Eneo APB-8SV2812MVA Bedienungsanleitung
Installation Guide
1/3” Camera, Day&Night, Eo-V,
2.8~12mm, 750TVL, WDR, Infrared, 12/24V, IP67
APB-8SV2812MVA
EN
Safety Precaution
03
ULTRA CLEAR RESOLUTION CAMERA
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
To prevent electric shocks and risk of fire hazards, do NOT use other than
specific power source.
The symbol is intended to alert the user to the presence of important
operating and maintenance(servicing) instructions in the literature
accompanying the unit.
The symbol is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
Warning :
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
Caution :
Any changes or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user's authority
to operate the equipment.
Mains power quality should be that of a typical commercial environment. If the user
of the model requires continued operation during power mains interruptions, it is
recommended that the model be powered from an uninterruptible power supply
(UPS) or a battery.
ULTRA CLEAR RESOLUTION CAMERA
Safety Precaution
04
NOTICE
The image used in this instruction manual are processed to help comprehension
and may differ from actual video of the camera.
Avoid installing areas where has shock or vibration which results in the problems.
Pay attention to safety when laying the connection cable and observe that the cable
is not subjected to heavy loads, kinks or damage and no moisture can get in.
Never open the device such as boards or lens.
The warranty becomes void if repairs are undertaken by unauthorized persons.
Maintenance and repair have to be carried out only by authorized service centers.
Use only a mild detergent to clean the housing.
The camera should never be operated beyond the technical specifications.
This can lead to destruction.
The camera should never be operated in water.
ULTRA CLEAR RESOLUTION CAMERA
Contents
05
Safety Precaution
p.03~04
Contents
p.05
Features
p.06~07
Composition
p.07
Dimensions
p.08
Part Names
p.09
Installation Instructions
p.10~11
Operating Instructions
p.12~31
Specifications
p.32
ULTRA CLEAR RESOLUTION CAMERA
Features
Key Features
06
• 1/3” High density Sony CCD (960H)
• 750TVL High-Resolution
• True WDR (Wide Dynamic Range)
• TDN with Dual Filter Switcher
• Built-in f=2.8~12mm F1.4 Mega-pixel, DC Auto Iris vari-focal lens
• Improved noise reduction 2D+3DNR
• Improved IR-Optimizer
• DIS(Digital Image Stabilizer), LSC (Lens shading compensation)
• Scene preset select, Motion detection, Polygon privacy mask(up to 15),
E-Zoom, Defog, Sens-up, BLC/HLC, Flickerless, Anti-CR, Flip
IR Shade compensation
• External Zoom & Focus adjustment
• IR-LED 70pcs
• LED ON/OFF Control
• Up the Coaxial (UTC) communication
• RS-485 control (Option)
• OSD MENU & Video Sub-out port for easy installation & maintenance
• Circuit protection against faulty connection in power polarity
• Isolated power supply against ground loop problem
• Dual Window, 3-Axis bracket
• IP67 protection
ULTRA CLEAR RESOLUTION CAMERA
General Description
• With ICR mechanism,
- Enhances its sensitivity about 10x at night time
- Can accepts the infrared light
This is an ultra-clear resolution camera which realizes over 750TVL resolution
and a crisp color reproduction with SONY 960H CCD and Effio-V Enhanced
image signal processor.
Features
07
Composition
Operating
Instruction
Camera
Mounting
Template
Torque Wrench:
3mm (1pc)
5mm (1pc)
Mounting Screw:
4 x 30mm (4pcs)
Plastic Anchor:
6 x 30mm (4pcs)
Video Sub-out
Cable (1pc)
• With Effio-V series Enhanced digital imaging system,
- Delivers the crystal clear images providing 750TVL resolution in conjunction
with SONY 960H High density CCD.
- They are provided ‘TRUE WDR’ function
- Color signal processing provides the optimum balance between the luminance
and chroma signals for high color reproducibility even for the detail scene
which contains very high spatial frequency.
- Incorporates 2D+3DNR signal processing.
Cable Signal
Sticker
Wiring Connector:
(1pc)
ULTRA CLEAR RESOLUTION CAMERA
08
Dimensions
(unit : mm)
Ø100
115
94
225
175
214
297
ULTRA CLEAR RESOLUTION CAMERA
Part Names
09
CAUTION
• Care should be taken the cable is NOT to be damaged, kinked or exposed
in the hazardous area.
• Do not expose the camera directly to a strong light source such as the sun
or spot light.
REAR
VIEW
FOCUS / ZOOM
adjusting Screws
DUAL WINDOW
SUN-SHIELD
SUN-SHIELD
FIXING BOLT
POWER
CABLE
FRONT CASE
OSD Setup
CONTROL COVER
BRACKET REAR CASE
ULTRA CLEAR RESOLUTION CAMERA
Installation Instructions
10
Torque Wrench (5mm)
Pan & Tilt adjustments
• Unlock the screw on the camera
bracket through using the torque
wrench(5mm) supplied.
• Set the camera’s viewing angle
then lock the screw on the bracket.
Tilt
Inclination
Pan
1. Locate the mounting template at the installation position and drill the wall.
Insert the anchors to the drilled holes
2. Place the bracket on pre-drilled position and fix it through using mounting
screws.
3. Route the Power cable to the connecting place.
Fix the camera bracket through using mounting screws (4x30mm).
4. Set the camera’s viewing angle and adjust zoom/focus of lens by using the
torque wrench.
Mounting Screw
: 4x30mm
1
Plastic Anchor
: 6 x 30mm
2
Inhaltsverzeichnis
Andere Eneo Sicherheitskamera Handbücher
Eneo
Eneo EDMC-142 Bedienungsanleitung
Eneo
Eneo HDC-2220M1080 Bedienungsanleitung
Eneo
Eneo APD-7SV2812MVA Bedienungsanleitung
Eneo
Eneo 232572 Bedienungsanleitung
Eneo
Eneo ICB-62M2713MAA Bedienungsanleitung
Eneo
Eneo IED-62F0036P0A Bedienungsanleitung
Eneo
Eneo IPC-53M2812M0A Bedienungsanleitung
Eneo
Eneo IPB-75M3610M0A Bedienungsanleitung
Eneo
Eneo VKCD-1321SFM/MF Bedienungsanleitung
Eneo
Eneo IEB-72M2812MCA Bedienungsanleitung
Eneo
Eneo 232569 Bedienungsanleitung
Eneo
Eneo VKC-1367IR-1850 Bedienungsanleitung
Eneo
Eneo PXB-080Z03B Bedienungsanleitung
Eneo
Eneo ICB-68M3611M5A Bedienungsanleitung
Eneo
Eneo IPD-68M3611P5A Bedienungsanleitung
Eneo
Eneo NXD-1602M Bedienungsanleitung
Eneo
Eneo IND-32F0016P0A Bedienungsanleitung
Eneo
Eneo IPC-53M2812M0A Bedienungsanleitung
Eneo
Eneo IED-62F0036M0A Bedienungsanleitung
Eneo
Eneo 219547 Bedienungsanleitung
