Endress+Hauser Liquiphant FTL31 Bedienungsanleitung

Products Solutions Services

Operating Instructions

Liquiphant FTL31 IO-Link

Point level switch for liquids

BA01935F/00/EN/03.20

71521626

2020-10-05

Liquiphant FTL31 IO-Link

2 Endress+Hauser

Order code:

Ext. ord. cd.:

Ser. no.:

www.endress.com/deviceviewer Endress+Hauser

Operations App

XXXXXXXXXXXX

XXXXX-XXXXXX

XXX.XXXX.XX

Serial number

A0023555

Liquiphant FTL31 IO-Link Table of contents

Endress+Hauser 3

Table of contents

1 About this document ........... 4

1.1 Document function ................... 4

1.2 Symbols ............................ 4

1.3 Documentation ...................... 5

1.4 Registered trademarks ................ 6

2 Basic safety instructions ....... 6

2.1 Requirements for the personnel ........ 6

2.2 Designated use ...................... 6

2.3 Workplace safety .................... 7

2.4 Operational safety ................... 7

2.5 Product safety ....................... 7

3 Product description ............. 7

3.1 Product design ....................... 8

4 Incoming acceptance and

product identification .......... 9

4.1 Incoming acceptance ................. 9

4.2 Product identification ................. 9

4.3 Manufacturer address ................ 9

4.4 Storage and transport ................. 9

5 Installation .................... 10

5.1 Mounting conditions ................ 10

5.2 Mounting the measuring device ....... 15

5.3 Post-installation check ............... 17

6 Electrical connection .......... 18

6.1 Connection conditions ............... 18

6.2 Supply voltage ...................... 18

6.3 Connecting the device ............... 19

6.4 Post-connection check ............... 20

7 Operation options ............. 21

7.1 Operation with operating menu ....... 21

8 Overview of the operating

menu .......................... 22

9 System integration ........... 23

9.1 Process data ....................... 23

9.2 Reading out and writing device data

(ISDU – Indexed Service Data Unit) .... 24

10 Commissioning ................ 28

10.1 Function check ..................... 28

10.2 Commissioning the local display ....... 29

10.3 Function test with test magnet ........ 31

10.4 Commissioning with an operating

menu ............................. 31

11 Customer-specific IO-Link

settings ........................ 32

11.1 Configuring a customer-specific switch

point with configuration of a switching

delay and switchback delay: .......... 32

12 Diagnostics and

troubleshooting ............... 33

12.1 General troubleshooting ............. 33

12.2 Diagnostic information via LED

indicator .......................... 33

12.3 Diagnostic events ................... 34

12.4 Overview of diagnostic events ......... 36

12.5 Behavior of the device in the event of a

fault .............................. 37

12.6 Resetting to factory settings (reset) .... 38

13 Maintenance .................. 38

13.1 Cleaning ........................... 38

14 Repair .......................... 38

14.1 Return ............................ 38

14.2 Disposal ........................... 39

15 Description of device

parameters .................... 39

15.1 Diagnosis .......................... 39

15.2 Parameter ......................... 41

15.3 Observation ....................... 49

16 Accessories .................... 50

17 Technical data ................. 50

17.1 Power supply ....................... 50

17.2 Environment ....................... 50

17.3 Process ............................ 52

About this document Liquiphant FTL31 IO-Link

4 Endress+Hauser

1 About this document

1.1 Document function

These Operating Instructions contain all the information that is required in various phases of

the life cycle of the device: from product identification, incoming acceptance and storage, to

mounting, connection, operation and commissioning through to troubleshooting,

maintenance and disposal.

1.2 Symbols

1.2.1 Safety symbols

CAUTION

This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in

minor or medium injury.

DANGER

This symbol alerts you to a dangerous situation. Failure to avoid this situation will result in

serious or fatal injury.

NOTICE

This symbol contains information on procedures and other facts which do not result in

personal injury.

WARNING

This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in

serious or fatal injury.

1.2.2 Tool symbols

Open-ended wrench

1.2.3 Symbols for certain types of information

Permitted

Procedures, processes or actions that are permitted

Preferred

Procedures, processes or actions that are preferred

Forbidden

Procedures, processes or actions that are forbidden

Tip

Indicates additional information

Reference to documentation

Reference to page

Liquiphant FTL31 IO-Link About this document

Endress+Hauser 5

Notice or individual step to be observed

Series of steps

Result of a step

1.2.4 Symbols in graphics

1, 2, 3, ...

Item numbers

A, B, C, ...

Views

1.2.5 Communication-specific symbols

Light emitting diode is off

Light emitting diode is on

Light emitting diode is flashing

1.2.6 Symbols on the device

Safety instructions

Observe the safety instructions contained in the associated Operating Instructions

Temperature resistance of the connection cables

Specifies the minimum value of the temperature resistance of the connection cables

1.3 Documentation

The following types of documentation are available in the Download Area of the Endress

+Hauser website (www.endress.com/downloads):

For an overview of the scope of the associated Technical Documentation, refer to the

following:

•W@M Device Viewer (www.endress.com/deviceviewer): Enter the serial number from

nameplate

•Endress+Hauser Operations App: Enter the serial number from the nameplate or scan

the 2D matrix code (QR code) on the nameplate

1.3.1 Technical Information (TI): planning aid for your device

The document contains all the technical data on the device and provides an overview of the

accessories and other products that can be ordered for the device.

Basic safety instructions Liquiphant FTL31 IO-Link

6 Endress+Hauser

1.3.2 Supplementary documentation

•TI00426F

Weld-in adapters, process adapters and flanges (overview)

•SD01622P

Installation instructions for weld-in adapter G 1", G ¾"

•BA00361F

Installation instructions for weld-in adapter M24x1.5

1.4 Registered trademarks

is a registered trademark of the IO-Link Consortium.

2 Basic safety instructions

2.1 Requirements for the personnel

The personnel must fulfill the following requirements to carry out the necessary tasks, e. g.,

commissioning and maintenance:

‣Trained, qualified specialists must have a relevant qualification for the specific function

and task

‣Are authorized by the plant owner/operator

‣Are familiar with federal/national regulations

‣Must have read and understood the instructions in the manual and supplementary

documentation

‣Follow instructions and comply with conditions

2.2 Designated use

The measuring device described in this manual may be used only as a point level switch for

liquids. Incorrect use may pose a hazard. To ensure that the measuring device remains in

perfect condition during the operating time:

• Measuring devices must be used only for media to which the process-wetted materials have

an adequate level of resistance.

• Comply with the limit values in the "Technical data" section.

2.2.1 Incorrect use

The manufacturer is not liable for damage caused by improper or non-designated use.

Residual risks

Due to heat transfer from the process, the temperature of the electronics housing and the

assemblies contained therein may rise to 80 °C (176 °F) during operation.

Liquiphant FTL31 IO-Link Product description

Endress+Hauser 7

Danger of burns from contact with surfaces!

‣In the event of elevated medium temperatures, ensure protection against contact to

prevent burns.

2.3 Workplace safety

For work on and with the device:

‣Wear the required protective equipment according to federal/national regulations.

2.4 Operational safety

Risk of injury!

‣Operate the device only if it is in proper technical condition, free from errors and faults.

‣The operator is responsible for interference-free operation of the device.

2.5 Product safety

This measuring device is designed in accordance with good engineering practice to meet state-

of-the-art safety requirements, has been tested, and left the factory in a condition in which it

is safe to operate.

It meets general safety standards and legal requirements. It also complies with the EU

directives listed in the device-specific EU Declaration of Conformity. Endress+Hauser confirms

this by affixing the CE mark to the device.

3 Product description

The Liquiphant FTL31 is a point level switch for universal use in all liquids. It is used

preferably in storage tanks, mixing vessels and pipes.

Product description Liquiphant FTL31 IO-Link

8 Endress+Hauser

3.1 Product design

The point level switch is available in different versions, which can be combined in accordance

with user specifications.

A0022228

 1 Examples of variants

Versions Examples

A B

Electrical connection M12 plug M12 plug

Housing (sensor design)

for process temperatures up to: 150 °C (302 °F) 150 °C (302 °F)

Sensor type Compact version Short tube version

More detailed information and documentation are available:

• Product Configurator on the Endress+Hauser website www.endress.com

• Endress+Hauser sales organization www.addresses.endress.com

Liquiphant FTL31 IO-Link Incoming acceptance and product identification

Endress+Hauser 9

4 Incoming acceptance and product identification

4.1 Incoming acceptance

Check the following during incoming acceptance:

 Are the order codes on the delivery note and the product sticker identical?

 Are the goods undamaged?

 Do the nameplate data match the ordering information on the delivery note?

 If required (see nameplate): Are the safety instructions (XA) provided?

If one of these conditions is not met, please contact the manufacturer's sales office.

4.2 Product identification

The following options are available for the identification of the measuring device:

• Nameplate specifications

• Extended order code with breakdown of the device features on the delivery note

‣Enter the serial number from the nameplates into W@M Device Viewer

(www.endress.com/deviceviewer)

 All the information about the measuring device and the scope of the associated

Technical Documentation are displayed.

‣Enter the serial number from the nameplate into the Endress+Hauser Operations App or

use the Endress+Hauser Operations App to scan the 2-D matrix code (QR Code) provided on

the nameplate

 All the information about the measuring device and the scope of the associated

Technical Documentation are displayed.

4.3 Manufacturer address

Endress+Hauser SE+Co. KG

Hauptstraße 1

79689 Maulburg, Germany

Place of manufacture: See nameplate.

4.4 Storage and transport

4.4.1 Storage conditions

• Permitted storage temperature: –40 to +85 °C (–40 to +185 °F)

• Use original packaging.

4.4.2 Transporting the product to the measuring point

Transport the device to the measuring point in the original packaging.

Installation Liquiphant FTL31 IO-Link

10 Endress+Hauser

4.4.3 Handling of the device

NOTICE

Risk of injury! Housing or fork may become damaged or tear!

‣Transport the device to the measuring point in its original packaging or by the housing.

‣Do not hold the device by the fork!

‣Do not use the device as a ladder or climbing aid!

‣Do not bend the fork!

‣Do not shorten or lengthen the fork!

A0020845

 2 Handling of the device

5 Installation

5.1 Mounting conditions

5.1.1 Orientation

Installation is possible in any position in a vessel, pipe or tank.

Andere Handbücher für Liquiphant FTL31

Inhaltsverzeichnis

Andere Endress+Hauser Schalten Handbücher

Endress+Hauser

Endress+Hauser Liquipoint FTW 31 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Thermophant T TTR31 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Nivotester FTL 375 N 3 Series Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquiphant M FTL50 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquiphant T FTL20H Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquiphant M FTL50 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Nivotester FTL325N-1 1 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquipoint T FTW31 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Nivotester FTL325N-3 3 Series Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquiphant FTL51B Technische Daten

Endress+Hauser

Endress+Hauser Liquiphant FTL62 Technische Daten

Endress+Hauser

Endress+Hauser Liquiphant FTL41 Technische Daten

Endress+Hauser

Endress+Hauser FEC 22 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Nivotester FTL 375 N 3 Series Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquiphant FTL62 Bedienungsanleitung

Endress+Hauser

Endress+Hauser IO-Link Ceraphant PTC31B Bedienungsanleitung

Endress+Hauser

Endress+Hauser nivotester FTC 420 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquiphant M FTL51 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Nivotester FTC325 PFM Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquiphant FTL51B Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquiphant M FTL50 Montageanleitung

Endress+Hauser

Endress+Hauser Nivotester FTC625 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquiphant FTL33 IO-Link Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquiphant S FTL70 7 Series Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung