Elvid OCM-7B-D FieldVision Bedienungsanleitung
USER
MANUAL
FIELDVISION
OCM-7B-D
7" ON-CAMERA MONITOR
2
Thank you for choosing Elvid.
The Elvid OCM-7B-D FieldVision is an on-camera monitor with
HDMI and composite audio and video inputs, as well as composite
video loop-through. The 7″LED panel’s native resolution is
1024 × 600, with an aspect ratio of 16:9 (native) that you can
set to 4:3. The onscreen menu makes it easy to ne-tune your
image, offering adjustments for brightness, contrast, hue, and
saturation. There are also broadcast-specic features like safety
frame markers and multiple display formats.
The FieldVision is equipped with advanced tools like Check Field
to help calibrate the monitor, a Focus setting to ne-tune your
focus, and Camera mode to scale the incoming video signal when
shooting on a DSLR. Onboard buttons provide quick shortcuts
to Camera, Focus, and Check Field modes, the safety frame and
center markers, and the onscreen volume bar. There’s also an
integrated speaker and a 3.5 mm stereo headphone output for
live audio monitoring.
INTRODUCTION
3
• Exposure to high sound levels can
cause permanent hearing loss. Avoid
listening at high volumes for extended
periods of time.
• Keep this product away from water
and any ammable gases or liquids.
• Do not expose this product to
humidity or extreme heat or cold.
• Make sure this product is powered off
when plugging it into a power source.
• Use only the correct, recommended
voltage.
• Do not attempt to disassemble or
repair this product.
• Do not place or store the FieldVision
facedown, since this can damage the
screen.
• Handle this product with care. Avoid
any unnecessary impacts to this
product.
• Do not block the vents in this product.
• Disconnect this product from its
power source before storage and
during electrical storms.
• Do not use chemical solutions to clean
this product. Clean it with only a soft,
dry cloth.
• Keep this product away from children.
• Make sure that this product is intact
and that there are no missing parts.
• To avoid damage to this product,
be careful not to overtighten or
improperly thread any of the threaded
ttings.
• All photos are for illustrative purposes
only.
PRECAUTIONS
4
TABLE OF
CONTENTS
Product Contents ................................................................... 6
Overview ...............................................................................7-8
Powering Options..............................................................9-10
Using the OCM-7B-D .......................................................11-12
The Sunshade.........................................................................13
The Menu ................................................................................14
Color Menu .............................................................................15
OSD Menu...............................................................................16
Function Menu.......................................................................17
Sound Menu............................................................................18
Using the Buttons.................................................................19
Specications .................................................................. 20-21
Troubleshooting..............................................................22-24
Notes....................................................................................... 25
FCC Statement......................................................................26
Warranty................................................................................ 27
5
PRODUCT
CONTENTS
NOTE: Additional battery plates and/or battery
adapters compatible with other popular brands can
be purchased by visiting www.elvidcinema.com
·7" On-Camera Monitor
·Shoe-mount ball head
·Sunshade
·Mini HDMI to
HDMI cable
·User manual
6
FIELDVISION
OVERVIEW
Headphone jack
Sunshade slots
Mode button
Status LED
Power button
Up button
Camera button
Menu button
Left Nav
Right Nav
Screen
Down button
Scale button
7
FIELDVISION
Composite video output
DC Input terminal
1/4″-20 Threaded socket
Battery mounting plate
Speaker
Composite video input
Power Switch
HDMI input
Audio input
8
POWERING
OPTIONS
There are two ways to power the FieldVision: AC or a
Canon LP-E6 battery.
AC POWER
To run the FieldVision via AC power, use the Elvid 12 V
DC adapter to connect the FieldVision’s DC power input to
your AC power source.
To turn on the FieldVision, press the power switch on the
back to the On position. The FieldVision will turn on and
enter standby mode, and the power indicator LED will
glow red. Press the Power button on the front to enter
ready mode. The power indicator LED will turn green and
then glow red.
CAMERA BATTERY
The FieldVision’s built-in battery plate accommodates
a Canon LP-E6 battery. This allows you to power the
monitor with a readily-available battery type that you may
already own. For more information on compatible battery
types, refer to Specications on page 21.
9
To install a compatible battery,
follow these steps:
1. Place a compatible battery in
the battery plate. Make sure
the battery’s bottom contacts
are aligned with the contacts
in the battery plate.
2. Slide the battery forward
until it locks into place.
To turn on the FieldVision,
press the power switch to the
On position. The FieldVision
will turn on and enter standby
mode, and the power indicator
LED will glow red. Press the
Power button to enter ready
mode. The power indicator
LED will turn green and then
glow red.
10
Inhaltsverzeichnis
Andere Elvid Monitor Handbücher
Elvid
Elvid OCM-7PWV Bedienungsanleitung
Elvid
Elvid Studiovision STV-150-4KH Bedienungsanleitung
Elvid
Elvid FIELDVISION OCM-89-4KH Bedienungsanleitung
Elvid
Elvid RVM-7B-ALT Bedienungsanleitung
Elvid
Elvid StudioVision STV-280-4KHDR Bedienungsanleitung
Elvid
Elvid WCM-758G SkyVision Bedienungsanleitung
Elvid
Elvid OCM-7B-4KV2 Bedienungsanleitung
Elvid
Elvid OCM-10-PSM Bedienungsanleitung
Elvid
Elvid RIGVISION RVM-5P-HDR Bedienungsanleitung
Elvid
Elvid STUDIOVISION SRM-7X2-4KH Bedienungsanleitung
