Encore Networks EN-2000 Bedienungsanleitung

For information on trademarks, safety, limitations

of liability, and similar topics, see

http://www.encorenetworks.com/disclaimer.htm.

Configuring Traffic Priority for the

EN-2000

he EN-2000 provides wireless and cabled connections to a local area network

(LAN), to a wide area network (WAN), and to peripheral devices and remote

devices. This document discusses Quality of Service (QoS) settings for traffic priority

on the EN-2000.

When you log onto the EN-2000 management system, the EN-2000 Status Overview

Screen is displayed (Figure 4-1).

Figure 4-1. EN-2000 Status Overview Screen

On the screen, select the Network tab. Then select the Advanced tab, then the QoS

tab. The Quality of Service Configuration Screen is displayed (Figure 4-2).

EN-2000™ Reference Manual

Document 4

Version A, October 2017

Page 4-2 EN-2000™ Reference Manual, Document 4

Figure 4-2. Quality of Service Configuration Screen

Quality of Service is generally configured on the EN-2000’s WAN port or on its

cellular port. (If the EN-2000 is using connection failover, configure QoS on both

those ports. QoS settings may differ for the ports.)

Use the following guidelines to configure Quality of Service for the EN-2000’s

network traffic.

Note: Consult your network administrator for specific values for the parameters.

1For each port that will use traffic shaping, do the following:

aSelect the checkbox to Enable the Quality of Service feature.

bLeave the setting for Classification Group at default.

cSelect the checkbox to Calculate Overhead.

dLeave the checkbox for Half-Duplex unchecked.

eSet the rates for Download Speed and Upload Speed (in kbps). Consult

your network administrator for the download and upload speeds that each

connection uses.

Configuring Traffic Priority for the EN-2000 Page 4-3

Note: In the Classification Rules table (at the bottom of the screen), the

rows listed for Target traffic shaping are priority traffic, normal traffic,

and express traffic.

2Do the following:

aSelect the Add button (below the left column of the table).

❖The table displays another row (for low traffic).

bAt the end of the row for express traffic, under the column for Sort, select

(the “up” arrow), so that the rows for Target traffic shaping are listed in the

order shown below.

•priority traffic

•express traffic

•normal traffic

•low traffic

3In the table’s row for priority traffic, do the following:

aUnder the column Number of Bytes (near the end of the row), enter the

packet size for the application (in bytes).

bIf the default value for any other field in the row needs to be adjusted, select

the arrow to the right of that field, and do one of the following:

iSelect the field’s new value,

ii Select custom and type the field’s new value.

4In each row for another type of traffic (express, normal, and low), perform

the actions in step 3aand step 3b.

5After values for all the fields on the Quality of Service Configuration Screen

have been addressed, do one of the following:

aIf you wish to save the configuration and use it immediately, select Save and

Apply.

bIf you wish to save the configuration, for use after the EN-2000 is restarted

(but not for immediate use), select Save.

cIf you wish to discard the configuration, select Reset.

Page 4-4 EN-2000™ Reference Manual, Document 4

Andere Handbücher für EN-2000

Inhaltsverzeichnis

Andere Encore Networks Netzwerk-Router Handbücher

Encore Networks

Encore Networks EN-4000 Bedienungsanleitung

Encore Networks

Encore Networks EN-4000 Bedienungsanleitung

Encore Networks

Encore Networks VSR-1200 Bedienungsanleitung

Encore Networks

Encore Networks EN-1000 Bedienungsanleitung

Encore Networks

Encore Networks EN-4000 Bedienungsanleitung

Encore Networks

Encore Networks EN-2000 Bedienungsanleitung

Encore Networks

Encore Networks EN-2000 Bedienungsanleitung

Encore Networks

Encore Networks EN-4000 Bedienungsanleitung

Encore Networks

Encore Networks EN-2000 Bedienungsanleitung

Encore Networks

Encore Networks EN-2000 Bedienungsanleitung

Encore Networks

Encore Networks EN-1000 Bedienungsanleitung

Encore Networks

Encore Networks EN-2000 Bedienungsanleitung

Encore Networks

Encore Networks EN-4000 Bedienungsanleitung

Encore Networks

Encore Networks EN-4000 Bedienungsanleitung

Encore Networks

Encore Networks EN-1000 Series Bedienungsanleitung

Encore Networks

Encore Networks EN-2000 Bedienungsanleitung

Encore Networks

Encore Networks VSR-30 Bedienungsanleitung

Encore Networks

Encore Networks EN-2000 Bedienungs- und Montageanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise