Emoka EMK-730C Montageanleitung
The First Foot Massager Combined with Chinese
traditional Acupuncture Therapy and Heated Air
Massaging to Improve Blood Circulation, relief
painful, sore, tired feet.
Acu-Point Therapy Foot Massager
EMK-730C
Operation Tips:
Noise after pressing “Pressure” button: after pressing the "Pressure" button, you will hear the gear
sound--that is the nature of modes switching, then press the "Inflatable" button to adjust the pressure
until it reaches the pressure level you like, and the gear sound will be gone.
Noise after choosing the Slow Speed Mode: when you choose the Slow Speed mode, it is the nature
to hear the sound from the 192 acupuncture nodes and that sound will disappear after switching it to
Fast Speed mode.
Please do NOT stand up on the 192 nodes massage board. It'll cause damage to the panel inside.
No power: Please turn on the Power Switch Button located on the Bottom of the Massager before
pressing the On/Off Button from the touch panel of the massager.
- Adjustable 4 Unique airbags strengthen finger
pressing massage.
- Preset airbags pressure in 3 levels of intensity.
- Manual inflatable and venting adjust air pressing.
- 192 acupuncture nodes create reflexology.
- Adjustable finger pressing speeds in 3 levels.
- 24 infrared lights enhances blood circulation
- Time settings are 10, 15 (auto) and 20 minutes
FEATURE
4 Airbags
24 Infrared
Lights
192 Acupuncture Nodes
Venting Inflatable
Finger pressing
Air Pressing
OPERATION
1. After you turn on the Power Switch located on
the bottom of the massager, you’ ll hear the
“beep” sound once.
2. Power On/Off
Press the “On/Off” button once to initiate the
device and it will get into standby mode with
automatic preset timer of 15 minutes showed
on the LED panel.
3. Speed
Press “Speed” button to choose 3 different
speeds (Slow/Medium/Fast) showed on LED
panel.
This foot massager applies acupuncture
technology with acupuncture nodes
combined with air pressure massaging
and infrared heated air to improve blood
circulation.
INTRODUCTION
Please turn on the Power Switch located on the
bottom of the foot massager after plugging in the
power cord.
Please turn off the Power Switch located on the
bottom of the foot massager after plugging in the
power cord or when it is not in use for long time.
NOTICE
4. Timer
Press “Timer” button to choose 3 presets
operation timers (10/15/20) minutes showed
on LED panel.
5. Pressure
Press “Pressure” button to choose 3 preset
levels of air pressing (Weak/Medium/Strong)
showed on LED panel.
Technical Tips:
after press the "Pressure"
button, you will hear the gear sound, then press
the "Inflatable" button to adjust the pressure,
and the gear sound will be gone.
6. Inflatable
Press “Inflatable” button repeatedly until
reaching the pressure level you want.
7. Venting
Press “Venting” button repeatedly to release
air pressure until reaching your desired level.
8. Heat
Press “Heat” button to turn on or turn off the
heat function showed on LED panel.
9. Press the “On/Off” button to turn on or turn off
the device.
Turn off the Power Switch located on the
bottom of foot massager to stop operation.
Specifications Voltage:
AC100-240V/50-60Hz
DC24V 2 A
Power: 48W
Weight: 6Kgs
Andere Emoka Massagegerät Handbücher
