Elite Screens CineGrey 5D Leitfaden

Rev. 072318-BR 1www.elitescreens.com

Elite Screens wants you to enjoy your Designer Cut Projection Screen to its full extent and for many years to come! We

made the Designer Cut materials available for you to be able to fully customize your projection experience, however,

please note that ALL Designer Cut materials do require specific properties to be adhered during installation to obtain an

enjoyable viewing experience.

The CineGrey 5D® is the perfect solution for rooms that have little or no control over incidental light. This means that it’s

an ideal fit for family rooms as well as lecture halls, boardrooms, sports bars, training facilities, and other business

environments. In addition, the CineGrey 5D® increases projector brightness by 1.5 times.

Care & Use

Please follow this general rule of thumb for all Designer Cut screens

• Only Project onto the “Front” of material. The material will have a sticker to indicate the backside of the material.

• Stretch material taught over any frame/structure of your choice

• Never place your screen over a window or under consistent sun exposure

NOTE: Direct sunlight destroys projector screen materials. Solar radiation breaks down cloth and synthetic

projection materials, so it is best to keep them away from direct sunlight.

Installation Tips

• If you are using a staple or nail gun to stretch your material over a custom frame/structure you can reinforce

the puncture area with a duct tape strip to prevent tearing the material as its being stretched.

• For best picture quality results, maintain a minimum viewing distance if possible 1.5 times the width of your

projection image. NOTE: Sharp metal implements such as thumb tacks or nails will cause the material to tear

under its own weight when improperly applied.

Material Maintenance

Wrinkles/Creases: The material may have minor wrinkles which will get removed after stretching it tightly over a frame or

a mounting system that allows tensioning.

Dust/Dirt: A feather duster should be used to remove loose dirt or dust. Use mild soap and warm water on a microfiber

cloth to clean dirt or dust spots. Do not rub or scrape the material.

We take great care in packaging the Designer Cut series of materials so that they arrive at your doorstep with zero issues.

Should your screen arrive with any shipping damage or show signs of damage, we urge you to contact us directly so that

we can provide a speedy resolution – we always strive for the best customer experience and are here to help.

Scan QR Code or visit

www.elitescreens.com/videodesignercut

To Watch the Designer Cut Product Video

Note: The 135” size listed for this series is

referring to the diagonal measurement of the

screen material

Width

135”

Diagonal

Height

Designer Cut Series- CineGrey 5D®

Ambient Light Rejecting Projection Material

Rev. 072318-BR 2www.elitescreens.com

Addressing Indentations on the CineGrey 5D® Material

If you notice slight indentations on the material upon unpacking the

screen, there are a couple of things that can be done to alleviate

them. The easiest method would be to allow the material to rest.

These indentations should dissipate over time when the screen is

fully assembled and the material is completely tensioned.

To quicken the process, before mounting the screen, use a hairdry-

er set on medium heat and blow on the material from its back side

while slightly pulling on the edges to further tension the material.

Keep the hairdryer about a foot away at all times. Do not apply

excessive heat as this will cause the material to deform. You may

need to repeat this process for a couple of times depending on the

severity of the indentations.

NOTE: After applying heat, you must allow the screen to cool down completely before it shows any improvement

in alleviating the indentations.

Elite Screens Guarantees all of our Designer Cut Series screens to fully cover the advertized diagonal size and

aspect ratio (when thoroughly stretched over an/your existing frame), however, due to the nature of the polymers

in some materials; you may notice:

1. A slight difference in screen size when rolled out. This shrinkage is normal and it’s due to the materials temper-

ature adjustment while packed, stored and shipped. Please note that the Designer Cut Series of materials require a taut

stretching for optimal performance of up to 135" diagonal 16:9 DIY frame.

2. A minor line every 5" to 8" when rolled out. This is normal and is due to the edge of the material causing a

minor imprint when the material is being rolled for packing. Please note that the Designer Cut Series of materials require a

taut stretching for optimal performance of up to 135" diagonal 16:9 DIY frame this stretching should remove any minor

imprint from your final installation and should not affect your viewing experience.

If for any reason you receive a product that shows significant shrinkage (over 2"-3" difference) or deep crease lines that

do not alleviate with stretching please contact our dedicated service team for assessment and resolution.

[email protected] / 1-855-877-511-1211 ext 237,253, & 235

For Technical Support or an Elite Screens Contact in your area, visit

www.elitescreens.com or call 1.877.511.1211

Screen material when first

unpackaged and assembled

Screen material when

fully tensioned and cured

Rev. 072318-BR 3www.elitescreens.com

Notice to Installer:

Please use the following installation instructions to obtain superior optical performance from the CineGrey 5D®

Angular Reflective ALR (Ambient Light Rejecting) Screen.

• Angular-Reflective material is not compatible with ultra/short-throw projectors

• Minimum lens throw ratio 1.5x image width

• Ambient light must not come from the same direction as the projector

Since angular-reflective means that the projected image will reflect at the mirror-opposite angle, it is important to position

the projector so that the viewer will get the best possible image.

Step 1: Establish the general “eye level” of the viewers

Step 2: Set the appropriate projection level

Step 3: Adjust the screen height level and projection angle

Input Angle (A) = Output Angle (B) aligns with the viewer’s angle

Inhaltsverzeichnis

Andere Elite Screens Projektorzubehör Handbücher

Elite Screens

Elite Screens ZSP-TR01 Bedienungsanleitung

Elite Screens

Elite Screens Ceiling Trim Kit for Home2 Series Bedienungsanleitung

Elite Screens

Elite Screens CineTension2 Series Kurzanleitung

Elite Screens

Elite Screens Manual Series Bedienungsanleitung

Elite Screens

Elite Screens YARD MASTER MANUAL SERIES Bedienungsanleitung

Elite Screens

Elite Screens PicoScreen Series Bedienungsanleitung

Elite Screens

Elite Screens Osprey Tension Dual Series Bedienungsanleitung

Elite Screens

Elite Screens YARD MASTER MANUAL SERIES Bedienungsanleitung

Elite Screens

Elite Screens 3 Series Bedienungsanleitung

Elite Screens

Elite Screens ezFrame 2 Series Kurzanleitung

Elite Screens

Elite Screens Evanesce Tab Tension B CineGrey 5D Bedienungsanleitung

Elite Screens

Elite Screens EDGE FREE Aeon CineGrey 4D AT Series Bedienungsanleitung

Elite Screens

Elite Screens YARD MASTER MANUAL SERIES Bedienungsanleitung

Elite Screens

Elite Screens VMAX110UWH2 E24 Bedienungsanleitung

Elite Screens

Elite Screens Spectrum 2 Series Bedienungsanleitung

Elite Screens

Elite Screens Portable Mobile Stand Bedienungsanleitung

Elite Screens

Elite Screens Spectrum Tab-Tension 2 CineGrey 3D Series Bedienungsanleitung

Elite Screens

Elite Screens Lunette 2 Series Bedienungsanleitung

Elite Screens

Elite Screens SRM Pro Series Bedienungsanleitung

Elite Screens

Elite Screens Manual SRM Pro Gebrauchsanweisung

Elite Screens

Elite Screens Universal Mobile Stand Bedienungsanleitung

Elite Screens

Elite Screens Aeon CineWhite A8K Series Bedienungsanleitung

Elite Screens

Elite Screens Yard Master OMS125WHT-BAT-ELEC Bedienungsanleitung

Elite Screens

Elite Screens OMS125HLITE Bedienungsanleitung

Beliebte Projektorzubehör Handbücher anderer Marken

Optoma

Optoma BX-AL133B Bedienungsanleitung

PEERLESS

PEERLESS PE 1120 Leitfaden

Osram

Osram SIRIUS HRI Series Handbuch

Presentation Switchers

Presentation Switchers PS111 Bedienungsanleitung

Kramer

Kramer VIA GO Bedienungsanleitung

Yamaha

Yamaha PJL-112 Stücklistenhandbuch

Swedstyle

Swedstyle CL23AA02ZA25E Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 236CB Betriebsanleitung

Epson

Epson BrightLink 475Wi Bedienungsanleitung

Acer

Acer WP100 Bedienungsanleitung

i3 i3board Bedienungsanleitung

CHIEF

CHIEF HB-43E Bedienungsanleitung

Biamp

Biamp Modena Hub Service-Handbuch

NEC

NEC MP10RX Bedienungsanleitung

Panamorph

Panamorph DCR-S3 Bedienungsanleitung

Exact solutions

Exact solutions FRAME-EVO-P10 Bedienungsanleitung

CHIEF

CHIEF VCM103S Bedienungsanleitung

InFocus

InFocus LP70+ Leitfaden