Always On socket
The Always On sockets are recommended for use with Audio Visual
(AV) equipment that requires constant power for timers, program
guide and recording features (e.g. DVR, PVR, VCR, cable box, digital TV
receivers, game consoles, hard drives or bedside alarms). This also
includes certain home theater projectors that require a cool down
period, including rear projection televisions. This will ensure constant
power is not interrupted to these devices.
Power Saving sockets – will be automatically switched off
The Power Saving sockets are recommended for Audio Visual (AV)
equipment that can be automatically switched off (e.g. televisions
without hard drives, amplifiers, stereos, speakers, sound bars, DVDs,
CDs, Blu-ray players, lamps).
Bluetooth® Smart Sensor
The Infrared Bluetooth® Smart Sensor activates the Power Saving
sockets, monitors activity and is also used to set the Active Powerdown®.
It comes with a 9.8 ft/3 m cable, LED light and two button control.
It can also be controlled via your Android/iOS mobile device, by
downloading and installing the emberconnect™ app.
Status lights
The Protected light should be on. If this light turns off or is dim, you
may have a ground-wiring problem in your home and you should
contact an electrician to properly ground the outlet.
The Power Saving Sockets On light shows the state of the Power Saving
sockets. When the light is on, the Power Saving sockets are powered;
if the light is off, no power is flowing to the Power Saving sockets.
Other features
• Overload protection circuit breaker reset button.
• 3 pins for use with standard North American wall sockets.
Using your Audio Visual equipment with the
Embertec Emberstrip® 8AV+
7
