Emerson Rosemount 5408 Bedienungsanleitung

Quick Start Guide

00825-0300-4408, Rev BA

May 2019

Rosemount™ 5408 and 5408:SIS Level

Transmitters

Parabolic Antenna

Contents

About this guide...........................................................................................................................3

Confirm approval type..................................................................................................................5

Components of the parabolic antenna......................................................................................... 6

Mount the transmitter..................................................................................................................8

Adjust the inclination of the antenna..........................................................................................17

Connect the air purging..............................................................................................................20

Adjust display orientation (optional).......................................................................................... 21

Prepare the electrical connections..............................................................................................22

Connect wiring and power up.....................................................................................................29

Configure transmitter using Guided Setup................................................................................. 33

Quick Start Guide May 2019

2 Rosemount 5408 and 5408:SIS Level Transmitters

1 About this guide

This Quick Start Guide provides basic guidelines for the Rosemount 5408

and 5408:SIS Level Transmitters. Refer to the Rosemount 5408 and 5408:SIS

with HART® Reference Manual and Rosemount 5408 with FOUNDATION™

Fieldbus Reference Manual for more instructions. The manuals and this

guide are also available electronically on Emerson.com/Rosemount.

WARNING

Failure to follow safe installation and servicing guidelines could result in

death or serious injury.

•Make sure the transmitter is installed by qualified personnel and in

accordance with applicable code of practice.

•Use the equipment only as specified in this manual. Failure to do so may

impair the protection provided by the equipment.

•For installations in hazardous locations, the transmitter must be installed

according to the Rosemount 5408 and 5408:SIS Product Certifications

document and System Control Drawing (D7000002-885).

•Repair, e.g. substitution of components etc., may jeopardize safety and

is under no circumstances allowed.

Explosions could result in death or serious injury.

•Verify that the operating atmosphere of the transmitter is consistent

with the appropriate hazardous locations certifications.

•Before connecting a handheld communicator in an explosive

atmosphere, ensure the instruments are installed in accordance with

intrinsically safe or non-incendive field wiring practices.

•In Explosion-proof/Flameproof and Non-Incendive/Type n installations,

do not remove the transmitter covers when power is applied to the unit.

•Both transmitter covers must be fully engaged to meet Explosion-proof/

Flameproof requirements.

Electrical shock could cause death or serious injury.

•In Explosion-proof/Flameproof and Non-Incendive/Type n installations,

avoid contact with the leads and terminals. High voltage that may be

present on leads can cause electrical shock.

•Make sure the mains power to the transmitter is off and the lines to any

other external power source are disconnected or not powered while

wiring the transmitter.

May 2019 Quick Start Guide

Quick Start Guide 3

WARNING

Process leaks could result in death or serious injury.

•Make sure that the transmitter is handled carefully. If the process seal is

damaged, gas might escape from the tank.

WARNING

Physical access

Unauthorized personnel may potentially cause significant damage to

and/or misconfiguration of end users’ equipment. This could be

intentional or unintentional and needs to be protected against.

Physical security is an important part of any security program and

fundamental to protecting your system. Restrict physical access by

unauthorized personnel to protect end users’ assets. This is true for all

systems used within the facility.

CAUTION

Hot surfaces

The flange and process seal may be hot at high process temperatures. Allow

to cool before servicing.

Quick Start Guide May 2019

4 Rosemount 5408 and 5408:SIS Level Transmitters

2 Confirm approval type

For hazardous locations transmitters labeled with multiple approval types:

Procedure

Permanently mark the checkbox of the selected approval type(s).

Figure 2-1: Label with Multiple Approval Types

May 2019 Quick Start Guide

Quick Start Guide 5

3 Components of the parabolic antenna

3.1 Components of the threaded version

Figure 3-1: Components

[([*['[&[%[$[)

A. Antenna

B. Purge plug kit

C. Threaded sleeve

D. M20 adapter

E. Lock nut BSPP (G) 3½-in.

F. Antenna adapter with ball joint

G. O-ring

Quick Start Guide May 2019

6 Rosemount 5408 and 5408:SIS Level Transmitters

3.2 Components of the welded version

Figure 3-2: Components

[([.[)[*[/[,[-['[&[%[$[+

A. Antenna

B. Purge plug kit

C. Threaded sleeve

D. M20 adapter

E. Weld protection plate

F. Flange ball

G. O-ring

H. Clamp flange

I. Washer

J. M8 screw

K. Weld protection bar

L. Ball joint

May 2019 Quick Start Guide

Quick Start Guide 7

4 Mount the transmitter

4.1 Mount the flanged version

Procedure

1. Place a suitable gasket on the tank flange.

2. Lower the flange and antenna assembly into the nozzle.

3. Tighten the bolts and nuts with sufficient torque for the flange and

gasket choice.

Postrequisites

1. Adjust the inclination of the antenna (see Adjust the inclination of

the antenna).

Quick Start Guide May 2019

8 Rosemount 5408 and 5408:SIS Level Transmitters

2. Connect the air purging system (see Connect the air purging).

4.2 Mount the threaded version

Procedure

1. Remove the lock nut.

2. Mount the O-ring.

3. Mount the antenna adapter on flange/manhole cover. Ensure the

antenna adapter fits tightly to the flange/manhole cover.

A. Ø 3.98 ± 0.02 in. (Ø 101 ± 0.6 mm) or G 3½-in.

B. Max. 0.59 in. (15 mm)

May 2019 Quick Start Guide

Quick Start Guide 9

4. Remove the M20 adapter and visually inspect the O-rings for damage

and dirt.

5. Carefully insert the antenna.

6. Secure the antenna.

27 mm

Torque 180 in-lb (20 N-m)

Quick Start Guide May 2019

10 Rosemount 5408 and 5408:SIS Level Transmitters

Andere Handbücher für Rosemount 5408

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Emerson Sender Handbücher

Emerson

Emerson Rosemount Ultrasonic 3107 Bedienungsanleitung

Emerson

Emerson Micro-Motion 2400S Kurzanleitung

Emerson

Emerson Rosemount 708 Bedienungsanleitung

Emerson

Emerson Rosemount 3101 Bedienungsanleitung

Emerson

Emerson Rosemount MCL-220 Bedienungsanleitung

Emerson

Emerson PT5-30L-FLR Bedienungsanleitung

Emerson

Emerson Rosemount 2051 Wireless Series Bedienungsanleitung

Emerson

Emerson Rosemount 3051S Series Bedienungsanleitung

Emerson

Emerson Rosemount 3051S Series Bedienungsanleitung

Emerson

Emerson MICRO MOTION 1500 Bedienungsanleitung

Emerson

Emerson Micro Motion IFT9701 Bedienungsanleitung

Emerson

Emerson Rosemount 248 Bedienungsanleitung

Emerson

Emerson Micro Motion 5700 Bedienungsanleitung

Emerson

Emerson Rosemount 5600 Series Bedienungsanleitung

Emerson

Emerson Rosemount 3144P Bedienungsanleitung

Emerson

Emerson Rosemount 702 Bedienungsanleitung

Emerson

Emerson PT5N FLR Series Bedienungsanleitung

Emerson

Emerson Rosemount 3051HT Bedienungsanleitung

Emerson

Emerson Rosemount 702 Bedienungsanleitung

Emerson

Emerson Micro Motion 1000 Series Kurzanleitung

Emerson

Emerson Rosemount 3144P Bedienungsanleitung

Emerson

Emerson Rosemount HART Modbus VeriCase 3308 Series Bedienungsanleitung

Emerson

Emerson Rosemount 1066 Bedienungsanleitung

Emerson

Emerson Rosemount 3051S Series Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung