Emax Tinyhawk Bedienungsanleitung
Thanks for purchasing the Tinyhawk. Designed in California, assembled in China.
Tinyhawk
emax-usa.com
Disclaimer
Please read the disclaimer carefully before using this product. By using this product,
you hereby agree to this disclaimer and signify that you have read them carefully and
completely. This product is not suitable for people under the age of 18. Adult
supervision is highly recommended for kids under the age of 18.
Our Tinyhawk features open-source flight controller and Electronic Speed Controllers
to meet the FPV enthusiasts' need to upgrade their quad.
Please read the instruction manual and warnings carefully. Before every flight, make
sure the battery is fully charged and power connections are secure. DO NOT fly
around crowds, children, animals or objects. EMAX ACCEPTS NO LIABILITY FOR
DAMAGE(S) OR INJURIES INCURRED DIRECTLY OR INDIRECTLY FROM THE
USE OF THIS PRODUCT.
Precautions
Please follow the instructions to assemble and to operate this product in a proper
way.
Pilots do not use this product if you have physical or mental illness, dizziness,
fatigued, or use while under the influence of alcohol or drugs.
Please fly in a safe area away from people
Do not modify or use other parts and accessories not approved for the use of EMAX.
Do not use this product in harsh environments (such as winds, rain, lightning, snow,
etc.).
Do not use this product in a strong electromagnetic environment.
Support
Please visit emax-usa.com or emaxmodel.com for any updates or support needs.
Tinyhawk
emax-usa.com
Table of Contents
Product specification................................................................................................. 1
Tinyhawk............................................................................................................ 1
Parameter..........................................................................................................1
Radio .................................................................................................................1
Goggle...............................................................................................................1
Product list............................................................................................................. 2
Tinyhawk Structure................................................................................................2
Radio and Goggle Diagram ...................................................................................2
Radio ........................................................................................................................2
Battery and Charging.............................................................................................3
Operation...............................................................................................................3
Power................................................................................................................. 3
Binding............................................................................................................... 3
Trim.................................................................................................................... 4
Gimbal Calibration.............................................................................................. 4
Goggles.....................................................................................................................4
Battery and Charging.............................................................................................4
Assembly............................................................................................................... 5
Operation...............................................................................................................5
Power................................................................................................................. 5
Video Channel Selection....................................................................................5
Video Channel Auto Scanning............................................................................ 6
Screen Adjustments........................................................................................... 6
Flight.........................................................................................................................7
Radio Stick Controls..............................................................................................7
Left Stick Diagram.............................................................................................. 7
Right Stick Diagram ...........................................................................................7
Fly Tinyhawk.......................................................................................................... 8
Arming ...............................................................................................................8
Flying Modes...................................................................................................... 8
Line of Sight Flying.............................................................................................9
First Person View (FPV) Flying .......................................................................... 9
Tinyhawk................................................................................................................. 10
Propeller Direction and Mounting......................................................................... 10
Propeller Dismount.............................................................................................. 10
Tinyhawk VTX Settings........................................................................................... 11
Tinyhawk
emax-usa.com
VTX Channel Settings with the Button................................................................. 11
Button Menu Diagram.......................................................................................... 12
CE and FCC unlicensed user chart...................................................................... 12
Unlocked FCC HAM licensed user chart............................................................. 12
Changing VTX setting via Betaflight OSD............................................................ 13
Tinyhawk All-in-One Flight Controller ...................................................................... 14
Emax Tiny Receiver............................................................................................. 14
Binding Procedure............................................................................................ 14
Emax Tinyhawk Flight Controller (FC) ................................................................. 14
Stock Flight Controller Settings........................................................................ 14
Adjusting Software Settings (Betaflight Configurator)....................................... 15
Reprogramming Tinyhawk Flight Controller...................................................... 15
Set the Correct Settings................................................................................... 15
Tinyhawk
1
emax-usa.com
Product specification
Tinyhawk
Parameter
Diagonal wheelbase (without paddles)
75mm
Maximum size of the aircraft (without
antenna, cable tie)
125mm
Aircraft weight (without battery)
27.5g
Motor
TH08025 15000KV
Propeller
Avan Tinyhawk propeller 40x23x3
Main Flight Controller
F4（MATEKF411 firmware）
4 in one 3A ESC
EMAX Tiny receiver（Compatible with Frasky
remote control D8 mode）
Camera
600TVL CMOS camera
Transmitter
25mW Adjustable frequency 37CH
Battery
1 Cell 450 mAh HV lipo battery
Radio
Maximum appearance size
181×213×80(mm)
weight (without battery)
211g
Number of channels
6 Channels
Transmission frequency
2.4GHz ISM Band（2400MHz~2483.5MHz）
Output Power
22dbm
Modulation
GFSK
battery
1 cell 18650 lipo battery
Goggle
Maximum appearance size
140×153×90(mm)
weight (without battery)
398g
Resolution
480×272
battery
1 cell 18650 lipo battery
Tinyhawk
2
emax-usa.com
Product list
1. Tinyhawk × 1
2. Radio × 1
3. Goggle × 1
4. Instruction manual × 1
5. Battery × 1
6. Charger × 1
7. Gaggle battery case × 1
8. Extra Propeller Set (2x CW, 2x CCW)
9. Screwdriver x 1
Tinyhawk Structure
Radio and Goggle Diagram
Tinyhawk
3
emax-usa.com
Radio
Battery and Charging
This is a 6 channel 2.4 GHz radio, The radio is powered with an 18650 battery. The
radio comes with the battery installed; however if a reinstall is needed make sure the
negative side is on the side touching the spring of the radio. The radio can be
charged with a micro usb cable attached right below the speaker and power button.
Operation
Power
Power on and off by holding the power button for 2 seconds. The center light will turn
green when on.
Binding
The radio comes already bound to tinyhawk in the ready to fly kit. If binding is
necessary follow these steps:
1. Put tinyhawk into binding mode by pressing and holding the bind button while
powering on tinyhawk. A green light will power on tinyhawk flight controller
indicating in bind mode.
2. Put the radio into bind mode by first powering on the radio and then press
and hold both the throttle trim down and pitch trim down buttons for 2
seconds until a red light turns on next to the green light around the power
button. Release the buttons and the red and green lights will flash indicating
the radio is in binding mode.
Tinyhawk
4
emax-usa.com
3. Monitor the tinyhawk flight controller; a red light will flash on the board
indicating when binding has been completed.
4. Take the radio out of binding mode by pressing and holding the throttle trim
down and pitch trim down buttons for 2 seconds until the red lights turn off.
5. Unplug tinyhawk battery to power it down to take it out of binding mode.
6. Tinyhawk and radio will not be bound.
Trim
There are trim buttons for each axis on each gimbal. Each trim adjustment will beep
the radio and a longer beep will sound for center trim. Adjust roll and pitch trim when
hovering to achieve a stable hover with no gimbal input.
Gimbal Calibration
The radio comes pre-calibrated; however, recalibrating can help troubleshoot some
problems.
1. With the radio off, pull the right gimbal to the lower right corner and then
power on.
2. Release the right gimbal to its center position and red lights will flash around
the power button indicating in calibration mode.
3. Use the right gimbal and pitch forward to the maximum pitch forward point
then press the respective trim button (pitch positive trim) setting the maximum
point for the pitch axis.
4. Repeat for the right gimbal most minimum position and press the respective
trim button (pitch negative trim) to set the minum.
5. Repeat step 3 and 4 for each axis on both gimbals.
6. Press and hold both throttle trim buttons and both pitch trim buttons for 2
seconds to exit calibration mode.
Goggles
Battery and Charging
The battery cartridge comes preinstalled with a 18650 battery. If a battery reinstall is
required please use caution making sure to install with the correct polarity. The
battery can be charged in the cartridge with a micro USB cable. When the battery is
Tinyhawk
5
emax-usa.com
charging the indicator light is green. The indicator light will turn red when charging is
complete.
Assembly
Minimal assembly is required for proper operation of the goggles. Follow the steps
below.
1. Attach the two supplied antennas by screwing them on to the SMA
connection point.
2. Place the battery cartridge in the sleeve on the backside of the head strap.
3. Feed the power lead through the loop on the top side of the head strap and
plug in the power lead to the port on the goggles. This will power the goggles.
4. Please remove antennas and power lead when traveling/storing the goggles.
Operation
Power
Power on the goggles by plugging in the power lead from the battery cartridge.
Power off by unplugging the power lead from the battery cartridge.
Video Channel Selection
There are 2 buttons (CH and FR) that can manually select the correct channel and
frequency band. The table below shows the channel and frequency band map with
the respective frequency number. This is the recommended way to change channels
to the correct frequency on tinyhawk. The CH button will cycle through the channel
number (1-8) while the FR button will cycle through the frequency band
(A,B,E,F,R,H). The frequency band and channel number will be shown in the upper
right corner of the screen when cycling through channels.
Tip: Make sure tinyhawk is powered on. When cycling through channels it will be
easier to spot the correct one with the video feed from tinyhawk.
Caution: Make sure the goggles are on the correct channel that tinyhawk is on. The
current selected band and channel of tinyhawk is shown in the lower right corner of
the screen.
Tinyhawk
6
emax-usa.com
Video Channel Auto Scanning
There is a scanning function on the goggles to aid in finding which channel tinyhawk
is on. First power on tinyhawk then press the “A”button to start the auto scan mode.
This mode will cycle through all channels and select the channel with the best video
reception. The frequency band and channel number will be shown in the upper right
corner of the screen when cycling through channels.
Caution: If using this feature with multiple tinyhawks (or other drones with a vtx)
powered on, autoscan may select the wrong drones channel. We recommend
manually selecting the correct channel to prevent mismatch errors.
Screen Adjustments
The menu button (“M”) will bring up a menu where you can adjust brightness,
contrast, saturation, and language. To cycle through menu options, press the menu
button again. With the current selection highlighted, adjustments can be made
pressing the “FR”button to increment and “CH”to decrement. The menu will close
automatically after 3 seconds if no input was detected.
Inhaltsverzeichnis
Andere Emax Quadcopter Handbücher
