SANTOS: Instruction and Maintenance Manual
98111 EN 4.3 - 02 2021 4 / 15 www.santos.fr
IMPORTANT SAFEGUARDS
When using, cleaning or maintaining the machine, always follow these instructions:
Read all instructions
IMPROPER USE
1. Do not use this appliance to press any food other than limes, lemons, oranges
and grapefruit.
2. Cleaning in a jet of water or a high pressure spray is prohibited.
3. The base must not be immersed in water.
4. Never use the appliance if the power cord is damaged. It must be replaced by
either a SANTOS approved dealer or a person with similar qualifications to
avoid any danger.
5. The appliance must be unplugged before any intervention on it: cleaning,
general care, maintenance.
6. It is forbidden to operate the appliance on a surface with a slope in excess of
10° with respect to the horizontal plane. The feet of the machine must always be
resting on this surface.
7. The use of spare parts other than certified original SANTOS parts is prohibited
8. Never connect several appliances to the same power socket.
9. Never use the machine outdoors.
10.Never place the appliance close to or on a source of heat.
11.This appliance is a professional machine designed exclusively for professional
use. It is not designed for household use.
12.This appliance is not designed for use by people (including children) whose
physical, sensorial or mental capacities are impaired or by people with no
experience or knowledge, unless they have been supervised or given training in
the use of the appliance beforehand by a person responsible for their safety.
Supervise children to ensure they do not play with the appliance.
13.This appliance is intended for use in communal areas, e.g. in the kitchens of
restaurants, canteens, hospitals and artisan trades such as bakeries, butcher's
shops, etc., but not for continuous mass production of food.
ELECTRICAL CONNECTION:
The appliance is available in with a choice of two voltages for the power supply
•220-240V 50/60 Hz single phase
•110-120V 50/60 Hz single phase
Note: This appliance can operate at both 50Hz and 60Hz without any adjustments.
Line protection: the appliance should be connected to a standard 2-pole + earth electric
socket. The installation should be fitted with an RCD and a fuse rated at 16A. The
appliance must be earthed
Note: You will find it easier to understand the next few paragraphs if you refer to
the diagrams at the end of this manual.
!
408007-009-010-011-152-252 G22E 4/14
