EMP-Centauri MS13/13+32EEU-14 Bedienungsanleitung
Instruction Manual
MS13/13+32EEU-14
MS13/13+40EEU-14
MS13/13+52ECU-13
MS13/13+60ECU-13
Dear Customer,
congratulations on the purchase of the EMP-Centauri product. Before its installation and putting into
operation, read carefully the entire operation manual. Keep the purchase and rework if any) records for
future need.
1) Field of Application, Warranty
The product is designed for the distribution of satellite & terrestrial including cable) TV and radio signals. Its
main purpose is to allow connecting of multiple user to the common antenna SMATV).
The manufacturer provides for E.LITE CLASS products extended 4 four) years warranty from the date of
purchase, see details in EMP-Centauri’s General trade conditions, published at manufacturer’s website
www.emp-centauri.cz.
It is prohibited to dismantle the product and make any interventions in it. Repairs or any interventions in the
product may be performed only by EMP-Centauri company, or other companies authorized by EMP-
Centauri.
2) Technical Specifications
Products are cascadable multiswitches for distribution of terrestrial and satellite signals from 3 satellite
positions 12 polarities) to up to 60 users, depending on model. Satellite trunk lines are active and exhibit
small gain. Terrestrial trunk line is passive.
Terrestrial band can be switched passive / active for all user’s outputs. The insertion loss in satellite band is
sloped to compensate increasing loss of coaxial cables.
The multiswitch is DC supplied from connected satellite receivers, DC2.1 socket for external power 12V is
connected to all satellite inputs. DC pass is provided through the TERR line.
Specification MS13/13+32
EEU 14
MS13/13+40
EEU 14
MS13/13+52
EEU 13
MS13/13+60
EEU 13
Number of Trunk Lines 13 12 x SAT, 1 x TERR)
Number of User Outputs 32 40 52 60
Frequency Range SAT 950–2150 MHz, TERR 40–840 MHz
Insertion Loss – User Outputs* SAT 5–0 dB, TERR 0 / 30 dB SAT 8–0 dB, TERR 5 / 32 dB
Insertion Loss – Trunk Lines* SAT 1 dB gain, TERR 4 dB
Isolation – User Outputs min) 20 dB
Isolation – Trunk Lines min) 25 dB
Maximum Input level** SAT 100 dBuV, TERR 100 dBuV active, 110 dBuV passive
1 of 4
Specification MS13/13+32
EEU 14
MS13/13+40
EEU 14
MS13/13+52
EEU 13
MS13/13+60
EEU 13
Max. Level at User Outputs** SAT 100 dBuV, TERR 95 dBuV
Current drawn 70 mA per user output)
Dimensions w,d,h) 37.5 x 35.0 x 6.5 cm 37.5 x 45.0 x 6.5 cm
Temperature Range −25 – +50 °C
Notes: * average values; SAT: range of loss from low to high frequencies, TERR: switchable active / passive
** according to EN 50083-3/35dB IMA3 SAT), EN 50083-3/60dB IMA3 TERR)
3) Product Takeover
Make sure that the product is not damaged and following accessories are enclosed:
•power supply 12V
•75 Ω loads for the impedance matching of unused outputs 12 pcs for 32 & 40 outputs models,
20 pcs for 52 & 60 outputs models)
•plastic mounting foots for 35 mm DIN rail 3 pcs)
In the case of damage or missing accessories please contact your dealer.
4) Product Storing and Installation
We recommend the device to be installed and serviced by the qualified technician.
The product must not be stored and installed:
•in the place with excessive humidity
•in the place with dropping or splashing water,
•in the place with excessive dust pollution, mechanical vibrations or impacts
•in the place out of temperature limits specified in the section 2) Technical Specifications
•close to heat sources radiators or air ventilators, direct sunshine etc.)
•in the reach of children
Use the apparatus only in moderate climates not in tropical climate).
Fix the product firmly on a wall or another hard and inflammable surface with screws and dowels. The
product shall be in no case held only by the connected cables.
Further instructions:
•ensure the free space at least 10 cm around the product for the sufficient air circulation
•do not cover the product with curtains etc.)
•do not place any containers with liquids vases, glasses etc.) or naked flame sources lighted
candle etc.) on the product or near the product
5) Product Connection
Connect the product in accordance with this manual and valid regulation in you country. Use high quality 75 Ω
coaxial cable designed for satellite reception. The coaxial cables shall not be broken, the minimum bending
radius should be 5 cm. Mount the F connectors screw, crimp or compress type) on the ends of coaxial cables
.
Connect the F connectors into the F sockets of product and fasten them with an appropriate force.
•Connect input F sockets marked “A” – “D”, “TERR” with outputs of preceding device in the
2 of 4
cascade LNB/antenna, amplifier, cascadable multiswitch)
•Connect output F sockets marked “A” – “D”, “TERR” with inputs of following device in the cascade
cascadable multiswitch, amplifier) or with 75 Ohm terminators DC-blocked)
•Connect output F sockets marked “1”, “2”, “3”… with wall sockets or receivers or terminate them
with 75 ohm terminators*
•Connect connector marked with protective earth symbol with protective bonding conductor
•Connect DC2.1 socket marked “DC 12V” with power supply
* Termination is not required if terrestrial reception is not used.
6) Product Settings
Turn the knob “ACTIVE PASSIVE” to switch between active and passive mode of terrestrial band.
Each connected satellite receiver must be properly set up to have access to all connected LNBs. Follow
instruction manual for satellite receiver or TV set. The most common styles of setup are shown in the table:
SAT SYSTEM LNB) Setting style 1 Setting style 2 Setting style 3
A DiSEqC 1.0: 1 of 4 DiSEqC 1.0: A committed: AA
B DiSEqC 1.0: 2 of 4 DiSEqC 1.0: B committed: AB
C DiSEqC 1.0: 3 of 4 DiSEqC 1.0: C committed: BA
7) Safety
Due to security reasons the product and wiring in which the product is connected, must be grounded
properly. Use the terminal identified with the appropriate symbol to ground the product. Make sure the
antennas are properly protected against lightning.
The product should be disconnected from the wiring immediately if it gets into contact with liquids dropping
water, spilled drinks etc.).
8) Product Maintenance
The maintenance operation is especially cleansing of the product. Use only dry cloth to clean the product
and do not use any liquid agents.
Coaxial cables installed outdoors should be replaced once in a few years. Unscrew all F connectors and
clean connector contacts, resp. shorten the coaxial cable by approx. 2 cm, every 2 years.
9) Symbols Explanation
Certificate of conformity Protective earth
According to EU directive, electric and electronic devices which are identified by one of the
following symbols must not be disposed of together with municipal waste. When disposing
of the old device, use local waste collection and separation systems.
3 of 4
10) Wiring Example
More wiring examples are shown at the manufacturer’s website.
4 of 4
11) Contact
Manufacturer: EMP-Centauri s.r.o.
5. kvetna 690
339 01 Klatovy 4
Czech Republic
tel: +420) 376 323 813 sales)
tel: +420) 376 323 853 tech. support)
www.emp-centauri.cz
TERR ANTENNA
LNB
(QUATTRO)
LNB
(QUATTRO)
LNB
(QUATTRO)
MS13/13+40EEU 14 PA12
13x cable
MS13/13+40EEU 14
13x cable
MS13/13+40EEU 14
13x DC blocked load 75 Ω
PA12
PA12
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere EMP-Centauri Schalten Handbücher
EMP-Centauri
EMP-Centauri MS9/4PIU-5 Bedienungsanleitung
EMP-Centauri
EMP-Centauri MS5/16NEU-12 Bedienungsanleitung
EMP-Centauri
EMP-Centauri S?16/1?PCP-W3 Bedienungsanleitung
EMP-Centauri
EMP-Centauri S2/1PCN-W1 Bedienungsanleitung
EMP-Centauri
EMP-Centauri MS17/17+6ECP-4 Bedienungsanleitung
EMP-Centauri
EMP-Centauri MS9/4EIP-8 Bedienungsanleitung
EMP-Centauri
EMP-Centauri S16/4PCN-W3 Bedienungsanleitung
EMP-Centauri
EMP-Centauri MS13/13+6ECP-4 Bedienungsanleitung
EMP-Centauri
EMP-Centauri MS17/17+6ECU-4 Bedienungsanleitung
EMP-Centauri
EMP-Centauri P.162-IW Bedienungsanleitung
EMP-Centauri
EMP-Centauri MS9/6ECP-4 Bedienungsanleitung
EMP-Centauri
EMP-Centauri OMS5/10 Bedienungsanleitung
EMP-Centauri
EMP-Centauri S16/1PCP-W3 Bedienungsanleitung
EMP-Centauri
EMP-Centauri P.144-A-5 Bedienungsanleitung
EMP-Centauri
EMP-Centauri MS5/5+12ECP5dB-4 Bedienungsanleitung
EMP-Centauri
EMP-Centauri P.169-TW Bedienungsanleitung
EMP-Centauri
EMP-Centauri MS5/6NEU-4 Bedienungsanleitung
EMP-Centauri
EMP-Centauri MS9/9+6ECU-4 Bedienungsanleitung
EMP-Centauri
EMP-Centauri S4/1PCT-W2 Bedienungsanleitung
EMP-Centauri
EMP-Centauri T1/1+1ENP8dB-1 Bedienungsanleitung
