GPS lock times — Upon rst use, make sure your accessory
has a clear view of the sky (it is recommended to go outside).
As your UltiMate GPS has no satellite data available when used
for the rst time, the accessory will need to search for satellites
without having any prior knowledge of where satellites are in
the sky. This process can take anywhere from 35 seconds up to
several minutes, depending on your location, surroundings and
sky conditions. Under normal regular use, lock times will typically
be below 30 seconds for clear and open sky conditions.
AGPS data upload — Uploading AGPS data to your accessory
enables faster satellite lock times, typically below 15 seconds for
clear and open sky conditions. AGPS data can be uploaded from
the Hardware tab in the UltiMate GPS App. AGPS data upload is
optional but recommended, especially before rst use.
Charging and syncing — When your UltiMate GPS is connected
to your iPod and your computer with the included USB cable,
you may charge and sync your iPod as usual.
Power consumption — Just like any other GPS receiver, your
UltiMate GPS accessory consumes power from your iPod and
as such can impact battery life. It is therefore recommended
that you completely close any location-based applications that
you are no longer using. Alternatively, you can connect your
accessory to a wall/car charger whenever available.
Troubleshooting — If you have trouble getting started, try this:
Unplug the USB cable from the accessory, then plug your
accessory into your iPod. Verify that the LED power icon on
the accessory ashes orange twice, then lights solid orange. If
not, unplug your accessory, reboot your iPod and try again.
If your accessory is successfully recognized by your iPod but
not by the UltiMate GPS App, unplug the USB cable from the
accessory and the accessory from your iPod. Quit the
UltiMate GPS App by clicking the Home Button on your iPod.
Next, double-click the Home Button on your iPod and when
the task bar appears at the bottom of the screen, locate the
UltiMate GPS App icon (scroll right if needed). Tap and hold
the UltiMate GPS App icon until a red minus sign appears in
its upper left corner. Tap the red minus sign to fully close the
UltiMate GPS App. Click the Home Button once more, then
restart the UltiMate GPS App. Next plug in your accessory.
Please contact technical support if your problem persists.
Questions and support — For support, detailed user manuals,
frequently asked questions, drivers and product updates, visit us
online at www.emprum.com or email support@emprum.com.
•
•
•
20120509-1
