EMM Labs DV2 Bedienungsanleitung
© EMM Labs Inc., All Rights Reserved. EMM Labs reserves the right to amend specifications & design without notice.
DV2 INTEGRATED CONVERTER OWNER’S MANUAL
001
Version 1.6
Welcome 002
ank you for choosing EMM Labs
© EMM Labs Inc., All Rights Reserved. EMM Labs reserves the right to amend specifications & design without notice.
DV2 INTEGRATED CONVERTER OWNER’S MANUAL
Front Panel & Functions
Features & Specifications
DV2 Integrated Converter
003
Table Of Contents
Welcome 002
Table of Contents 003
006
007
009
Rear Panel & Functions 010
Operation 012
Infrared Remote Control 021
Safety Instructions 004
Warranty 005
DSD, DXD and MQA®Audio 019
© EMM Labs Inc., All Rights Reserved. EMM Labs reserves the right to amend specifications & design without notice.
DV2 INTEGRATED CONVERTER OWNER’S MANUAL
Safety Instructions
Safety Instructions
Prior to Installing you new EMM Labs product please read the following safety
instructions:
• Read and follow all instructions.
• Keep these instructions.
• Do not use or install product near any sources of water, rain and/or
moisture.
• Clean using only a dry cloth.
• Install only in accordance with the manufacturer’s instructions.
• Refer all servicing to approved service personnel.
• Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
• Do not install product outdoors or in direct sunlight.
• Leave at least 10cm or 4 inches around product to ensure proper
ventilation.
• Do not place product near strong electrical or magnetic
radiation/emissions or near a power amplifier.
This EMM Labs product must be connected to a mains socket outlet with a protective
earthing connection (grounding pin).
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPARATUS TO WATER OR MOISTURE.
EEC: This product has been designed and tested to comply with the limits set out in
EN55013, EN55020 and EN 60065:2009 (electrical safety).
004
© EMM Labs Inc., All Rights Reserved. EMM Labs reserves the right to amend specifications & design without notice.
DV2 INTEGRATED CONVERTER OWNER’S MANUAL
Warranty
Warranty
EMM Labs warrants the DV2 product against defects in material and
workmanship under normal use and service for a period of time
specied by the product’s serial number from the date of rst
delivery to the owner. e warranty time period is 5 years. Warranty
is limited to the original owner and is non-transferable.
EMM Labs will pay for return shipping charges back to the owner
when the product is sent to EMM Labs within the rst 90 days aer
purchase (US and Canada end-users only). Otherwise, owner will be
responsible for all shipping charges to and from EMM Labs.
For all warranty claims, a copy of the original invoice must
accompany the product.
Opening the product or modifying it in any way by the owner,
including but not limited to cryogenic treatment, will void any
warranty.
and shipping instructions before shipping any product to EMM Labs.
EMM Labs products are sold worldwide through authorized dealers
with restricted territories. EMM Labs product purchased from
non-authorized dealers or from a dealer selling outside his / her
authorized territory will automatically void product warranty.
005
© EMM Labs Inc., All Rights Reserved. EMM Labs reserves the right to amend specifications & design without notice.
DV2 INTEGRATED CONVERTER OWNER’S MANUAL
006
DV2 INTEGRATED CONVERTER
DV2 INTEGRATED CONVERTER
e DV2 builds on EMM Labs ground breaking DAC technology used in our multi-award
winning agship DA2 converter.
e DV2 features EMM’s newly developed high resolution volume control system,
VControl™. VControl™ is completely transparent at any volume setting and has wide
attenuation range. Along with a multitude of inputs, the DV2 also supports DSD, 2xDSD,
DXD, and includes MQA® technology, enabling playback of MQA® audio les and streams
via USB Audio, delivering the sound of the original master recording.
e DV2 has:
• 16xDSD proprietary discrete dual dierential (MDAC2™)
D-to-A converters
• New high resolution volume control system (VControl™) with
High/Low output gain control
• Latest generation 16xDSD Meitner Digital Audio Translator
(MDAT2™) signal processing technology
• Latest generation enhanced MFAST™ technology for instant
signal acquisition and jitter-free performance
• Next generation MCLK2™ proprietary master clock
• New USB interface with hardware galvanic isolation
• 24bit,192kHz and DSD support on all inputs DSD, 2xDSD,
DXD (352/384kHz) and MQA® full decoding over USB
• Exclusive aerospace-grade ceramic circuit boards
• Supports DSD for CD/SACD playback over EMM Optilink
• Polarity inversion performed in the digital domain
• USB port for future soware upgrades
© EMM Labs Inc., All Rights Reserved. EMM Labs reserves the right to amend specifications & design without notice.
DV2 INTEGRATED CONVERTER OWNER’S MANUAL
007
Features & Specifications
Features & Specications
2-Channel D/A conversions:
• from PCM (44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz) and DSD to analog
• from 352DXD, 384DXD, DSD, 2xDSD and full MQA® decoding to analog via USB
• from 44.1kHz and DSD to analog via EMM Optilink (SACD/CD playback)
Supported digital input formats:
• AES/EBU
• Two COAX SPDIF
• Two TOSLINK SPDIF
• EMM Optilink
• USB Audio
Analog outputs and impedances:
• Balanced on XLR (300Ω)
• Unbalanced on RCA (150Ω)
Output levels (High/Low):
• XLR outputs: 7.0/5.0V (+19.1/16.2dBu)
• RCA outputs: 3.5/2.5V ((+13.1/10.2dBu)
Note:
1. XLR analog outputs are balanced with pin 2 hot, pin 3 cold and pin 1 ground.
2. For proper digital audio data transfer (especially high resolution PCM and DSD)
appropriate high quality TOSLINK, SPDIF, AES and USB 2.0 cables must be used.
© EMM Labs Inc., All Rights Reserved. EMM Labs reserves the right to amend specifications & design without notice.
DV2 INTEGRATED CONVERTER OWNER’S MANUAL
008
Features & Specifications
Features & Specications
System control via Infrared remote and serial RS-232 ports
Power supply:
• Power factor corrected
• Factory set to 100V or 115V or 230V, 50/60Hz operation
• Power consumption: 30W
• Remote control: Infrared
• Dimensions W x D x H: 438 x 400 x 161mm
• Weight: 17.2kg
© EMM Labs Inc., All Rights Reserved. EMM Labs reserves the right to amend specifications & design without notice.
DV2 INTEGRATED CONVERTER OWNER’S MANUAL
009
Front Panel & Functions
Front Panel & Functions
1. Standby/Power-Save button:
Toggles the operation between on and power-save mode. In power save mode the
remote control and all front panel functions become inactive.
2. Display
3. Button Bar:
Context sensitive function buttons.
4. Volume Control
© EMM Labs Inc., All Rights Reserved. EMM Labs reserves the right to amend specifications & design without notice.
DV2 INTEGRATED CONVERTER OWNER’S MANUAL
010
Rear Panel & Functions
Rear Panel & Functions
1. Product model and serial number indicator:
Warranty void if model/serial number indicator is not attached to unit, missing or
damaged whereby serial number cannot be seen.
2. Main Power Switch
3. Product VOLTAGE indicator:
Indicates working voltage of the DV2. Only use with indicated line voltage.
4. Main Power connector
© EMM Labs Inc., All Rights Reserved. EMM Labs reserves the right to amend specifications & design without notice.
DV2 INTEGRATED CONVERTER OWNER’S MANUAL
Inhaltsverzeichnis
Andere EMM Labs Medienkonverter Handbücher
