliance can be used by

children aged from 8 years and above

and persons with reduced physical,

sensory or mental capabilities or

lack of experience and knowledge

if they have been given supervision

or instruction concerning use of

the appliance in a safe way and

understand the hazards involved.

• Children shall not play with the

appliance.

• Cleaning and user maintenance

shall not be made by children without

supervision.

1.2 Installation and Use

WARNING!

Risk of su󰘯ocation, injury

or permanent disability.

• Contact an authorised installer for

installation of this unit.

• Contact an authorised service

technician for repair or maintenance

of this unit.

• The socket outlet required to

supply power must be connected

and commissioned by a licenced

contractor.

• If the supply cord is damaged, it must

be replaced by the manufacturer, its

service agent or similarly quali󰘰ed

persons in order to avoid a hazard.

• Installation work must be performed

in accordance with the national wiring

standards and the electricity suppliers

service rules by authorised personnel

only.

• If the unit is to be moved to another

location or disposed of, only a suitably

quali󰘰ed person is permitted to

undertake such work.

• If you notice an unusal situation, such

as a burning smell, please switch o󰘯

the power to the air conditioner and

contact an Electrolux service agent. If

this abnormal status continues the air

conditioner may be damaged or even

cause electric shock or 󰘰re.

• Do not operate the air conditioner with

wet hands. This may cause electric

shock.

• Do not damage or cut o󰘯 the power

cord or other wires. If this occurs,

please have it repaired or replaced by

an accredited technician.

• Do not connect this air conditioner to a

multi outlet power board.

• Please switch o󰘯 the power supply to

the air conditioner if it is not to be used

for an extended period. Otherwise, it

will accumulate dust and may cause

a 󰘰re.

• Before cleaning the air conditioner,

please disconnect the power supply

in order to eliminate the possibility of

electric shock.

• The power supply should be

matched with the air conditioner. Air

conditioners provided with a supply

cord should be connected directly to

a power outlet with a suitable safety

switch. Air conditioners that are hard

wired must be connected to a suitable

safety circuit breaker.

• Please ensure that the power supply

to the air conditioner is stable and

meets the requirements set out in the

installation manual.

• Always ensure the product is installed

with appropriate earthing.

• For safety, be sure to turn o󰘯 the

circuit breaker before performing any

maintenance or cleaning or when the

product is not used for an extended

4 www.electrolux.com

You can also get this manual through your local distributor or by visiting our website.

Please 󰘰nd the Electrolux web addresses to your local country from below table.

Country Website address Country Website address

Albania www.electrolux.al Netherlands www.electrolux.nl

Austria www.electrolux.at Norway www.electrolux.no

Belgium www.electrolux.be Poland www.electrolux.pl

Bulgaria www.electrolux.bg Portugal www.electrolux.pt

Croatia www.electrolux.hr Romania www.electrolux.ro

Czech Republik www.electrolux.cz Serbia www.electrolux.rs

Denmark www.electrolux.dk Slovakia www.electrolux.sk

Finland www.electrolux.󰘰 Slovenia www.electrolux.sl

France www.electrolux.fr Spain www.electrolux.es

Germany www.electrolux.de Sweden www.electrolux.se

Greece www.electrolux.gr Switzerland www.electrolux.ch

Hungary www.electrolux.hu Turkey www.electrolux.com.tr

Italy www.electrolux.it UK & Ireland www.electrolux.co.uk

Luxembourg www.electrolux.lu

Please visit www.electrolux.com for more information

period of time. Accumulated dust may

cause 󰘰re or electric shock.

• Select the most appropriate

temperature. It can save electricity.

• Do not keep windows and doors open

for a long time during operation. It will

result in insuf󰘰cient performance.

• Do not block the air inlet or outlet. It

will result in insuf󰘰cient performance

and cause malfunctions.

• Keep combustible materials away from

the units at least 1meter. It may cause

󰘰re.

• Do not step on the top of the outdoor

unit or place heavy things on it. It may

cause damage or injury.

• Do not attempt to repair the air

conditioner by yourself. Incorrect

repairs may cause electric shock

or 󰘰re. Please contact your local

authorised service centre.

• Do not insert your hands or objects

into the air inlet or outlet. It may cause

injury.

• Do not expose animals or plants

directly to the air󰘱ow.

• Do not use the unit for any other

purpose, such as preserving food or

drying clothes.

• Do not splash water on the air

conditioner. It may cause electric

shock or malfunction.

ENGLISH

2.1 Unit Parts

2.2 Operating Conditions

Use the system under the following temperatures for safe and e󰘯ective operation. If

the air conditioner is used under di󰘯erent conditions, it may malfunction or become

less e󰘲cient.

2. INDOOR UNIT PARTS AND MAJOR FUNCTIONS

Display panel

Air outlet

Louver

Air inlet

COOL Mode HEAT mode DRY mode

Indoor

Temperature

17-32°C

(62-90°F) 0-30°C

(32-86°F) 17-32°C

(62-90°F)

Outdoor

Temperature

0-50°C

(32-122°F)

-15-24°C

(5-76°F) 0-50°C

(32-122°F)

-15-50°C

(5-122°F)

(low temperature

cooling models)

Fig 2.1

6 www.electrolux.com

2.3 Features

Default Setting

When the air conditioner restarts after a

power failure, it will default to the factory

settings (AUTO mode, AUTO fan, 24°C

(76°F)). This may cause inconsistencies

on the remote control and unit panel. Use

your remote control to update the status.

Auto-Restart (some models)

In case of power failure, the system will

immediately stop. When power returns,

the Operation light on the indoor unit will

󰘱ash. To restart the unit, press the ON/

OFF button on the remote control. If the

system has an auto restart function, the

unit will restart using the same settings.

Louver Angle Memory Function

(Optional)

Some models are designed with a louver

angle memory function. When the unit

restarts after a power failure, the angle of

the horizontal louvers will automatically

return to the previous position. The angle

of the horizontal louver should not be

set too small as condensation may form

and drip into the machine. To reset the

louver, press the manual button, which

will reset the horizontal louver settings.

Refrigerant Leak Detection

System (some models)

In the event of a refrigerant leak, the LCD

screen will display “EC” and the LED

indicator light will 󰘱ash.

2.4 Energy Saving Tips

• DO NOT set the unit to excessive

temperature levels.

• While cooling, close the curtains to

avoid direct sunlight.

• Doors and windows should be kept

closed to keep cool or warm air in the

room.

• DO NOT place objects near the air

inlet and outlet of the unit. This will

reduce the e󰘲ciency of the unit.

• Set a timer and use the built-in SLEEP/

ECONOMY mode if applicable.

• If you don’t plan to use the unit for a

long time, remove the batteries from

the remote control.

• Clean the air 󰘰lter every two weeks.

A dirty 󰘰lter can reduce cooling or

heating e󰘲ciency.

• Adjust louvers properly and avoid

direct air󰘱ow.

Closing curtains during heating also

helps keep the heat in

Doors and windows should be

kept closed

ENGLISH

2.5 Handling the remote

controller

TEMP

AUTO

COOL

DRY

HEAT

FAN

HIGH

MED

LOW

MODE

FAN SPEED

TIMER ON

SLEEP

ON/OFF

PLASMA TIMER OFF

AIR

DIRECTION

RESET LOCK

SET TEMPERATURE(ć)

SENSOR

LED

DISPLAY

TURBO

VENT

Location of the remote

controller.

• Keep the remote controller where

its signals can reach the receiver of

the indoor unit. (a distance of 8m is

allowed).

CAUTIONS

• The air conditioner will not

operate if curtains, doors or

other materials block the signals

from the remote controller to the

indoor unit.

• Prevent any liquid from falling

into the remote controller. Do

not expose the remote controller

to direct sunlight or heat.

• If the infrared signal receiver

on the indoor unit is exposed

to direct sunlight, the air

conditioner may not function

properly. Use curtains to prevent

the sunlight from falling on the

receiver.

• If other electrical appliances

react to the remote controller.

either move these appliances

or consult your local dealer.

2.6 Replacing batteries

The remote controller uses two alkaline

dry batteries (R03/LR03X2)

1. Slide the cover of the battery

compartment o󰘯 according to the

arrow direction, then replace the old

batteries with new ones.

2. Insert the new batteries making sure

that the(+) and (-) of battery are

installed correctly.

3. Reattach the cover by sliding it back

into position.

NOTE: Do not use old batteries or

di󰘯erent type batteries or rechargeable

batteries, otherwise it may cause the

remote controller malfunction.

2.7 Remote Controller

Speci󰘰cation

Model R51I4/BGE, R51I4/

BGCE, R51I19/

BGE, R51I19/

BGCE RG51I47/

BG(C)E

Rated Voltage 3.0V(Dry batteries

R03/LR03×2)

Signal Receiving

Range

Environment -5°C~60°C

8 www.electrolux.com

2.8 Performance Features

1. Operating Mode: COOL,

HEAT(Cooling only model without),

DRY, FAN and AUTO.

2. Timer Setting Function in 24 hours.

3. Indoor Setting Temperature Range:

17°C~30°C.

4. Full function of LCD (Liquid Crystal

Display)

2.9 Features of Remote

controller buttons



$'-867

$872

&22/

'5<

+($7

)$1

+,*+

0('

/2:

02'(

)$163(('

',5(&7,21

6:,1*

7,0(521

6/((3

212))

7,0(52))

5(6(7/2&.

6(77(03(5$785(r&

2SWLRQDOEXWWRQ

&/($1

$,5

785%2































6(/)

&/($1

)2//2:

0( /('

',63/$<

1TEMP Button : Push this button

to increase the indoor temperature

setting in 1°C increments to 30°C.

2ON/OFF Button: Press this button to

start the indoor unit. Press again to

stop the unit.

3FAN SPEED Button: Press the

button to select the Fan speed in

the sequence: AUTO, LOW, MED

and HIGH. Each time the button is

pressed, the fan speed selection is

shifted.

4TIMER ON Button: Press this button

to activate the Auto-on time setting.

Each press will increase the time

setting in 30 minutes increments

if the setting time is lower than 10

hours. When the setting time reaches

10h, each press will increase the

time setting 1 hour in increments. To

cancel the Auto-on time setting, just

press the button until the time setting

is 0.0.

5SLEEP Button: Active/Disable sleep

function. It can maintain the most

comfortable temperature and save

energy. For the detail, see “sleep

operation” in “USER S MANUAL”.

NOTE: While the unit is running under

SLEEP mode, it would be cancelled if

ON/OFF, FAN SPEED, SLEEP or MODE

button is pressed.

6TIMER OFF Button: Press this

button to activate the Auto-o󰘯 time

setting. Each press will increase the

time setting in 30 minutes increments

if the setting time is lower than 10

hours. When the setting time reaches

10h, each press will increase the

time setting 1 hour in increments. To

cancel the Auto-o󰘯 time setting, just

press the button until the time setting

is 0.0.

7LOCK Button: Press this recessed

button to lock all current settings, and

the remote controller will not accept

any operation except that of the

LOCK. Use the LOCK mode when

you want to prevent settings from

being changed accidentally. Press

the LOCK button again to cancel

the LOCK function. A lock symbol

will appear on the remote controller

display when the lock function is

activated.

8TURBO Button: Push this button to

activate the Turbo function. Turbo

function enables the unit to reach

the preset temperature at cooling

or heating operation in the shortest

time(if the indoor unit does not

support this function, there is no

corresponding operation happened

when pressing this button.)

ENGLISH

9LED DISPLAY Button: Press this

button to clear the display on the

indoor unit, press it again to light the

display.

10 RESET Button: Once the recessed

RESET button is pressed, all of the

current settings will be cancelled and

the controller will return to the initial

settings.

11 FOLLOW ME Button(on some

models): Push this button to initiate

the Follow Me feature, the remote

display is actual temperature at its

location. The remote control will

send this signal to the air conditioner

every 3 minutes interval until press

the Follow Me button again. The air

conditioner will beep to indicate the

Follow Me feature has ended if it

does not receive the signal during

any 7 minute interval.

12 SELF CLEAN(AUTO CLEAN)

Button: Press this button under

COOL or DRY mode, the self clean

function is activated. Under SELF

CLEAN mode, the air conditioner

will automatically clean and dry the

Evaporator and keep it as fresh for

the next operation.

13 CLEAN AIR Button(on some

models): When push this

button, the Ionizer/Plasma Dust

Collector(depending on models) is

energized and will help to remove

pollen and impurities from the air.

14 DIRECTION/SWING Button: Used

to stop or start horizontal louver

movement or set the desired up/

down air 󰘱ow direction. The louver

changes 6 degree in angle for each

press. If keep pushing more than 2

seconds, the louver will swing up and

down automatically.

15 MODE Button: Each time the button

is pressed, the operation mode is

selected in the sequence of the

following:

AUTO

COOL

DRY

HEAT FAN

NOTE: Please do not select HEAT mode

if the machine you purchased is cooling

only type. Heat mode is not supported by

the cooling only appliance.

16 TEMP Button : Push this button

to increase the indoor temperature

setting in 1°C increments to 17°C.

Note:

• Buttons design might be slightly

di󰘯erent from the actual one you

purchased depending on individual

models.

• All the functions described are

accomplished by the indoor unit. If the

indoor unit has no this feature, there is

no corresponding operation happened

when press the relative button on the

remote controller.

10 www.electrolux.com

2.10 Indicators on display panel

Mode display

Displays the current selected mode.

Including AUTO, COOL, DRY, HEAT

(cooling & heating models only) and

FAN.

Transmission Indicator

This transmission indicator will light when

remote controller transmits signals to the

indoor unit.

Temp./Timer display

The temperature setting (from 17°C to

30°C) or timer setting (0~24h) will be

displayed. If FAN mode is selected, there

will be no display.

ON/OFF display

This indicator will be displayed when the

unit is operating.

Mode display (FAN mode)

Fan speed display

Displays the selected fan speed:

AUTO, HIGH, MED and LOW.

Nothing displays when the fan speed is

selected in AUTO speed. When AUTO or

DRY Mode is selected, there will be no

signals displayed.

FOLLOW ME display

When pressing FOLLOW ME button

in COOL or HEAT mode, the remote

sensing function is activated and this

indicator displays.

TIMER display

This display area shows the settings of

the TIMER. That is, if only the Auto-on

time function is set, it will display TIMER

ON. If only the Auto-o󰘯 time function is

set, it will display TIMER OFF. If both

functions are set, it will display TIMER

ON OFF which indicates you have

chosen both the Auto-on time and Auto-

o󰘯 time.

LOCK Indicator

LOCK display is displayed when pushing

the LOCK button. Push the LOCK button

to clear display.

SET TEMPERATURE

TIMER ON OFF

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Electrolux Klimaanlage Handbücher

Electrolux

Electrolux EASE09P5AHLW Bedienungsanleitung

Electrolux

Electrolux CAL61.206 Handbuch

Electrolux

Electrolux EXI09HD1W Bedienungsanleitung

Electrolux

Electrolux EASC12F2MBKLW Bedienungsanleitung

Electrolux

Electrolux BCCHS-7I Bedienungsanleitung

Electrolux

Electrolux ESV093C3XA Bedienungsanleitung

Electrolux

Electrolux EXP09HSECI Bedienungsanleitung

Electrolux

Electrolux Air Conditioner Bedienungsanleitung

Electrolux

Electrolux Frigidaire FHWW253WC2 Betriebsanleitung

Electrolux

Electrolux ERS09E37HW Bedienungsanleitung

Electrolux

Electrolux ESV09CRS-B2 Bedienungsanleitung

Electrolux

Electrolux FAC124P1A Bedienungsanleitung

Electrolux

Electrolux EACS/I-HAV/N8_22Y EEC Bedienungsanleitung

Electrolux

Electrolux EPE 800 Bedienungsanleitung

Electrolux

Electrolux FAS156N1 Bedienungsanleitung

Electrolux

Electrolux EXI09HJIW Bedienungsanleitung

Electrolux

Electrolux EPV09CRA Bedienungsanleitung

Electrolux

Electrolux EL-KFR26G/TN2Y-A Betriebsanleitung

Electrolux

Electrolux EXS09JEIW Bedienungsanleitung

Electrolux

Electrolux EXI09HD1W Bedienungsanleitung

Electrolux

Electrolux ERS09E37HW Service-Handbuch

Electrolux

Electrolux EACM-09 HR/N6 Bedienungsanleitung

Electrolux

Electrolux ESD24HRA Bedienungsanleitung

Electrolux

Electrolux CXl09HL1W Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung