Emerson RXi Web Panel Bedienungsanleitung

Quick Start Guide

GFK-3073D

December 2020

RXi –Web Panel

QUICK START GUIDE

i RXi Web Panel Quick Start Guide GFK-3073D

Warnings and Caution Notes as Used in this Publication

WARNING

Warning notices are used in this publication to emphasize that hazardous voltages, currents, temperatures, or other

conditions that could cause personal injury exist in this equipment or may be associated with its use.

In situations where inattention could cause either personal injury or damage to equipment, a Warning notice is used.

CAUTION

Caution notices are used where equipment might be damaged if care is not taken.

Note: Notes merely call attention to information that is especially significant to understanding and operating

the equipment.

These instructions do not purport to cover all details or variations in equipment, nor to provide for every possible

contingency to be met during installation, operation, and maintenance. The information is supplied for informational

purposes only, and Emerson makes no warranty as to the accuracy of the information included herein. Changes,

modifications, and/or improvements to equipment and specifications are made periodically and these changes may or

may not be reflected herein. It is understood that Emerson may make changes, modifications, or improvements to the

equipment referenced herein or to the document itself at any time. This document is intended for trained personnel

familiar with the Emerson products referenced herein.

Emerson may have patents or pending patent applications covering subject matter in this document. The furnishing of

this document does not provide any license whatsoever to any of these patents.

Emerson provides the following document and the information included therein as-is and without warranty of any

kind, expressed or implied, including but not limited to any implied statutory warranty of merchantability or fitness for

particular purpose.

 
ii RXi Web Panel Quick Start Guide GFK-3073D 
Table of Contents 
Regulatory Information..............................................................1 
Initial Setup ..............................................................................1 
Environmental Conditions............................................................................................. 1 
Intended Use ................................................................................................................ 1 
Jumpers and Connectors Locations ............................................................................. 2 
Setting Jumper Functions .................................................................................... 2 
Socket Description .............................................................................................. 2 
Connecting Input Power (24V DC-in) ............................................................ 2 
LED Indicators Operation Status LEDs (Screen) ......................................................... 5 
Ethernet Port Operation LEDs .............................................................................. 5 
Configuration and Setup.............................................................6 
Chromium Password Settings ...................................................................................... 6 
Mounting Information................................................................7 
Panel Mount ................................................................................................................. 7 
Installation Steps .......................................................................................................... 8 
Mounting to Web Panel ................................................................................................ 9 
Mounting to Modular Display ........................................................................................ 9 
VESA Mount ............................................................................................................... 12 
Technical Support & Contact Information .................................16 

1 RXi Web Panel Quick Start Guide GFK-3073D

Regulatory Information

The FCC requires the following note to be published according to the FCC guidelines:

NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAUTION

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to

operate the equipment.

Industry Canada requires the following to be published: CAN ICES-3 (A)/NMB-3 (A)

Initial Setup

Environmental Conditions

Environmental conditions as identified in Section 1.1 shall be followed during installation and operation.

Intended Use

The RXi Web Panel is intended for use in industrial environments only. Adherence to supplied documentation is part of the

intended use. Installation, commissioning, and maintenance shall be carried out by qualified personnel.

2 RXi Web Panel Quick Start Guide GFK-3073D

Jumpers and Connectors Locations

Setting Jumper Functions

Before installing the Web Panel, please set the necessary functions following the chart below.

Note: To determine Pin 1 of the jumper and port, please observe the marking beside the plug. it will be marked as “1”, a

bolded line, or a “△”; see the welding plate on the backside, the square welding plate is Pin 1.

(1) Setting Jumper Functions (SW1)

SW1: 2bit switching ON/OFF, used to set the recording and the starting mode of the Motherboard.

SW1

OFF

1.BOOT_MODE1_S

DOWNLOAD MODE

NORMAL MODE

2.BOOT_DEV

DEFAULT

Figure 1: Jumper Function

Socket Description

Connecting Input Power (24V DC-in)

To connect to power, follow these steps:

1. Verify that the power cable is not energized.

2. Loosen the screw clamps on the mating power connector.

3. Strip the insulation from the power cables.

4. Secure the power cable to the mating connector, noting polarity, and tighten

the screw clamps. The torque for the attaching screws is 0.3 Nm (2.26 in-lb).

5. Apply dc power to the unit. During normal startup and operation, the LED status

indicator displays as follows:

•Solid amber while the RXi - Industrial Display unit is starting up

•Solid green during normal operation

6. Once power is applied, the unit begins initializing. The first thing to display is the splash screen.

Be sure to connect a DC power cord to this 3-pin power connector. Using a voltage out of the range may fail to boot the

system or cause damage to the system board.

Before connecting the Web Panel to other devices, please read this manual carefully first to prevent damage to the

Motherboard.

3 RXi Web Panel Quick Start Guide GFK-3073D

Power Socket (DC_IN1)

DC_IN1: (Conn. Header Socket, 3.5mm, 1 x 3PIN), used to provide 24V voltage for the system.

Figure 2: Power Socket

DC_IN1 Pin#

Signal

Pin1

Pin2

DC_IN-

Pin3

DC_IN+

USB Socket (USB_OTG1/USB1)

USB_OTG1: Conn. Micro-USB, B-Type Female, SMD-5P With DIP 4pin, used to load system firmware

Figure 3: USB, LAN, and COM Ports

USB_OTG1 Pin#

Signal Name

5V_USB_OTG

USB_OTG_DN

USB_OTG_DP

USB0_ID

GND

USB1: Type A connector, supports USB Host.

USB1 Pin#

Signal Name

5V_USB_HOST1

USBDN_DM1

USBDN_DP1

GND

4 RXi Web Panel Quick Start Guide GFK-3073D

LAN Socket (LAN1)

LAN 1: Conn. I/O Port, RJ45, 1000M, provides a solid RJ45 Ethernet Dock.

Figure 4: LED Status Lights

1. Connecting Socket (COM1)

COM1: Conn. I/O Port, DB9, Male. Standard DB9 port, provide 1 route for RS232/422/485.

COM1 Pin#

RS232

RS422

RS485

TXD-

DATA-

RXD

TXD+

DATA+

TXD

RXD+

RXD-

GND

5 RXi Web Panel Quick Start Guide GFK-3073D

Debug Socket (DEBUG1)

DEBUG1: Conn. 1.25mm, (DF14 with pointing) SMD-4P, used for debugging information.

DEBUG Pin#

Signal Name

3P3V_S0_IO

UART1_TXD_DEBUG

UART1_RXD_DEBUG

GND

SD-Card Socket (SD1)

SD1: Socket, Micro SD/TF Card, 9pin, SMD, supports Micro SD/TF Card devices.

BAT1 Socket (BAT1)

BAT1: BAT Socket, BS-10-A1B0J001, 20mm SMT, supports non-chargeable batteries. CR-2032

Backlight Board Socket (BTB_MAIN_TB572B_1)

BTB_MAIN_TB-572B_1: Conn. Female, WCON, 2243-225M3CUT, 2 x 25P, 2.00mm, 180°, H=4.35, 10u”, SMD-50P, TB-572B

Backlight Board Socket.

LED Indicators

Operation Status LEDs (Screen)

All RXi Industrial Displays have a tri-color LED built into the screen that provides a visual indication of the

operation status.

LED State

System State

Amber, Solid

Operating system starting

Green, Solid

Normal operating state

Red, Blinking

CPU over temperature 90C

Off

Power not applied to the unit

Ethernet Port Operation LEDs

Figure 5:Ethernet Port LEDs

6 RXi Web Panel Quick Start Guide GFK-3073D

Configuration and Setup

Chromium Password Settings

The user/root default password is EMrootroot. Here are instructions to change the password.

1. Click the user password icon

Figure 6: User Password Icon

2. Enter the default (old) and new password then click the Set user password or Set root password button to

submit the new password.

Figure 7: Set User Password

7 RXi Web Panel Quick Start Guide GFK-3073D

Mounting Information

Panel Mount

The RXi Web Panel can be panel-mounted as presented in the section entitled Installation Steps.

A Type 4, Type 4X, or IP 66 rating is achieved when mounted to the flat surface of a sufficiently rated enclosure. Please follow

the instructions in the section entitled Installation Steps.

Panel Thickness: 16

to 7 Gauge (1.6 to 5 mm)

Figure 8: Panel Cutout Dimensions

Width

Height

Display Size (in)

Width (mm)

Height (mm)

183.5

128.5

255.5

174

317

214.5

398

245.5

482

297

581

360

All panel cutout measurements should be within ±0.5 mm.

Values presented are width and height only.

For IP66 installations of 12-inch displays (IC758CSW12SCREEN-A and IC758COW12SCREENSLR-A) use a 14 to 7 gauge (2 to 5 mm) thick panel.

Inhaltsverzeichnis

Andere Emerson Touchscreen Handbücher

Emerson

Emerson Site Supervisor 10.1 Bedienungsanleitung

Emerson

Emerson Rosemount 752 FOUNDATION Bedienungsanleitung

Emerson

Emerson Rosemount 752 Bedienungsanleitung