Empower CDS326 Bedienungsanleitung

24V MAX CORDLESS MOUSE SANDER

MODEL: CDS326

Instruction Manual

TABLE OF CONTENTS

WARNING! Read and understand all instructions. Failure to follow all instructions

listed below may result in serious personal injury.

WARNING! When using electric tools, machines or equipment, basic safety

pre

cautions should always be followed to reduce the risk of fire, electric shock, and

per

sonal injury. Completely read the manual before proceeding to use this tool. KEEP

THESE INSTRUCTIONS.

IMPORTANT SAFETY INSTRUCTIONS.............................................................. p.2

SAFETY INSTRUCTIONS FOR CORDLESS SANDER....................................... p.5

SPECIFICATIONS................................................................................................ p.8

FUNCTIONAL DESCRIPTION............................................................................. p.9

ASSEMBLY........................................................................................................... p.9

OPERATION......................................................................................................... p.10

CLEANING, MAINTENANCE, AND LUBRICATION............................................. p.13

PARTS LIST.......................................................................................................... p.14

SCHEMATIC DRAWING ...................................................................................... p.15

CALIFORNIA PROP 65

WARNING: Some dust created by power sanding, sawing, grinding, drilling and

other constuction activities contains chemicals known to the state of California

to cause cancer, birth defects or other reproductive harm. Some examples of these

chemicals are:

●Lead from lead-based paints.

●Crystalline silica from bricks and cement and other masonry products, and arsenic

and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work.

To reduce your exposure to these chemicals, work in a well ventilated area with approved

safety equipment, such as those dust masks that are specially designed to filter out

microscopic particles.

For more information go to www.P65WARNINGs.ca.gov.

WARRANTY ......................................................................................................... p.16

IMPORTANT SAFETY INSTRUCTIONS

WORK AREA

Keep your work area clean and well lit. Cluttered benches and dark

areas invite accidents.

Do not operate power tools in explosive atmospheres, such as in

the presence of flammable liquids, gases, or dust. Power tools

create sparks which may ignite the dust or fumes.

Keep bystanders, children, and visitors away while operating a

power tool.

Distractions can cause you to lose control. Protect others in the

work area from debris such as chips and sparks. Provide barriers or

shields as needed.

ELECTRICAL SAFETY

Double insulated tools are equipped with a polarized plug. This

power plug will fit in a polarized outlet only one way. If the plug does

not fit fully in the outlet, reverse the plug. If it still does not fit,

contact a qualified electrician to install a polarized outlet. Do not

change the plug in any way. Double Insulation eliminates the

need for the three-wire grounded power cord and grounded power

supply system.

Avoid body contact with grounded surfaces such as pipes,

radiators, ranges, and refrigerators. There is an increased risk of

electric shock if your body is grounded.

Do not expose power tools to rain or wet conditions. Water entering

a power tool will increase the risk of electric shock.

Handle the cord carefully. Never use the cord to carry the tools or

pull the plug from an outlet. Keep cord away from heat, oil, sharp

edges, or moving parts. Replace damaged cords immediately.

Damaged cords increase the risk of electric shock.

When operating a power tool outside, use outdoor extensions cord

marked “W-A” or “W”. These cords are rated for outdoor use and

reduce the risk of electric shock.

IMPORTANT SAFETY INSTRUCTIONS

PERSONAL SAFETY

▪Stay alert, watch what you are doing, and use common sense when

operating a power tool. Do not use tool while tired or under the

influence of drugs, alcohol, or medication. A moment of inattention

while operating power tools may result in serious personal injury.

▪Dress properly. Do not wear loose clothing or jewelry. Pull long hair

up and back. Keep your hair, clothing, and gloves away from

moving parts. Loose clothes, jewelry, or long hair can be caught in

moving parts.

▪Avoid accidental starting. Be sure switch is off before plugging in.

Carrying tools with your finger on the switch or plugging in tools

with the switch on invites accidents.

▪Remove adjusting keys before turning the tool on. A wrench or a

key that is left attached to a rotating part of the tool may result in

personal injury.

▪Do not overreach. Always keep proper footing and balance.

Proper footing and balance enables better control of the tool in

unexpected situations.

▪Use safety equipment. Always wear eye protection. Dust mask,

non- skid safety shoes, hard hat, or hearing protection must be

used for appropriate conditions.

POWER TOOL USE AND CARE

▪Use clamps or other practical way to secure and support the work

piece to a stable platform. Holding the work by hand or against your

body is unstable and may lead to loss of control.

▪Do not force tool. Use the correct tool for your application. The

correct tool will do the job better and safer at the rate for which it is

designed.

▪Do not use tool if switch does not turn it on or off. Any tool that

cannot be controlled with the switch is dangerous and must be

repaired.

IMPORTANT SAFETY INSTRUCTIONS

▪Disconnect the plug from the power source before making any

adjustments, changing accessories, or storing the tool. Such

preventive safety measures reduce the risk of starting the tool

accidentally.

▪Store idle tools out of reach of children and other untrained

users. Tools are dangerous in the hands of untrained users.

▪Maintain tools with care. Keep accessories sharp and clean.

Properly maintained tools with sharp cutting edges are less likely to

bind and are easier to control. Do not use a damaged tool. Tag

damaged tools “Do Not Use” until repaired.

▪Check for misalignment or binding of moving parts, breakage of

parts, and any other condition that may affect the tool’s operation. If

damaged, have the tool serviced before using. Many accidents are

caused by poorly maintained tools.

▪Use only accessories that are recommended by the manufacturer

for your model. Accessories that may be suitable for one tool may

become hazardous when used on another tool.

BATTERY TOOL USE AND CARE

▪Ensure the switch is in the off position before inserting the battery

pack. Inserting the battery pack into power tools that have the

switch on may cause an accident.

▪Recharge only with the charger specified by the manufacturer. A

charger that is suitable for one type of battery pack may create a

risk of fire when used with another battery pack.

▪Use power tools only with specifically designed battery packs. Use

of any other battery packs may create a risk of injury or fire.

▪When battery pack is not in use, keep it away from other metal

objects like paper clips, coins, keys, nails, screws, or other small

metal objects that can make a connection from one terminal to

another. Shorting the terminals together may cause burns or a fire.

a. Do not use the tool in wet or damp conditions.

b. Always keep the work area free of tripping hazards.

c. When using the tool, always ensure you are wearing protective

IMPORTANT SAFETY INSTRUCTIONS

safety equipment including safety glasses/goggles, ear protection,

dust mask and other protective clothing including gloves and apron.

▪Under abusive conditions, liquid may be ejected from the battery;

avoid contact. If contact accidentally occurs, flush with water. If

liquid contacts eyes, additionally seek medical help. Liquid ejected

from the battery may cause irritation or burns.

SERVICE

▪Tool service must be performed only by qualified repair personnel.

Service or maintenance performed by unqualified personnel could

result in a risk of injury.

▪When servicing a tool, use only identical replacement parts. Follow

instructions in the Maintenance section of this manual. Use of

unauthorized parts or failure to follow maintenance instructions may

create a risk of electric shock or injury.

SAFETY INSTRUCTIONS FOR CORDLESS SANDER

▪This power tool is intended to function as a sander. Read all safety

warnings, instructions, illustrations, and specifications provided with

this power tool. Failure to follow all instructions listed below may

result in electric shock, fire, and/or serious injury.

▪Operations such as grinding, wire brushing, polishing, or cutting- off

are not recommended to be performed with this power tool.

Operations for which the power tool was not designed may create a

hazard and cause personal injury.

▪Do not use accessories which are not specifically designed

and recommended by the tool manufacturer. Just because the

accessory can be attached to your power tool, it does not assure

safe operation.

▪The rated speed of the accessory must be at least equal to the

maximum speed marked on the power tool. Accessories running

SAFETY INSTRUCTIONS FOR CORDLESS SANDER

faster than their RATED SPEED can break and fly apart.

▪The outside diameter and the thickness of your accessory must

be within the capacity rating of your power tool. Incorrectly sized

accessories cannot be adequately guarded or controlled.

▪The arbor size of wheels, flanges, backing pads or any other

accessory must properly fit the spindle of the power tool.

Accessories with arbor holes that do not match the mounting

hardware of the power tool will run out of balance, vibrate

excessively, and may cause loss of control.

▪Do not use a damaged accessory. Before each use inspect the

accessory such as abrasive wheels for chips and cracks, backing

pad for cracks, tear or excess wear, wire brush for loose or cracked

wires. if power tool or accessory is dropped, inspect for damage or

install an undamaged accessory. After inspecting and installing

an accessory, position yourself and bystanders away from the

plane of the rotating accessory and run the power tool at

maximum no-load speed for one minute. Damaged accessories will

normally break apart during this test time.

▪Wear personal protective equipment. Depending on application,

use face shield, safety goggles or safety glasses. as appropriate,

wear dust mask, hearing protectors, gloves, and workshop apron

capable of stopping small abrasive or workpiece fragments. the eye

protection must be capable of stopping flying debris generated by

various operations. The eye protection must be capable of stopping

flying debris generated by various operations. The dust mask or

respirator must be capable of filtering out particles generated by

your operation. Prolonged exposure to high intensity noise may

cause hearing loss.

▪Keep bystanders a safe distance away from work area. anyone

entering the work area must wear personal protective equipment.

Fragments of workpiece or of a broken accessory may fly away and

cause injury beyond immediate area of operation.

▪Hold power tool by insulated gripping surfaces only when

performing an operation where the accessorymay contact hidden

SAFETY INSTRUCTIONS FOR CORDLESSSANDER

wiring or its own cord. An accessory contacting a ″live″ wire may

make exposed metal parts of the power tool ″live″ and shock the

operator.

▪Never lay the power tool down until the accessory has come to a

complete stop. The spinning accessory may grab the surface and

pull the power tool out of your control.

▪Do not run the power tool while carrying it at your side. Accidental

contact with the spinning accessory could snag your clothing,

pulling the accessory into your body.

▪Regularly clean the power tool’s air vents. The motor’s fan will

draw the dust inside the housing and excessive accumulation of

powdered metal may cause electrical hazards.

▪Do not operate the power tool near flammable materials. Sparks

could ignite these materials.

▪Do not use accessories that require liquid coolants. Using water or

other liquid coolants may result in electrocution or shock.

▪Maintain labels and nameplates on the tool. These carry

important safety information.

▪Avoid unintentional starting. Prepare to begin work before turning

on the tool.

▪Do not depress the spindle lock when starting or during operation.

▪Do not leave the tool unattended when the Battery Pack is

connected. Turn off the tool and remove the Battery Pack before

leaving.

▪Use clamps (not included) or other practical ways to secure and

support the workpiece to a stable platform. Holding the work by

hand or against your body is unstable and may lead to loss of

control and personal injury.

▪The battery charger gets hot during use. The charger’s heat can

build up to unsafe levels and create a fire hazard if it does not

receive adequate ventilation, due to an electrical fault, or if it is used

in a hot environment. Do not place the charger on a flammable

surface. Do not obstruct any vents on the charger. Especially

avoid placing the charger on carpets and rugs; they are not only

SAFETY INSTRUCTIONS FOR CORDLESS SANDER

flammable, but they also obstruct vents under the charger.

▪This product is not a toy. Keep it out of reach of children.

▪People with pacemakers should consult their physician(s) before

use. Electromagnetic fields in close proximity to heart pacemaker

could cause pacemaker interference or pacemaker failure.

▪In addition, people with pacemakers should:

▪Avoid operating alone.

▪Do not use with power switch locked on.

▪Properly maintain and inspect to avoid electrical shock.

▪Properly ground power cord. Ground Fault Circuit Interrupter

▪(GFCI) should also be implemented–as it prevents sustained

electrical shock.

▪The warnings, precautions, and instructions discussed in this

instruction manual cannot cover all possible conditions and

situations that may occur. It must be understood by the operator

that common sense and caution are factors which cannot be built

into this product but must be supplied by the operator.

SPECIFICATIONS

Voltage: 24V Max

NO Load Speed: 11000RPM

Pad Size: 5-1/2"x5-1/2"x3-1/8"

Switch Type: Dust Resistant

Battery Type: Li-ion

Charging Time: 1-2Hours

Includes:

1 pc 24V Cordless mouse sander

1 pc 24V Lithium-ion battery(2000mAh)

1 pc Charger

1 pc Dust collection box

10 pcs Sanding paper

1 pc Instruction manual

FUNCTIONAL DESCRIPTION

A. Battery lock button

B. 24V Lithium-ion battery

C. Dust collection box

D. Backing pad

E. Switch

ASSEMBLY

▪Slide the Dust Box onto the Dust Chute at the back of the Sander.

Push the Dust Box fully onto the Dust Chute using firm pressure

until the Locking Tabs snap into place in the Tab Slots.

▪The collection of the dust will only work if the sandpaper has holes

that line up with the 5 dust collection holes in the Backing Pad.

There are 4 other holes in the Backing Pad for the Screws that

attach the Backing Pad to the Sander.

Inhaltsverzeichnis

Andere Empower Sander Handbücher

Empower

Empower COS326 Bedienungsanleitung

Beliebte Sander Handbücher anderer Marken

Oliver

Oliver 6305 Bedienungsanleitung

Jet

Jet 22-44 Pro-3 Service-Handbuch

Makita

Makita M9204 Handbuch

Makita

Makita M9204 Bedienungsanleitung

Craftsman

Craftsman 351.215131 Bedienungsanleitung

Clarke

Clarke Woodworker CBS1-5B Bedienungsanleitung

Chicago Pneumatic

Chicago Pneumatic CP9778 Bedienungsanleitung

Nitto Kohki

Nitto Kohki BB-20 Bedienungsanleitung

Ferm

Ferm FEOS-135 Bedienungsanleitung

Unior

Unior 1510 Bedienungsanleitung

stayer

stayer ls1200 Bedienungsanleitung

Jet

Jet JSG-96 Service-Handbuch

Parkside

Parkside PDS 290 B2 Bedienungsanleitung

Status

Status XPA Series Bedienungsanleitung

Clarke

Clarke EZ Sand Bedienungsanleitung

Craftsman

Craftsman 113.22521 Bedienungsanleitung

Craftsman

Craftsman 113.225831 Bedienungsanleitung

CLAS

CLAS OP 1429 Bedienungsanleitung