Eneo HDC-2080CS Bedienungsanleitung

User Manual

1/3” HDcctv Camera, WDR,

Day&Night, 1920x1080, C/CS,

12/24V

HDC-2080CS D

Safety Precaution

FULL-HD MEGA-PIXEL CAMERA

CAUTION: TO REDUCE THE RISK OF ELECTIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

To prevent fire or shock hazard, do not expose the unit to rain or moisture.

To prevent electric shocks and risk of fire hazards, do NOT use other than

specific power source.

Warning :

This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference when the equipment

is operated in a commercial environment. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at

his own expense.

Caution :

Any changes or modifications in construction of this device which are not expressly

approved by the party responsible for compliance could void the user's authority

to operate the equipment.

Mains power quality should be that of a typical commercial environment. If the user

of the model requires continued operation during power mains interruptions, it is

recommended that the model be powered from an uninterruptible power supply

(UPS) or a battery.

The symbol is intended to alert the user to the presence of important

operating and maintenance(servicing) instructions in the literature

accompanying the unit.

The symbol is intended to alert the user to the presence of uninsulated

"dangerous voltage" within the product's enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

FULL-HD MEGA-PIXEL CAMERA

Safety Precaution

NOTICE

The image used in this instruction manual are processed to help comprehension

and may differ from actual video of the camera.

Avoid installing areas where has shock or vibration which results in the problems.

Pay attention to safety when laying the connection cable and observe that the cable

is not subjected to heavy loads, kinks or damage and no moisture can get in.

Never open the device such as boards or lens.

The warranty becomes void if repairs are undertaken by unauthorized persons.

Maintenance and repair have to be carried out only by authorized service centers.

Use only a mild detergent to clean the housing.

The camera should never be operated beyond the technical specifications.

This can lead to destruction.

The camera should never be operated in water.

FULL-HD MEGA-PIXEL CAMERA

Contents

Safety Precaution

p.03~04

Contents

p.05

Features

p.06~07

Composition

p.07

Dimensions

p.07

Part Names

p.08

Installation Instructions

p.09~10

Operating Instructions

p.11~26

Specifications

p.27~28

FULL-HD MEGA-PIXEL CAMERA

Features

Key Features

• Full HD, 2Mega Pixel EX-SDI CAMERA, 1920x1080(30p/25p)

• Extended long reach HD Solution

• Real time True WDR(Wide Dynamic Range) / 30fps

• Improved noise figure with the enhanced 3DNR

• CS mount supported (Option: C-mount adaptor)

• Dual Filter Switcher

• Day & Night Simulation for easy focus adjustment

• Various Zooming Technologies

- Pointing Zoom (which enables the programmable zooming at any area)

- Preset Zoom

- Flex Zoom

- Smart Motion Zoom (Automatic zoom in/out when motion is detected)

• Motion Detection, Privacy Mask, Defog, Sens-up(~x32), D-WDR,

H/V/HV Flip, D-Zoom(~8x), Lens Shade Compensation, BLC/HLC,

Pixel Defect Compensation, Title Set

• EX-SDI or HD-SDI switchable

• Top performance at low light sensitivity (Sens-up On)

• OSD menu & CVBS Video output BNC for easy installation & maintenance.

• Circuit protection against faulty connection in power polarity

• Isolated power supply against ground loop problem

• Remote control via RS-485 (Pelco-D/P)

•Fine Back focus adjustment

FULL-HD MEGA-PIXEL CAMERA

(unit : mm)

General Description

• With ICR mechanism,

- Enhances its sensitivity about 10x at night time

- Can accepts the infrared light

• With Intelligent Focus Indicator and FOCUS ASSIST menu,

- Offers easy adjustment of Focus

- Eliminates the mistake of the erratic focus adjustment

• With 24VAC/12VDC dual power design,

- Offers the flexibility of installation

- Ensures the reliability

This camera realizes the natural and crisp image as you see the scene in front

of you by Full HD(1920x1080p) camera module.

Highly detailed pictures can be achieved and color reproducibility deserves

attention.

Composition

Features

Dimensions

Box Camera

Torque Wrench:

3mm (1pc)

Dust Protection

Cap (1pc)

Operating

Instruction

74 82

Ø35

FULL-HD MEGA-PIXEL CAMERA

Part Names

④

①OSD Control Joy stick

②Power input terminal

(AC24V/DC12V or DC12V)

③RS-485 / IR connector

④

HD-SDI/EX-SDI

output connector

⑤Power LED

⑥CVBS output connector

⑦Video format Switch

③

①

⑤

⑦

⑥

②

Torque

Wrench

Dust

Protection Cap

No.

DC Iris

Damp(-)

Damp(+)

Drive(+)

GND

Front Case

Rear Case

Back focus

adjustment

Mount Holes

(Top / Bottom)

SIDE VIEW

Lens Connector

for Auto Iris lenses

PIN 1PIN 3

PIN 2PIN 4

REAR VIEW

Installation Instructions

FULL-HD MEGA-PIXEL CAMERA

1. Remove the dust protection cap from the lens mount.

2. Screw the lens onto the camera firmly.

3. Plug the lens plug into the lens connector on the rear of camera case.

4. Mount the camera to the wall or ceilling with a corresponding mounting bracket

through the camera mount holes (1/4” thread insert) on its top or bottom.

CAUTION

Installation and commissioning Instructions

• Make sure the power is removed before the installation.

• Follow the order for applying power.

First connect the low voltage (DC12V or AC24V), then plug the AC adapter

to AC outlets to avoid an improper reset from power jitter and a damage from

the surge voltage when no load.

• Care should be taken the cable is NOT to be damaged, kinked or exposed in

the hazardous area.

• Do not expose the camera directly to a strong light source such as the sun or

spot light.

Setting the back focus adjustment

The proper back focus adjustment is essential for the motorized zoom lens to

get the all time sharp focus when zooming in and out by the remote control.

For easier and better adjustment, this camera provides FOCUS ASSIST menu

which prevents from the mistake of the focus adjustment.

With enabling FOCUS ASSIST menu, follow the procedure to get the best back

focus adjustment.

1. Set the lens for the zoom position to WIDE and the focus position to INFINITE(∞).

2. Shoot the object departing from about 10Meters.

3. Adjust ’Back focus adjustment with Torque wrench’ until the optimum focus

is achieved.

4. Set the lens for zoom position to TELE and adjust the lens focus for best focus.

5. Set the lens for zoom position to WIDE again, check if the focus adjustment

was the best. If not, re-adjust ‘Back focus adjustment’ slightly.

Start up

When the camera is powered properly, it starts up with initializing the internal

parameters.

Installation Instructions

FULL-HD MEGA-PIXEL CAMERA

Power Supply Connections

Make sure the power is removed before the installation.

Camera can work with either 24AC or 12VDC, dual voltage power .

Primary and secondary grounds are completely isolated to avoid the possible

ground-loop problems

In case that HD-SDI/EX-SDI Inputs are not supported in Monitor, please use

HD-SDI/EX-SDI Converter to connect HD-SDI/EX-SDI cable with Monitor

Some computer monitors or TVs may not support 30p/25p.

In this case, HD-SDI/EX-SDI DVR which can convert the frame rate to 60p/50p

is highly recommended.

Please check Specification of Monitor before installation.

Set the video format according to system,

EX-SDI or HD-SDI

DVR

350M+ via RG59u or 5C2V cable

350M+ via

RG59u or 5C2V

cable

350M+ via RG59u or 5C2V cable

1M~120M via RG59u or 5C2V cable

1M~120M

via

RG59u or

5C2V cable

1M~120M

via

RG59u or

5C2V cable

1M~120M

via

RG59u or

5C2V cable

DVR

(HD-SDI)

Camera

(HD-SDI)

Camera

(HD-SDI)

Camera

HDA-3000E HDA-3000E

HDA-3000E

DVR

(HD-SDI)

DVR

(HD-SDI)

Operating Instructions

FULL-HD MEGA-PIXEL CAMERA

Using OSD Controller

Setup menu can be accessed and controlled by OSD control joy stick on the rear

of the camera unit.

Five commands are available with the joy stick.

Description of the joystick operation

1) SET Key (●) : Access to the menu or enter the setting.

To enter the main menu, press the Set Key down for about 1.5sec

2) UP/DOWN Key (▲/▼) : Choose the desired sub-menu and to move

the cursor up or down.

3) LEFT/RIGHT Key (◄/►) : Set up the value of the selected menu.

Used to adjust the desired menu selection and to move the cursor left

or right.

4) denotes the long press down straightly for about 2 seconds

Description of D-ZOOM* adjustment

1) ▲: Zoom In

2) ▼ : Zoom Out

(*) Works only when OSD Menu is inactive.

Andere Handbücher für HDC-2080CS

Inhaltsverzeichnis

Andere Eneo IP-Kamera Handbücher

Eneo

Eneo VKC-1374/IR Bedienungsanleitung

Eneo

Eneo MSM-42F0037MPA Bedienungsanleitung

Eneo

Eneo MCB-72M2712M0A Bedienungsanleitung

Eneo

Eneo MEB-64V2812M0A Bedienungsanleitung

Eneo

Eneo NXC-1602M Bedienungsanleitung

Eneo

Eneo Minitrax HDD-1012PTZ1080 Montageanleitung

Eneo

Eneo MPC-52A0030P0A Bedienungsanleitung

Eneo

Eneo TVB-2080V2812IR Bedienungsanleitung

Eneo

Eneo MPC-54A0003M0A Bedienungsanleitung

Eneo

Eneo MCB-64A0003M0A Bedienungsanleitung

Eneo

Eneo 22X Bedienungsanleitung

Eneo

Eneo HDD-1080M2810IR D Bedienungsanleitung

Eneo

Eneo PXC-2080Z03 Bedienungsanleitung

Eneo

Eneo HDC-2080Z03 Bedienungsanleitung

Eneo

Eneo TVB-920F36IR Bedienungsanleitung

Eneo

Eneo HDC-2100M1080 Bedienungsanleitung

Eneo

Eneo HDB-2080M2810IR D Bedienungsanleitung

Eneo

Eneo GXC-1605M Bedienungsanleitung

Eneo

Eneo HDD-2080Z03IR D Bedienungsanleitung

Eneo

Eneo HDC-2080CS Bedienungsanleitung

Eneo

Eneo VKC-1416C Bedienungsanleitung

Beliebte IP-Kamera Handbücher anderer Marken

FLIR

FLIR Exx series Bedienungsanleitung

Avigilon

Avigilon H4A-BO1-IR Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWCA-C128-64 Bedienungsanleitung

ShareTech

ShareTech AV1 Bedienungsanleitung

Ezviz

Ezviz C6C Bedienungsanleitung

Melchioni

Melchioni UCAM 2015 Bedienungsanleitung

Geutebruck

Geutebruck G-Cam/ESD-4630 Bedienungsanleitung

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Bedienungsanleitung

Mitel

Mitel 6800i Series Service-Handbuch

Vitek

Vitek VTC-IR403-212NP Bedienungsanleitung

THOMSON

THOMSON DSC - 323W Bedienungsanleitung

AVer

AVer FB2027 Bedienungsanleitung

ENFORCER

ENFORCER EV-T5105-N2SQ Bedienungsanleitung

Wansview

Wansview NC543 Bedienungsanleitung

deView electronics

deView electronics CBDNI36F Bedienungsanleitung

Swann

Swann SwannEye Bedienungsanleitung

LevelOne

LevelOne IP CamSecure Bedienungsanleitung

Digitus

Digitus DN-16085-1 Bedienungsanleitung