Endress+Hauser Micropilot FMR51 Bedienungsanleitung

Products Solutions Services

Operating Instructions

Micropilot FMR51, FMR52

FOUNDATION Fieldbus

Level radar

Level measurement in liquids

BA01121F/00/EN/01.13

71219971

Valid as of version

01.01.zz

Important document information Micropilot FMR51, FMR52 FOUNDATION Fieldbus

2 Endress+Hauser

1 Important document information

1.1 Document function

These Operating Instructions contain all the information that is required in various phases

of the life cycle of the device: from product identification, incoming acceptance and

storage, to mounting, connection, operation and commissioning through to

troubleshooting, maintenance and disposal.

1.2 Document conventions

1.2.1 Safety symbols

Symbol Meaning

DANGER

A0011189-EN

DANGER!

This symbol alerts you to a dangerous situation. Failure to avoid this situation will result in

serious or fatal injury.

WARNING

A0011190-EN

WARNING!

This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in

serious or fatal injury.

CAUTION

A0011191-EN

CAUTION!

This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in

minor or medium injury.

NOTICE

A0011192-EN

NOTICE!

This symbol contains information on procedures and other facts which do not result in

personal injury.

1.2.2 Electrical symbols

Symbol Meaning

A0011197

Direct current

A terminal to which DC voltage is applied or through which direct current flows.

A0011198

Alternating current

A terminal to which alternating voltage is applied or through which alternating current flows.

A0017381

Direct current and alternating current

• A terminal to which alternating voltage or DC voltage is applied.

• A terminal through which alternating current or direct current flows.

A0011200

Ground connection

A grounded terminal which, as far as the operator is concerned, is grounded via a grounding

system.

A0011199

Protective ground connection

A terminal which must be connected to ground prior to establishing any other connections.

A0011201

Equipotential connection

A connection that has to be connected to the plant grounding system: This may be a potential

equalization line or a star grounding system depending on national or company codes of practice.

Micropilot FMR51, FMR52 FOUNDATION Fieldbus Important document information

Endress+Hauser 3

1.2.3 Tool symbols

Symbol Meaning

A0013442

Torx screwdriver

A0011220

Flat blade screwdriver

A0011219

Cross-head screwdriver

A0011221

Allen key

A0011222

Hexagon wrench

1.2.4 Symbols for certain types of information

Symbol Meaning

A0011182

Allowed

Indicates procedures, processes or actions that are allowed.

A0011183

Preferred

Indicates procedures, processes or actions that are preferred.

A0011184

Forbidden

Indicates procedures, processes or actions that are forbidden.

A0011193

Tip

Indicates additional information.

A0011194

Reference to documentation

Refers to the corresponding device documentation.

A0011195

Reference to page

Refers to the corresponding page number.

A0011196

Reference to graphic

Refers to the corresponding graphic number and page number.

,…

Series of steps

Result of a sequence of actions

A0013562

Help in the event of a problem

1.2.5 Symbols in graphics

Symbol Meaning

1, 2, 3 ... Item numbers

,…

Series of steps

A, B, C, ... Views

A-A, B-B, C-C, ... Sections

Important document information Micropilot FMR51, FMR52 FOUNDATION Fieldbus

4 Endress+Hauser

Symbol Meaning

A0011187

Hazardous area

Indicates a hazardous area.

A0011188

Safe area (non-hazardous area)

Indicates a non-hazardous location.

1.2.6 Symbols at the device

Symbol Meaning

Safety instructions

Observe the safety instructions contained in the associated Operating Instructions.

Temperature resistance of the connection cables

Specifies the minimum value of the temperature resistance of the connection cables.

1.3 Additional documentation

Document Purpose and content of the document

Technical Information

TI01040F (FMR51, FMR52)

Planning aid for your device

The document contains all the technical data on the device and provides

an overview of the accessories and other products that can be ordered for

the device.

Brief Operating Instructions

KA01125F (FMR51/FMR52,

FOUNDATION Fieldbus)

Guide that takes you quickly to the 1st measured value

The Brief Operating Instructions contain all the essential information

from incoming acceptance to initial commissioning.

Description of Device Parameters

GP01017F (FMR5x, FOUNDATION

Fieldbus)

Reference for your parameters

The document provides a detailed explanation of each individual

parameter in the operating menu. The description is aimed at those who

work with the device over the entire life cycle and perform specific

configurations.

The document types listed are available:

• On the CD supplied with the device

• In the Download Area of the Endress+Hauser Internet site: www.endress.com 

Download

1.3.1 Safety Instructions (XA)

Depending on the approval, the following Safety Instructions (XA) are supplied with the

device. They are an integral part of the Operating Instructions.

Feature 010 Approval Available for Safety Instructions HART Safety Instructions

PROFIBUS

FOUNDATION Fieldbus

BA ATEX: II 1 G Ex ia IIC T6 Ga • FMR51

• FMR52 XA00677F XA00685F

BB ATEX: II 1/2 G Ex ia IIC T6-T1 Ga/Gb • FMR51

• FMR52 XA00677F XA00685F

BC ATEX: II 1/2 G Ex d [ia] IIC T6-T1 Ga/Gb • FMR51

• FMR52

XA00680F XA00688F

BD ATEX: II 1/2/3 G Ex ic [ia Ga] IIC T6-T1 Ga/Gb/Gc • FMR51

• FMR52

XA00678F XA00686F

BG ATEX: II 3 G Ex nA IIC T6-T1 Gc • FMR51

• FMR52 XA00679F XA00687F

Micropilot FMR51, FMR52 FOUNDATION Fieldbus Important document information

Endress+Hauser 5

Feature 010 Approval Available for Safety Instructions HART Safety Instructions

PROFIBUS

FOUNDATION Fieldbus

BH ATEX: II 3 G Ex ic IIC T6-T1 Gc • FMR51

• FMR52 XA00679F XA00687F

BL ATEX: II 1/2/3 G Ex nA [ia Ga] IIC T6-T1 Ga/Gb/Gc • FMR51

• FMR52

XA00678F XA00686F

B2 ATEX: II 1/2 G Ex ia IIC T6-T1 Ga/Gb

ATEX: II 1/2 D Ex ia IIIC Txx°C Da/Db

• FMR51

• FMR52

XA00683F XA00691F

B3 ATEX: II 1/2 G Ex d [ia] IIC T6-T1 Ga/Gb

ATEX: II 1/2 D Ex ta IIIC Txx°C Da/Db

• FMR51

• FMR52

XA00684F XA00692F

B4 ATEX:II 1/2 G Ex ia IIC T6-T1 Ga/Gb

ATEX: II 1/2 G Ex d [ia] IIC T6-T1 Ga/Gb

• FMR51

• FMR52

XA00681F XA00689F

IA IECEx: Ex ia IIC T6-T1 Ga • FMR51

• FMR52 XA00677F XA00685F

IB IECEx: Ex ia IIC T6-T1 Ga/Gb • FMR51

• FMR52 XA00677F XA00685F

IC IECEx: Ex d [ia] IIC T6-T1 Ga/Gb • FMR51

• FMR52

XA00680F XA00688F

ID IECEx: Ex ic [ia Ga] IIC T6-T1 Ga/Gb/Gc • FMR51

• FMR52

XA00678F XA00686F

IG IECEx: Ex nA IIC T6-T1 Gc • FMR51

• FMR52 XA00679F XA00687F

IH IECEx: Ex ic IIC T6-T1 Gc • FMR51

• FMR52 XA00679F XA00687F

IL IECEx: Ex nA [ia Ga] IIC T6-T1 Ga/Gb/Gc • FMR51

• FMR52

XA00678F XA00686F

I2 IECEx: Ex ia IIC T6-T1 Ga/Gb

IECEx: Ex ia IIIC Txx°C Da/Db

• FMR51

• FMR52

XA00683F XA00691F

I3 IECEx: Ex d [ia] IIC T6-T1 Ga/Gb

IEXEx: Ex ta IIIC Txx°C Da/Db

• FMR51

• FMR52

XA00684F XA00692F

I4 IECEx: Ex ia IIC T6-T1 Ga/Gb

IECEx: Ex d [ia] IIC T6-T1 Ga/Gb

• FMR51

• FMR52

XA00681F XA00689F

For certified devices the relevant Safety Instructions (XA) are indicated on the

nameplate.

If the device is prepared for the remote display FHX50 (product structure: feature 030:

Display, Operation", option L or M), the Ex marking of some certificates changes according

to the following table 1):

Feature 010 ("Approval") Feature 030 ("Display, Operation") Ex marking

BE L oder M ATEX II 1D Ex ta [ia] IIIC T500 xx°C Da

BF L oder M ATEX II 1/2 D Ex ta [ia Db] IIIC Txx°C Da/Db

BG L oder M ATEX II 3G Ex nA [ia Ga] IIC T6 Gc

BH L oder M ATEX II 3G Ex ic [ia Ga] IIC T6 Gc

B3 L oder M ATEX II 1/2G Ex d [ia] IIC T6 Ga/Gb,

ATEX II 1/2D Ex ta [ia Db] IIIC Txx°C Da/Db

IE L oder M IECEx Ex ta [ia] IIIC T500 xx°C Da

IF L oder M IECEx ta [ia Db] IIIC Txx°C Da/Db

IG L oder M IECEx Ex nA [ia Ga] IIC T6 Gc

1) The marking of certificates not mentioned in this table are not affected by the FHX50.

Important document information Micropilot FMR51, FMR52 FOUNDATION Fieldbus

6 Endress+Hauser

Feature 010 ("Approval") Feature 030 ("Display, Operation") Ex marking

IH L oder M IECEx Ex ic [ia Ga] IIC T6 Gc

I3 L oder M IECEx Ex d [ia] IIC T6 Ga/Gb,

IECEx Ex ta [ia Db] IIIC Txx°C Da/Db

Micropilot FMR51, FMR52 FOUNDATION Fieldbus Basic safety instructions

Endress+Hauser 7

2 Basic safety instructions

2.1 Requirements for the personnel

The personnel for installation, commissioning, diagnostics and maintenance must fulfill

the following requirements:

‣Trained, qualified specialists must have a relevant qualification for this specific function

and task

‣Are authorized by the plant owner/operator

‣Are familiar with federal/national regulations

‣Before beginning work, the specialist staff must have read and understood the

instructions in the Operating Instructions and supplementary documentation as well as

in the certificates (depending on the application)

‣Following instructions and basic conditions

The operating personnel must fulfill the following requirements:

‣Being instructed and authorized according to the requirements of the task by the

facility's owner-operator

‣Following the instructions in these Operating Instructions

2.2 Designated use

Application and measured materials

The measuring device described in these Operating Instructions is intended for the

continuous, contactless level measurement of liquids, pastes and sludge. The device can

also be freely mounted outside closed metal vessels because of its operating frequency of

about 26 GHz, a maximum radiated pulsed power of 5.7 mW and an average power output

of 0.015 mW (for the version with advanced dynamics: maximum pulse power: 23.3 mW;

average power: 0.076 mW). Operation is completely harmless to humans and animals.

Observing the limit values specified in the "Technical data" and listed in the Operating

Instructions and supplementary documentation, the measuring device may be used for the

following measurements only:

‣Measured process variables: level, distance, signal strength

‣Calculated process variables: Volume or mass in arbitrarily shaped vessels; flow

through measuring weirs or flumes (calculated from the level by the linearization

functionality)

To ensure that the measuring device remains in proper condition for the operation time:

‣Use the measuring device only for measured materials against which the process-

wetted materials are adequately resistant.

‣Observe the limit values in "Technical data".

Incorrect use

The manufacturer is not liable for damage caused by improper or non-designated use.

Verification for borderline cases:

‣For special measured materials and cleaning agents, Endress+Hauser is glad to provide

assistance in verifying the corrosion resistance of wetted materials, but does not accept

any warranty or liability.

Residual risk

The electronics housing and its built-in components such as display module, main

electronics module and I/O electronics module may heat to 80 °C (176 °F) during operation

through heat transfer from the process as well as power dissipation within the electronics.

During operation the sensor may assume a temperature near the temperature of the

measured material.

Basic safety instructions Micropilot FMR51, FMR52 FOUNDATION Fieldbus

8 Endress+Hauser

Danger of burns due to heated surfaces!

‣For high process temperatures: Install protection against contact in order to prevent

burns.

2.3 Workplace safety

For work on and with the device:

‣Wear the required personal protective equipment according to federal/national

regulations.

2.4 Operational safety

Risk of injury.

‣Operate the device in proper technical condition and fail-safe condition only.

‣The operator is responsible for interference-free operation of the device.

Conversions to the device

Unauthorized modifications to the device are not permitted and can lead to unforeseeable

dangers.

‣If, despite this, modifications are required, consult with the manufacturer.

Repair

To ensure continued operational safety and reliability,

‣Carry out repairs on the device only if they are expressly permitted.

‣Observe federal/national regulations pertaining to repair of an electrical device.

‣Use original spare parts and accessories from the manufacturer only.

Hazardous area

To eliminate a danger for persons or for the facility when the device is used in the

hazardous area (e.g. explosion protection, pressure vessel safety):

‣Based on the nameplate, check whether the ordered device is permitted for the

intended use in the hazardous area.

‣Observe the specifications in the separate supplementary documentation that is an

integral part of these Instructions.

2.5 Product safety

This measuring device is designed in accordance with good engineering practice to meet

state-of-the-art safety requirements, has been tested, and left the factory in a condition in

which they are safe to operate.

It meets general safety standards and legal requirements. It also complies with the EC

directives listed in the device-specific EC Declaration of Conformity. Endress+Hauser

confirms this by affixing the CE mark to the device.

Micropilot FMR51, FMR52 FOUNDATION Fieldbus Product description

Endress+Hauser 9

3 Product description

3.1 Product design

3.1.1 Micropilot FMR51

3 3 3

A0016818

 1 Design of the Micropilot FMR51 (26 GHz)

1 Electronics housing

2 Process connection (Thread)

3 Horn antenna

4 Flange

5 Antenna extension

3.1.2 Micropilot FMR52

1 1 1

2 3 5

A0016788

 2 Design of the Micropilot FMR52 (26 GHz)

1 Electronics housing

2 Tri-Clamp process connection

3 Dairy coupling

4 PTFE cladding

5 Flange

Product description Micropilot FMR51, FMR52 FOUNDATION Fieldbus

10 Endress+Hauser

3.1.3 Electronics housing

Esc

–+E

123

A0012422

 3 Design of the electronics housing

1 Electronics compartment cover

2 Display module

3 Main electronics module

4 Cable glands (1 or 2, depending on instrument version)

5 Nameplate

6 I/O electronics module

7 Terminals (pluggable spring terminals)

8 Connection compartment cover

9 Grounding terminal

3.2 Registered trademarks

FOUNDATIONTM Fieldbus

Registered trademark of the Fieldbus Foundation, Austin, Texas, USA

KALREZ®, VITON®

Registered trademark of DuPont Performance Elastomers L.L.C., Wilmington, USA

TEFLON®

Registered trademark of E.I. DuPont de Nemours & Co., Wilmington, USA

TRI CLAMP®

Registered trademark of Alfa Laval Inc., Kenosha, USA

Andere Handbücher für Micropilot FMR51

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Endress+Hauser Radar Handbücher

Endress+Hauser

Endress+Hauser Micropilot FMR63B Bedienungsanleitung

Endress+Hauser

Endress+Hauser Levelflex M FMP41C Bedienungsanleitung

Endress+Hauser

Endress+Hauser Levelflex FMP51 Handbuch

Endress+Hauser

Endress+Hauser Micropilot FMR67B Technische Daten

Endress+Hauser

Endress+Hauser Levelflex FMP56 Bedienungsanleitung

Endress+Hauser

Endress+Hauser levelflex M FMP 40 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Micropilot FMR67B Bedienungsanleitung

Endress+Hauser

Endress+Hauser Levelflex FMP51 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Levelflex FMP55 Technische Daten

Endress+Hauser

Endress+Hauser Micropilot FMR60 Gebrauchsanweisung

Endress+Hauser

Endress+Hauser Micropilot FMR62B Technische Daten

Endress+Hauser

Endress+Hauser Micropilot M FMR230 Bedienungsanleitung

Endress+Hauser

Endress+Hauser FOUNDATION Fieldbus Micropilot FMR51 Technische Daten

Endress+Hauser

Endress+Hauser Micropilot FMR60 Handbuch

Endress+Hauser

Endress+Hauser Micropilot FMR66B PROFINET with Ethernet-APL Handbuch

Endress+Hauser

Endress+Hauser Levelflex FMP51 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Micropilot M FMR245 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Micropilot M FMR245 Bedienungsanleitung

Endress+Hauser

Endress+Hauser micropilot M FMR 230 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Micropilot FMR62B PROFINET with Ethernet-APL Handbuch

Endress+Hauser

Endress+Hauser Levelflex FMP55 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Levelflex FMP50 Montageanleitung

Endress+Hauser

Endress+Hauser Levelflex M FMP45 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Levelflex FMP53 Bedienungsanleitung

Beliebte Radar Handbücher anderer Marken

SAW D2L

SAW D2L Valentine One Gen2 Bedienungsanleitung

Raymarine

Raymarine Raytheon R20X Bedienungsanleitung

Simrad

Simrad CA34 Bedienungsanleitung

ECHOMAX

ECHOMAX Active-X-Band Bedienungsanleitung

AGD

AGD 340 Bedienungsanleitung

Kustom Signals

Kustom Signals Eagle 3 Bedienungsanleitung

SYMEO

SYMEO STU Bedienungsanleitung

Axis

Axis D2110-VE Bedienungsanleitung

MALA

MALA MIRA Bedienungsanleitung

Emerson

Emerson ROSEMOUNT 5300 Bedienungsanleitung

Rosemount

Rosemount 5300 Series Bedienungsanleitung

TERMA

TERMA SCANTER 5102 Bedienungsanleitung

GSSI

GSSI UtilityScan Bedienungsanleitung

Acconeer

Acconeer A111 Bedienungsanleitung

Crosley

Crosley CR37 Bedienungsanleitung

AGD

AGD 318 Bedienungsanleitung

Cobra

Cobra SLR 650G Bedienungsanleitung

Faselase

Faselase D10 Bedienungsanleitung