Elo TouchSystems ET1502L Bedienungsanleitung

USER MANUAL

Elo Touch Solutions

ET1002L, ET1302L, ET1502L

UM600243 Rev F

User Manual ET1002L, ET1302L, ET1502L

No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or

by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permission of Elo Touch Solutions, Inc.

Disclaimer

The information in this document is subject to change without notice. Elo Touch Solutions, Inc. and its Affiliates (collectively “Elo”) make no representations or warranties

with respect to the contents herein, and specifically disclaim any implied warranties of merchantability or fitness for a particular purpose. Elo reserves the right to revise

this publication and to make changes from time to time in the content hereof without obligation of Elo to notify any person of such revisions or changes.

Trademark Acknowledgments

Elo, Elo (logo), Elo Touch, Elo Touch Solutions and TouchPro are trademarks of Elo and its Affiliates. Windows is a trademark of MicrosoftCorporation.

User Manual ET1002L, ET1302L, ET1502L

Table of Contents

Section 1: Introduction ............................................................................................................................................................................................................................... 4

Section 2: Installation................................................................................................................................................................................................................................. 5

Section 3: Mounting ................................................................................................................................................................................................................................. 10

Section 4: Operation ................................................................................................................................................................................................................................ 16

Section 5: Technical Support................................................................................................................................................................................................................... 22

Section 6: Safety & Maintenance............................................................................................................................................................................................................. 24

Section 7: Regulatory Information............................................................................................................................................................................................................ 25

Section 8: Warranty Information............................................................................................................................................................................................................... 33

User Manual ET1002L, ET1302L, ET1502L

Section 1: Introduction

Product Description

Your new touch monitor combines the latest developments in touch technology and display design with reliability for use in high-traffic environments.

This touch monitor incorporates a 24-bit color, active matrix thin-film-transistor LCD panel to provide high-quality display performance. ET1002L supports

HD 1280 x 800. ET1302L, ET1502L supports full HD 1920 x 1080. Its LED backlight significantly reduces power consumption and eliminates the need for

mercury (compared to CCFL-backlit panels). Other features that enhance this LCD monitor’s performance are USB Type-C (display, touch and video),

Plug & Play compatibility, remote on-screen display (OSD) controls and flexible mounting options.

Part Number

Part Description

Touch Technology

Surface Treatment

Touch Interface

Color

E155834

ET1002L-2UWC-1-G

PCAP

Anti-glare

USB

Black

E324341

ET1002L-0NWC-1-ZB-GY-G

No Touch

Anti-glare

USB

Black

E683204

ET1302L-2UWA-1-BL-G

PCAP

Anti-glare

USB

Black

E683595

ET1302L-2UWA-1-BL-NS-G

PCAP

Anti-glare

USB

Black

E683396

ET1302L-2UWA-1-WH-G

PCAP

Anti-glare

USB

White

E683787

ET1302L-2UWA-1-WH-NS-G

PCAP

Anti-glare

USB

White

E155645

ET1502L-2UWC-1-G

PCAP

Anti-glare

USB

Black

E125496

ET1502L-2UWC-1-NS-G

PCAP

Anti-glare

USB

Black

Precautions

Follow all warnings, precautions and maintenance as recommended in this user manual to maximize the life of your unit and prevent risks to user safety.

See the Safety & Maintenance Section for more information.

This manual contains information that is important for the proper setup and maintenance of the unit. Before setting up and powering on your new touch

monitor, read through this manual, especially the Installation, Mounting, and Operation Sections.

User Manual ET1002L, ET1302L, ET1502L

Section 2: Installation

Unpacking the Touch Monitor

Open the carton and verify that the following items are present:

•

ET1002L Touch monitor with touch: E155834 (or without touch: E324341)

•

ET1302L Touch monitor with stand: E683204, E683396 (or without stand: E683595, E683787)

•

ET1502L Touch monitor with stand: E155645 (or without stand: E125496)

•

Quick Install Guide

•

HDMI cable

•

Touch USB Cable (USB Type-A to Type-C) (Not for E138394)

•

Power brick

•

Europe power cord

•

North America power cord

•

EEI Label

•

ET1302L: 3 x tie wraps, 2 x cable cover screws

•

ET1002L, ET1502L: 2 x cable clamps, 2 x tie wraps, 3 x screws (M3x8mm) for cable clamps, 2 x screws (M3x10mm) for cable doors

User Manual ET1002L, ET1302L, ET1502L

ET1502L stand version

The stand of the touchmonitor can be converted between two positions: the low profile “hostess” position and the high profile “upright” position.

The touchmonitor ships in the low profile “hostess” position. (ET1002L monitor does not ship with a stand)

Low profile (“hostess”) position

To convert the stand into the high profile “upright” position, secure the thumbscrews into the high or “H” screw-holes in the bottom of the base.

Upright position

To convert the stand into the low profile “hostess” position, secure the thumbscrews into the low or “L” screw-holes in the bottom of the base.

User Manual ET1002L, ET1302L, ET1502L

Connector Panel

ET1002L, ET1502L:

ET1302L:

Note: Cable tie-down points can be used to tie down the cables with tie wraps. Simply loop the tie wraps through the cable tie-down points and around the

cable to secure cable connections.

User Manual ET1002L, ET1302L, ET1502L

Touch Monitor Connections

Source without USB Type-C Power Delivery function:

Connect one end of the HDMI or VGA-DB15-to-MICRO cable (sold separately Elo P/N: E710549) to the

monitor’s HDMI/VGA input connector and the other end to yourHDMI/VGA video source (tighten the

video cable’s screws on the VGA connector for best performance).

Connect the USB touch cable (USB Type-A to Type-C) between the monitor’s USB-C connector and your PC’s USB port. This cable only supports USB2.0.

Connect the audio cable between the monitor’s Audio line-in and your audio source (you can also use built-in audio via your HDMI cable)

Connect the power adaptor’s input connector to the power source. Connect the power adaptor’s DC output connector to the monitor’s input power jack.

The touch monitor ships in an OFF state. Press the power button to turn it on.

Source with USB Type-C (W/O Power Delivery function):

Connect the USB Type-C to Type-C cable (sold separately Elo P/N: E710364) between the monitor’s USB-C connector and your PC’s USB port.

Connect the power adaptor’s input connector to the power source. Connect the power adaptor’s DC output connector to the monitor’s input power jack.

The touch monitor ships in an OFF state. Press the power button to turn it on.

USB Type-C for everything - Source with USB Type-C W/ Power Delivery function 5V±5% 3A / 9V±5% 3A / 15V±5% 1.8A / 20V±5% 1.35A):

Connect the USB Type-C to Type-C cable (sold separately Elo P/N: E710364) between the monitor’s USB-C connector and your PC’s USB Type-C port.

The touch monitor ships in an OFF state. Press the power button to turn it on.

*Suggest using Elo USB Type-C to Type-C (Elo P/N: E710364) cable to prevent any compatibility issues.

This USB type C monitor is powered by USB port which complies with LPS and SELV circuit according to IEC 60950-1:2005, or complies with ES1 and PS2 circuit

according to IEC 62368-1:2014.

Note:

1. ET1002L USB Type-C input 5V only with condition: Brightness reduce to 60%, disable internal speaker, only support right peripheral port (default). User can

change the active peripheral port to top or left via OSD.

2. ET1302L USB Type-C input 5V only with condition: Brightness reduce to 80%, disable internal speaker, only support right peripheral port (default). User can

change the active peripheral port to top or left via OSD

3. ET1502L USB Type-C input 5V only with condition: Brightness reduce to 80%, disable internal speaker, only support right peripheral port (default). User can

change the active peripheral port to top or left via OSD.

4. USB-C pinout diagram shown on Monitor Specifications.

User Manual ET1002L, ET1302L, ET1502L

Installing Touch Technology Software Drivers

No additional drivers are required for your projected-capacitive touch monitor with Windows 7, Windows 10 and most versions of Mac OS X, Android or

Linux as it will use the built-in HID drivers in the Operating System. If the monitor is used with the Windows XP operating system, follow the steps below

to install the Windows XP touch driver.

To download the latest touch drivers:

1. Visit www.elotouch.com/Support/Downloads/Driver/DriverDownload/Default.aspx

2. Select the “Touch Drivers” from “Product Category” dropdown menu.

3. Select the operating system from “Operating System” dropdown menu.

4. Click on the driver version required for your touchscreen display.

User Manual ET1002L, ET1302L, ET1502L

Section 3: Mounting

Rear VESA Mount

ET1002L:

A four-hole 75x75mm mounting pattern available.The VESA FDMI-compliant counting is coded: VESA MIS-C, C.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Elo TouchSystems Monitor Handbücher

Elo TouchSystems

Elo TouchSystems 2639L Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems 1529L Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems IDS ET6553L Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems Entuitive 1229L Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems ET2200L Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems 1545L Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems ET1302L-2UWA-1-BL-G Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems 2239L Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems D-Series Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems IDS 3 Series Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems Entuitive ET1825L-8SWA-1 Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems 1715L Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems Entuitive ET1545L-XXWC-X Series Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems 1537L Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems 1541L Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems 1519LM Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems ET1915L Series Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems 1928L Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems 1528L Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems ET1302L Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems Entuitive 1525/27L Series Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems IDS ET3203L Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems Entuitive 1767L Series Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems ET2203LM Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung