Endress+Hauser Thermophant T TTR 31 Bedienungsanleitung

KA174R/09/en/10.04

51008032

Release 01.00.00

Operating manual

Thermophant T TTR 31, TTR 35

Temperature switch

Thermophant T

2 Endress+Hauser

Table of contents

1 Safety instructions. . . . . . . . . . . 3

1. 1 Designated use . . . . . . . . . . . . . . . . . . . . . . 3

1. 2 Installation, commissioning and operation . . 3

1. 3 Operational safety . . . . . . . . . . . . . . . . . . . . 3

1. 4 Return . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2 Device identification . . . . . . . . . 4

2. 1 Nameplate . . . . . . . . . . . . . . . . . . . . . . . . . 4

3 Installation . . . . . . . . . . . . . . . . 5

3. 1 Incoming acceptance, storage . . . . . . . . . . . 5

3. 2 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . 5

3. 3 Process connection . . . . . . . . . . . . . . . . . . . 6

3. 4 Installation instructions . . . . . . . . . . . . . . . 7

4 Wiring . . . . . . . . . . . . . . . . . . . . 8

4. 1 DC voltage version with M12 connector . . . 8

4. 2 DC voltage version with valve connector . . 8

5 Operation . . . . . . . . . . . . . . . . . 9

5. 1 On-site operation . . . . . . . . . . . . . . . . . . . . 9

5. 2 Operation with PC and Readwin® 2000 . 16

6 Accessories . . . . . . . . . . . . . . . 18

6. 1 Adapter concept for TTR 35 . . . . . . . . . . . 18

6. 2 Welding bosses and coupling . . . . . . . . . 20

6. 3 Electrical connection . . . . . . . . . . . . . . . . 21

6. 4 Configuration kit . . . . . . . . . . . . . . . . . . . 22

7 Trouble-shooting. . . . . . . . . . . 23

7. 1 Errors and warnings . . . . . . . . . . . . . . . . 23

7. 2 Spare parts . . . . . . . . . . . . . . . . . . . . . . . . 24

7. 3 Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

7. 4 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . 24

7. 5 Change status (release) . . . . . . . . . . . . . . . 24

7. 6 Release history . . . . . . . . . . . . . . . . . . . . 24

8 The most important

technical data . . . . . . . . . . . . . 25

8. 1 Power supply . . . . . . . . . . . . . . . . . . . . . . 25

8. 2 Output . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

8. 3 Operating conditions . . . . . . . . . . . . . . . . 25

9 Dangerous good sheet . . . . . . .27

Thermophant T Safety instructions

Endress+Hauser 3

1 Safety instructions

1. 1 Designated use

The Thermophant T is a temperature switch for monitoring, displaying and regulating process

temperatures. The device has been safely built with state-of-the-art technology and meets the

applicable requirements and EC Directives. It can, however, be a source of danger if used incor-

rectly or for anything other than the designated use.

1. 2 Installation, commissioning and operation

Installation, electrical connection, commissioning, operation and maintenance of the measuring

system must be carried out by trained, qualified specialists authorised to perform such work by

the facility's owner-operator. The specialist must have read and understood these Operating In-

structions and must follow the instructions they contain. The device may only be modified and

repair work carried out if this is explicitly permitted in the Operating Instructions. Damaged de-

vices which could be a source of danger may not be commissioned and must be labelled and

identified as defective.

1. 3 Operational safety

• Functional safety

The Thermophant T temperature switches were developed according to the standards IEC

61508 and IEC 61511-1 (FDIS). The device version with PNP switch output and additional

analog output is equipped with fault detection and fault prevention facilities within the elec-

tronics and software. This device version can therefore be used to monitor temperature up to

SIL 2 (Safety Integrity Level).

• Ex-area

The Thermophant T is not approved for use in Ex-areas.

1. 4 Return

The following procedures must be carried out before a device is returned to Endress+Hauser:

• Always enclose a fully completed “Declaration of Contamination” form with the device. Only

then can Endress+Hauser transport and examine a returned device. A copy of the “Declara-

tion of Contamination” can be found on the second last page of these Operating Instructions.

• Remove all fluid residues. This is particularly important if the fluid is hazardous to health, e.g.

flammable, toxic, caustic, carcinogenic, etc.

Warning!

Do not return a measuring device if you are not absolutely certain that all traces of hazardous

substances have been removed, e.g. substances which have penetrated crevices or diffused

through plastic.

Device identification Thermophant T

4Endress+Hauser

2 Device identification

2. 1 Nameplate

To identify your device, compare the complete order code and the version information on the

delivery papers with the data on the nameplate.

T09-TTR31xxx-18-xx-xx-xx-000

Fig. 1: Nameplate for device identification (as example)

Note!

• The release number indicates the change status of the device. A change in the last two figures

does not have any affect on the compatibility - see also →Chap. 7.

mOrder code rConnection diagram

nSerial number sMeasuring range

oTAG number tAmbient temperature

pRelease number (change status) uDegree of protection

qConnection values vApprovals

Thermophant T Installation

Endress+Hauser 5

3 Installation

3. 1 Incoming acceptance, storage

• Incoming acceptance:

Check the packaging and the device for damage. Check that the goods delivered are complete

and nothing is missing.

• Storage:

Storage temperature −40 °C to +85 °C.

3. 2 Dimensions

T09-TTR31xxx-06-xx-xx-xx-000

Fig. 2: Dimensions in mm

Version L in 100 and 200 mm, version L* = 50 mm with reduced sensor tip

M 12x1.5 connector as per IEC 60947-5-2

M 16x1.5 or ½ NPT valve plug as per DIN 43650A/ISO 4400

Installation Thermophant T

6Endress+Hauser

3. 3 Process connection

The following table illustrates the versions of Thermophant T.

TTR 31 TTR 35

T09-TTR31xxx-17-xx-xx-xx-000

Field of applica-

tion

Monitoring, display and control of process temperatures Monitoring, display and con-

trol of process temperatures

in hygienic processes

Process connec-

tion

Item A

Version without proc-

ess connection (’w’).

Suitable welding

bosses and coupling

(see Section 6)

Item B

Version with thread

process connection

ANSI ¼" NPT

(m= AF14) and

½" NPT (m= AF27)

Item C

Version with thread

process connection

G ¼A (n= AF14) and

G ½A (n= AF27) as

per ISO 228

Item D

Adapter concept - version

with M24x1.5 thread for

adapters with process con-

nection for hygienic processes

(see Section 6.1.2)

Sensor length L Version L in 100 and 200 mm, version L = 50 mm only with reduced sensor tip

Measuring range -50 °C to +150 °C -50 °C to +150 °C

Thermophant T Installation

Endress+Hauser 7

3. 4 Installation instructions

T09-TTR31xxx-11-00-xx-xx-000

Fig. 3: Possible installation options for temperature monitoring in pipes

mTTR 31

nTTR 35 for use in hygienic processes

Mounting instructions:

• Installation at angle pieces, against the direction of flow (Fig. 3, Item A)

• Installation in smaller pipes, inclined against the direction of flow (Fig. 3, Item B)

• Installation vertical to the direction of flow (Fig. 3, Item C)

• The on-site display can be rotated electronically 180° −see Section 5. 1 "On-site operation"

• The housing can be rotated up to 310°.

Wiring Thermophant T

8Endress+Hauser

4Wiring

4. 1 DC voltage version with M12 connector

P01-PTx3xxxx-04-xx-xx-xx-002

Fig. 4: Thermophant T with M12x1.5 connector

A1: 1x PNP switch output

A2: 2x PNP switch output

A3: PNP switch output with additional analog output

A3’: PNP switch output with additional analog output (PIN assignment with "DESINA" setting)

Note!

DESINA (→Chap. 5.1.3 Basic settings):

R2 = Diagnosis/break contact (more informations about DESINA see www.desina.de)

4. 2 DC voltage version with valve connector

P01-PTx3xxxx-04-xx-xx-xx-003

Fig. 5: Thermophant T with M 16x1.5 or ½ NPT valve plug

B: 1x PNP switch output

Thermophant T Operation

Endress+Hauser 9

5 Operation

5. 1 On-site operation

The Thermophant T is operated by means of three keys. The digital display and the light emitting

diodes (LED) support navigation in the operating menu.

T09-TTR31xxx-19-xx-xx-en-001

Fig. 6: Position of operating elements and possibilities for display

Background illumination of the digital display:

– White = OK status

– Red = error status

Operation Thermophant T

10 Endress+Hauser

5.1.1 Navigating in the operating menu

T09-TTR31xxx-19-xx-xx-xx-002

Fig. 7: Navigating in the operating menu

A Function group selection

B Function selection

m Enter the operating menu

– Press the E key for longer than 3 s

n Select the "Function group" with the + or −key

o Select the "Function" with the E key

p Enter or change parameters with the + or −key

– Then return to "Function" with the E key Note: If software locking is enabled, it must be disabled before

making entries or changes

q Press the E key several times to return to the "Function group"

r Jump back to the measuring position (Home position)

– Press the E key for longer than 3 s

s Query to save data (select "YES" or "NO" with the + or − key)

–ConfirmwiththeEkey

Note!

Changes to the parameter settings only become effective if you choose s 'YES' when asked to

save data.

Andere Handbücher für Thermophant T TTR 31

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Endress+Hauser Schalten Handbücher

Endress+Hauser

Endress+Hauser Liquiphant M FTL50 Montageanleitung

Endress+Hauser

Endress+Hauser Soliphant M FTM52 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Nivotester FTC625 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquipoint T FTW32 Bedienungsanleitung

Endress+Hauser

Endress+Hauser FEC 22 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Solicap M FTI55 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Nivotester FTC325 PFM Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquiphant FTL33 IO-Link Bedienungsanleitung

Endress+Hauser

Endress+Hauser Nivotester FTW325 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Nivotester FTL 375 N 3 Series Bedienungsanleitung

Endress+Hauser

Endress+Hauser nivocompact FTC 831 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquiphant FTL33 IO-Link Technische Daten

Endress+Hauser

Endress+Hauser nivotester FTL 325 P Technische Daten

Endress+Hauser

Endress+Hauser Soliphant T FTM20 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquiphant S FTL70 Bedienungsanleitung

Endress+Hauser

Endress+Hauser nivotester FTL 325 P Handbuch

Endress+Hauser

Endress+Hauser Thermophant T TTR31 Bedienungsanleitung

Endress+Hauser

Endress+Hauser RTA421 Handbuch

Endress+Hauser

Endress+Hauser Cerabar PMP11 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cerabar M Bedienungsanleitung

Endress+Hauser

Endress+Hauser FTE30 Bedienungsanleitung

Endress+Hauser

Endress+Hauser nivocompact FTC 731 Bedienungsanleitung

Endress+Hauser

Endress+Hauser nivotester FTC 420 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquiphant FTL41 Technische Daten

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch