EMG FLAT 6 MEDIUM Service-Handbuch

0230-0289rA

INSTALLATION INFORMATION

EMG MODEL: HUMBUCKING MOUNTING RINGS

PO BOX 4394

SANTA ROSA, CA

95402 USA

P (707) 525-9941

F (707) 575-7046

EMGPICKUPS.COM

Mounting Ring Data:

EMG Mounting Rings are available for 6, 7, and 8 String Humbucking Pickups.

There are 3 styles available; flat, angled, and radius angle with 3 heights available for each style of ring. In addition, all mounting rings are

adaptable to a 3-screw mounting format allowing the pickup to be adjusted paralell under the strings. Pickup rings are supplied without pickup

mounting holes so you can choose either the traditional 2-screw mount or the 3-screw mount. Alignment bosses are molded into the pickup

ring and by using a 7/64 inch (2.5mm) drill they are easily modified per your choice. If the pickup cavity in your guitar is routed to fit the 3-screw

mount then we recommend its use because it allows paralell adjustment of the pickup to the angle of the strings, and adds pickup mounting

strength. EMG Mounting rings are made to match EMG Pickup housings, but will work fine with most any humbucking pickup. Colors available

are Black, White, and Ivory. Made in the U.S.A.

3.50

(88.9)

1.780

(45.2)

1.43

(36.3)

3.17

(80.5)

2.76

(70.1)

1.51

(38.3)

3.09

(78.5)

1.43

(36.3)

3.875

(98.4)

3.55

(90.2)

1.51

(38.3)

3.15

(80.0)

1.780

(45.2)

3.48

(88.3)

1.780

(45.2)

3.860

(98.0)

1.43

(36.3)

1.51

(38.3)

3.53

(89.6)

4.250

(108)

3.930

(99.8)

.125

(3.17)

.200

(5.0)

.350

(8.9)

.187

(4.75)

.285

(7.24)

.374

(9.5)

.250

(6.35)

.347

(8.8)

.437

(11.1)

2.0

.285

(7.24)

.347

(8.8)

2.0

R 42.5”

.200

(5.0)

.137

(3.48)

2.0

R 42.5”

2.0

.400

(10.1)

.333

(8.45)

6 STRING 7 STRING 8 STRING

Mounting Ring Dimensions (top view):

Mounting Ring Dimensions (side view): Ring Dimensions (side views):

FLAT ANGLED RADIUS/ ANGLED

General Notes:

EMG Humbucking Pickups and EMG Metalworks Pickups are

threaded 3/48 in the adjustment tab. There is no metric match for this thread.

Use the 3/48 screws supplied for pickup mounting.

Installation Instructions:

EMG Mounting Rings

.109 (7/64) Drill

(2.5mm)

Drilling Holes:

No matter which mounting format you choose, either 2 or 3 screw, the hole(s) will need

to be drilled. The material is ABS Plastic and relatively soft. It can be easily drilled by hand.

Use a 7/64 drill bit or 2.5mm. Drill from the backside using the molded bosses as guides.

Before Drilling:

Using the 2 Scew mount adapter:

Install the 2 screw adapter as shown in the diagrams below. Use the short 3/48 screw to mount

the adapter to the adjustment tab. Install the pickup as shown in the mounting ring.

R .187 TYP ALL

INSIDE RADII

(85.6)

3.370

(40.6)

1.600

(72.1)

2.840

(22.86)

.900

3/48 Thread

EMG Metal Works

Cover Caps

3/48 Thread

EMG Molded

Cover Caps

If you are using angled or radius rings and opt to use the 3 screw mount you should make

the decision which side of the pickup you want the two screws on, either low or high strings.

See the diagram below showing the two screws on the Low E side as an example. Since there

are 3 bosses on each side of the ring, the choice is yours which side of the pickup has 2 screws.

Install the adapter

as shown

Typical Humbucking

cutout dimensions:

2 screws shown

this side

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Beliebte Zubehör für Musikinstrumente Handbücher anderer Marken

Behringer

Behringer AIRPLAY GUITAR AG10 Bedienungsanleitung

FEURICH

FEURICH BASIC Bedienungsanleitung

thomann

thomann Harley Benton JA Bedienungsanleitung

NeoTech

NeoTech PAD-IT TUBA HARNESS Bedienungsanleitung

Duncan

Duncan SH-8n Invader Kurzanleitung

Palmer

Palmer The Junction PDI-09 Bedienungsanleitung

GuitarPCB

GuitarPCB Fuzzy Bee v2 Handbuch

Yamaha

Yamaha Tough-Terrain T-335 Bedienungsanleitung

LEWISMIDI

LEWISMIDI CZ Patch Library Bedienungsanleitung

Free The Tone

Free The Tone LB-2 Bedienungsanleitung

Duncan

Duncan Apollo Jazz Bass - neck Handbuch

dbx

dbx dB10 Bedienungsanleitung

TLA

TLA Tuning-Set CTS-32-C Bedienungsanleitung

Solo Music Gear

Solo Music Gear JEK-1 Bedienungsanleitung

Duncan

Duncan HyperSwitch Bedienungsanleitung

CNC Design

CNC Design QUAD COIL WINDER MK2 Bedienungsanleitung

FuzzDog

FuzzDog 3PDT Bedienungsanleitung

Hipshot

Hipshot Universal Mounting Plate Bedienungsanleitung