Emerson Bettis Multiport Bedienungsanleitung

Installation, Operation and Maintenance Manual

MAN-02-10-93-0700-EN Rev. 0

May 2019

Bettis Multiport

Valve Actuator

ITable of Contents

Installation, Operation and Maintenance Manual

MAN-02-10-93-0700-EN Rev. 0

Table of Contents

May 2019

Table of Contents

Section 1: Introduction

Section 2: Features

Section 3: Mechanical and Electrical Installation

Section 4: Wiring

4.1 Power Wiring ................................................................................................ 7

4.2 Network Wiring ............................................................................................ 7

4.3 Monitor Relay Wiring..................................................................................... 7

4.4 Local ESD Wiring (Emergency Shutdown)...................................................... 7

4.5 Optional Remote Display Module (RDM) Wiring............................................ 7

Section 5: Local Display Module

5.1 Description ................................................................................................... 8

5.2 Operation ..................................................................................................... 9

5.3 Local Operation............................................................................................. 9

5.4 Operational Display..................................................................................... 10

5.5 Display Blanking.......................................................................................... 10

5.6 Alarms Display ............................................................................................ 10

Section 6: Field Setup Using MPA Cong Software

6.1 CommSetUp ............................................................................................... 12

6.2 User Setup Menus ....................................................................................... 13

6.3 Selecting New Home Port

(HP command using Control Knob setup) ............................................................. 15

6.4 Home Port LED Function............................................................................. 16

6.5 Home Port Calibration

(HC command using Control Knob setup) ............................................................. 16

6.6 Factory SetUp Menus .................................................................................. 17

6.7 Motor Type ................................................................................................. 18

6.8 Control Screen ............................................................................................ 19

Section 7: Field Setup Using Local Controls

7.1 Alarm History Display.................................................................................. 21

7.2 Setup Mode Display Sequence .................................................................... 22

II Table of Contents

Installation, Operation and Maintenance Manual

MAN-02-10-93-0700-EN Rev. 0

Table of Contents

May 2019

Section 8: Field Diagnostics

8.1 Fd Fault Codes............................................................................................. 25

Section 9: Remote Network Control

9.1 Modbus RTU ............................................................................................... 26

9.2 Foundation Fieldbus (FF) ............................................................................. 28

9.3 Probus DP Reduntant Networks with Redcom........................................... 30

9.4 DeviceNet ................................................................................................... 31

Appendix A: EC Declaration of Conformity Certicate

Appendix B: Wiring Diagrams

Installation, Operation and Maintenance Manual

MAN-02-10-93-0700-EN Rev. 0

May 2019

Section 1: Introduction

Introduction

WARNING:

Use caution when working on, with, or around valves and actuators. High pressures, forces, voltages, and

ammable media can be present.

WARNING

Read this manual in its entirety before installing, operating, or performing maintenance on the

MPA valve actuator.

WARNING

Failure to follow instructions for proper electrical wiring, storage, setup, and maintenance may cause

serious injury, damage equipment, or void the warranty. Refer to Manual E796 for instructions on storage,

electrical hook-up, and maintenance.

Ensure that the installation is carried out in accordance with EN 60079-14 and IEC 60079-14.

Regulatory information:

EEx d IIB T4 or EEx d IIB 120 degrees C (T4)

Tamb-20degress C to +60 degrees C

Installation, Operation and Maintenance Manual

MAN-02-10-93-0700-EN Rev. 0

May 2019

Section 1: Introduction

Introduction

Section 1: Introduction

The Multi-Port Actuator is an single turn actuator for control of multi-port ow selectors

(MPFS) with 3 to 8 ports. A typical application is oil or gas well selection for well production

testing as shown in Figure 1. Typically the MPA is the actuator of a Multi-Port Flow Selector

as shown in Figure 2. There are applications in other processes where control of multi-port

valves is required.

Figure 1 Typical Well Test Application

Figure 2 MPA mounted on 6"x16" MPFS

Installation, Operation and Maintenance Manual

MAN-02-10-93-0700-EN Rev. 0

May 2019

Section 2: Features

Features

Section 2: Features

The actuator features several assemblies as shown in Figure 3. Unique features of the

actuator are listed below.

Figure 3 MPA Features

Low Voltage

Interfaces between

CPU and TBM

Electrical Enclosure with

Motor Starter, Control

Transformer, DC Power

Supplies, Power Entry,

Termination Panel, User

Wiring, I/O Interfaces,

Torque Encorder

Integral

Disconnect

BETTIS 3000 Ft-Lb Gearbox

Geared for 1.5 RPM

Position Encorder

Coupling to MPFS Stem

Local Display Module (LDM)

with Display & Status LEDs,

Selector & Control Knobs,

CPU Module,

Network Communications,

Position Encoder

Motor

(not shown)

• MPA uses Bettis’s heavy duty gearbox with capacity of 3000’ lbs

Threaded Valve Stem

— Wide range of motors available for any voltage and torque

• Congurable for multi-port ow selectors from 3 to 8 ports

— Any port may be selected as home port and any port(s) may be skipped

— Actuator calibrated at factory for exact match to alignment of ow

selector ports

— Calibration parameters stored in nonvolatile memory and available to DCS

• 12-bit magnetic encoder coupled directly to valve stem for precision

position feedback

— Provides position measurement resolution of 0.088 degrees

• Bettis’s exclusive solid-state motor starter and control software provides precise

positioning of ow selector within +1 degree of selected port

• High performance microcontroller updates motor control output every 4mS for

precision motor control

• 12-bit magnetic encoder coupled directly to torque pinion for torque feedback

— Provides torque measurement resolution of 0.146% of full torque

Installation, Operation and Maintenance Manual

MAN-02-10-93-0700-EN Rev. 0

May 2019

Section 2: Features

Features

• MPA supports all network protocols available with all other Bettis actuators

— Modbus RS485 Bus or E>Net ring available

— Probus Redundancy with Redcom

— Foundation Fieldbus

— DeviceNet

— Ethernet Modbus TCP/IP

• I/O and alarm monitoring include:

— Integral circuit breaker/disconnect

— Motor overload and motor thermal

— Loss of control voltage

— Encoder failure

— Stall detection and alarming (detects mechanical faults)

— 3-Phase monitoring and phase correction to insure correct motor rotation

— ESD to send selector to home port (also goes to home port on fault)

— Monitor relay for hardwired relay contact status on fault

• Four models support ve 8-port MPFS (Also see motor type, Table 4)

Table 1. Four models support ve 8-port MPFS

Model MPFS Capacity RPM

Lb/Ft Nm 1Ph 3Ph DC

MPA 150 2x4 150 203 1.0 1.0 1.0

MPA 650 3x6 & 4x8 650 881 0.7 1.0 0.5

MPA 800 4x10 800 1085 0.6 0.9 0.5

MPA1500 6x16 1500 2034 0.3 0.5 0.3

• MPA includes local display module (LDM) standard

— Uses rugged, high visibility LED display for port number, torque, and

alarms (also displays setup menus and setup parameters)

— Multiple color LEDs display

— Port position within 1° of port

— Port position within 2° of port

— Motor running

— Over torque

— Position within 0.25° of home port

— Local mode |

— Off mode | Combined detection logic for two

selector switches

— Remote mode |

— Includes Local Off Remote selector switch

— Local control knob for Port selection and Jog control when enabled by User

Installation, Operation and Maintenance Manual

MAN-02-10-93-0700-EN Rev. 0

May 2019

Section 2: Features

Features

Figure 4 Local Display Module (LDM)

• Remote display module (RDM) option available

— RDM displays identical information and performs identical control as LDM

— Bettis’s patented combined switch logic allows detection of selector

switch position on LDM and RDM

— Allows remote control up to 4,000 feet (1,220 meters) away

— Alarming includes loss of communication with RDM

Figure 5 MPA with Remote Display Module (RDM)

Installation, Operation and Maintenance Manual

MAN-02-10-93-0700-EN Rev. 0

May 2019

Section 3: Mechanical and Electrical Installation

Mechanical and Electrical Installation

Section 3: Mechanical and

Electrical Installation

Do not connect power until you have gone through the following checklist

1. Does the information given on the nameplate correspond with the application?

2. Have all wire terminations and the equipotential bonding system been

connected correctly?

3. EEx d applications: are the cable entries, plugs and adaptors EEx d approved?

4. Are all cable entries of the correct internal diameter providing a good seal around

the cable?

5. Do the ambient and process temperatures correspond to the ratings on the

nameplate as shown below?

Inhaltsverzeichnis

Andere Emerson Controller Handbücher

Emerson

Emerson FL Bedienungsanleitung

Emerson

Emerson Tescom 44-1800 Series Bedienungsanleitung

Emerson

Emerson PACSystems RX3i DNP3 Bedienungsanleitung

Emerson

Emerson Fisher Y600A Series Bedienungsanleitung

Emerson

Emerson EC2-712 Bedienungsanleitung

Emerson

Emerson PACSystems RX3i Energy Pack Bedienungsanleitung

Emerson

Emerson Easyheat GC-1 Bedienungsanleitung

Emerson

Emerson PACSystems RX3i Bedienungsanleitung

Emerson

Emerson Fisher 480 Series Bedienungsanleitung

Emerson

Emerson IC695PNC001-BFBE1 2 Bedienungsanleitung

Emerson

Emerson Unidrive M400 Bedienungsanleitung

Emerson

Emerson Tartarini M Series Bedienungsanleitung

Emerson

Emerson FRANSEL REGAL 3 Bedienungsanleitung

Emerson

Emerson Fisher FIELDVUE DVC6200p Konfigurationshandbuch

Emerson

Emerson P159A Series Montage- und Bedienungsanleitung

Emerson

Emerson Site Supervisor Bedienungsanleitung

Emerson

Emerson Fisher 67C Handbuch

Emerson

Emerson EC2-552 Bedienungsanleitung

Emerson

Emerson Fisher 3024S Bedienungsanleitung

Emerson

Emerson Bettis RP4AF Bedienungsanleitung

Emerson

Emerson PACSystems RSTi-EP Bedienungsanleitung

Emerson

Emerson PeC C100 Bedienungsanleitung

Emerson

Emerson Bristol ControlWave LP Bedienungsanleitung

Emerson

Emerson Fisher L2e Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch

Regin

Regin CORRIGO L10 Bedienungsanleitung