Elmo PTC-400C Bedienungsanleitung

Please read this instruction manual carefully before using this PTC-400C

and keep it for future reference.

PAN • TILT • ZOOM COLOR CAMERA

PTC-400C

INSTRUCTION MANUAL

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus outdoors.

6. Do not use this apparatus near water.

7. Clean only with dry cloth.

8. Do not install near heat sources such as radiators, heat registers,

stoves or other apparatus (including amplifiers) that produce heat.

9. Do not touch this apparatus during lightning storms.

10.Unplug when unused for long periods of time.

11.Refer all servicing to qualified personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord

or plug is damaged, liquid has been spilled or objects have been fallen

onto the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

- 1 -

IMPORTANT SAFETY INSTRUCTIONS

WARNING:Handling the cord on this product or cords

associated with accessories sold with this

product, will expose you to lead, a chemical

known to the State of California to cause birth

defects or other reproductive harm.

Wash hands after handling.

- 2 -

CAUTION

•Do not use any power supply other

than specified.

WARNING

TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO RAIN

OR MOISTURE.

* The CAUTION label is attached on

the base of product.

INFORMATION

This equipment has been tested

and found to comply with the

limits for Class B digital device,

pursuant to Part 15 of the FCC

Rules. These limits are designed

to provide reasonable protection

against harmful interference

when the equipment is operated

in a commercial environment.

This equipment generates, use,

and can radiate radio frequency

energy and, if not installed and

used in accordance with the

instruction manual, may cause

harmful interference to radio

communications. Operation of

this equipment in a residential

area is likely to cause harmful

interference in which case the

user will be required to correct

the interference at his own

expense.

USER-INSTALLER

CAUTION: Your authority to

operate this FCC verified

equipment could be voided if you

make changes or modifications

not expressly approved by the

party responsible for compliance

to Part of the FCC Rules.

CAUTION

CAUTION : TO REDUCE THE RISK OF

ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

RISK OF ELECTRIC

SHOCK DO NOT OPEN

The lightning flash with arrowhead

symbol, within an equilateral

triangle, is intended to alert the

user to the presence of

uninsulated "dangerous voltage"

within the product's enclosure that

may be of sufficient magnitude to

constitute a risk of electric shock

to persons.

The exclamation point within an

equilateral triangle is intended to

alert the user to the presence of

important operating and

maintenance (servicing)

instructions in the literature

accompanying the appliance.

This Camera has no power switch. When checking and maintaining this

Camera, be sure to turn OFF the power supply to the main unit

beforehand.

This Camera is designed only for use indoors. Do not use this Camera

out of doors.

Do not leave the Camera under direct sunlight or by heater, or the

Camera may be discolored, or damaged.

Do not place the Camera in any humid, dusty, windy or vibrating

location. Use the Camera in the following environmental condition:

Temperature: -10 °C ~ 40 °C (14 °~ 104 °F)

Humidity: 30% ~ 90% (No condensation)

Use a soft, dry cloth for cleaning. Do not use any volatile solvent, such

as thinner or benzin.

Do not directly point the camera lens into the sun, or the camera may be

damaged.

Caring for the batteries:

•If the Camera is not used for long time, take out the batteries from the

case.

•Do not use rechargeable Ni-Cd batteries.

•Do not use new and old batteries, or batteries of different type

together.

•Do not try to recharge or short-circuit the batteries.

This Camera is designed only for installation to the ceiling.

When installing this Camera, use only the dedicated fixing plate, refer to

the pages 9 to 13 of this manual, and carefully check the safety, such as

falling prevention.

- 3 -

HANDLING PRECAUTIONS

- 4 -

CONTENTS

IMPORTANT SAFETY INSTRUCTIONS .........................................1

HANDLING PRECAUTIONS ............................................................3

1. PART NAMES AND FUNCTIONS....................................................5

2. WIRELESS REMOTE CONTROLLER .............................................7

3. SETTING UP ....................................................................................9

4. OPERATION PROCEDURES ........................................................14

[1] Power supply to the Camera .....................................................14

[2] Turning ON/OFF of the Camera power .....................................14

[3] Operating PAN/TILT ..................................................................15

[4] Lens operation...........................................................................15

[5] Preset operation ........................................................................17

[6] External unit control...................................................................18

5. THE ID NUMBER (REMOTE ID) SETTING ...................................19

6. SETTING IN THE OSD (ON-SCREEN DISPLAY) MENU..............20

7. SETTING OF ALARM IN-OUT .......................................................28

[1] Alarm input ................................................................................28

[2] Alarm output ..............................................................................28

8. SETTING OF RS-485.....................................................................29

[1] Setting the terminating resistance .............................................29

[2] Setting the ID address ...............................................................29

9. SETTING OF VARIOUS MODES...................................................30

[1] Initializing the settings ...............................................................30

10. TROUBLESHOOTING HINTS........................................................31

11. SPECIFICATIONS..........................................................................33

12 SUPPLIED ACCESSORIES...........................................................35

13 OPTIONS .......................................................................................36

Main unit

- 5 -

1. PART NAMES AND FUNCTIONS

LED

BASE

ORNAMENTAL RING

CAMERA HEAD

INFRARED

SENSOR

LENS

VIDEO OUT TERMINAL

(BNC jack)

DC IN

COMPOSITE CABLE

ALARM IN-OUT TERMINAL (6P connector (Black))

RS-485 TERMINAL (5P connector (White))

- 6 -

Wireless Remote Controller

Button Name Function Ref. Page

FOCUS

ZOOM

POWER To turn ON/OFF the Camera power. P.14

PRESET To register the preset position. P.17

ID To set the ID No. when multiple Cameras are used. P.19

NUMBER To set the preset position and the ID No. P.17

RESET To readjust the position of the Camera head. P.15

AUX Alarm signal is outputted from ALARM OUT terminal (2). Prior P.18

setting of the OSD mode is required.

NORMAL

To return the iris to the factory setting automatically. P.16

IRIS OPEN To open the iris. P.16

CLOSE To close the iris. P.16

AUTO To adjust the focal point automatically to maintain it in the P.16

“in focus”status.

NEAR To move the focal point near. P.16

FAR To move the focal point far. P.16

TELE To zoom in (TELE) the image. P.15

WIDE To zoom in (WIDE) the image. P.15

DIRECTIONS To change the Camera head direction by operating the P.15, 20

cursor on the OSD.

HOME To move the Camera head direction by operating P.15, 20

the cursor on the OSD.

MENU To turn ON/OFF the OSD display. In the hierarchical menu, P.19, 20

the screen immediately before appears.

CURSOR PAN/TILT

To suspend the menu operation. P.20

PRESET

NUMBER

NORMAL

CURSOR

PAN/TILT

AUTO

TELE

2POWER

RESET

OPEN

AUX

FAR

NEAR

DIRECTIONS

HOME

WIDE

Note: The “”button is not used for normal operation.

- 7 -

Point the infrared emitter of the wireless remote controller to the infrared sensor located on

the front of the Camera main unit, and press the button of the intended operation.

For the receivable renge, refer to the below figures.

Receivable range

Distance : Within approx. 7m from the infrared sensor front

Angle : Within approx. 60° right and left, approx. 10° above

and approx 30° below from the infrared sensor front

2. WIRELESS REMOTE CONTROLLER

Note: The infrared sensors may receive the infrared rays only within a

narrower receivable range or may not receive them at all depending

on the ambient environment, such as being placed under the sunlight

or near an inverter fluorescent lamp. In such case, relocate the

installation place of the receiving side or block off the sunlight.

7m 7m

10°

30°60°

60°

Side view Bottom view

Precaution for the battery

Remove the battery case cover by pressing downward on the [ ] mark part in the

direction as indicated by the arrow.

Install 2 pcs. of batteries (type R03,AAA) into the case in the direction as indicated

there.

Note: Install the batteries with the proper to and to polarity.

Note: For dry cells, be sure to use the size AAA.

Note: Change the batteries at least once a year or when even nesessary.

- 8 -

Note: The supplied batteries supplied with the Camera are only for use in

initially confirming the operation of the Camera.

It is not guaranteed that these batteries will work effectively for the

indicated period.

When multiple Cameras are operated through the wireless remote

controller

Refer to "5. THE ID NUMBER SETTING" on P. 19.

- 9 -

3. SETTING UP

Note: When carrying the Camera, be sure to hold the base.

Note: Do not turn the Camera head in the PAN-TILT direction by hand, or

the Camera head could be broken.

WARNING:The total mass of the main unit and fixing plate is approx. 900g. Check

whether the ceiling to which the Camera is installed is strong enough to

hold the total mass of the main unit and fixing plate.

If not, the Camera could fall, causing injury.

(1) Mounting the Fixing Plate

1.Make mounting holes and a cord hole in the place (ceiling) to which this Camera is

installed.

[1] Installation

85.7mm(3-3/8inch)

ø72 (cord hole)

MOUNTING HOLE (prepared hole)

for FIXING PLATE, 4 locations

FRONT

FIXING SCREW M4 × 40 (supplied),

4PCS

CELING PLATE (supplied)

FIXING PLATE

(supplied)

2.Lock the fixing plate (supplied) firmly with 4 fixing screws (not supplied).

Andere Handbücher für PTC-400C

Inhaltsverzeichnis

Andere Elmo Sicherheitskamera Handbücher

Elmo

Elmo Dome Camera TND4104X Bedienungsanleitung

Elmo

Elmo HC7501 Bedienungsanleitung

Elmo

Elmo PTC-401CIP Bedienungsanleitung

Elmo

Elmo QSN301D Betriebsanleitung

Elmo

Elmo ESD-300DR Bedienungsanleitung

Elmo

Elmo Vandal Resistant Dome Camera TND4204VX Bedienungsanleitung

Elmo

Elmo HC7501 Bedienungsanleitung

Elmo

Elmo PTC-100S Bedienungsanleitung

Elmo

Elmo PTC-200C Bedienungsanleitung

Elmo

Elmo TSE400 Bedienungsanleitung

Elmo

Elmo CCD Color Video Camera TSN410H Bedienungsanleitung

Elmo

Elmo Dome Camera TND4004 Bedienungsanleitung

Elmo

Elmo HC7001 Bedienungsanleitung

Elmo

Elmo CCD Color Video Camera TNC4604 Bedienungsanleitung

Elmo

Elmo SE420 Bedienungsanleitung

Elmo

Elmo PTC-100S Bedienungsanleitung

Elmo

Elmo TSN280D Bedienungsanleitung

Elmo

Elmo TD4114IP II Bedienungsanleitung

Elmo

Elmo Dome Camera TND4104X Bedienungsanleitung

Elmo

Elmo TSE270X Bedienungsanleitung

Elmo

Elmo One-Piece Color Video Micro Camera MN30 Bedienungsanleitung

Elmo

Elmo X Line TND4003X Bedienungsanleitung

Elmo

Elmo Dome Camera TND4004 Bedienungsanleitung

Elmo

Elmo TNC4604 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung