Energizer EZ40VTDE46N Bedienungsanleitung
©2018 Energizer. Energizer and certain graphic designs are trademarks of Energizer Brands,
LLC and related subsidiaries and are used under license by Builder SAS.
All other brand names are trademarks of their respective owners. Neither Builder SAS nor Energizer
Brands, LLC is affiliated with the respective owners of their trademarks.
Let's get started.
You're excited to power up, so we'll keep this brief!
SAFETY WARNINGS
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
Safe operating practices for lawnmowers
Training
a) Read the instructions carefully. Be familiar with the controls and the correct use of the machine.
b) Never allow children or people unfamiliar with these instructions to use the machine. Local regulations can restrict
the age of the operator.
c) Never operate the machine while people, especially children, or pets are nearby.
d) Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people or their
property.
Preparation
a) While operating the machine always wear substantial footwear and long trousers. Do not operate the machine when
barefoot or wearing open sandals. Avoid wearing clothing that is loose fitting or that has hanging cords or ties.
b) Thoroughly inspect the area where the machine is to be used and remove all objects which can be thrown by the
machine.
c) Before using, always visually inspect to see that the blade, blade bolt and the blade assembly are not worn or
damaged. Replace worn or damaged components in sets to preserve balance. Replace damaged or unreadable labels.
Operation
a) Operate the machine only in daylight or in good artificial light.
b) Avoid operating the machine in wet grass.
c) Always be sure of your footing on slopes.
d) Walk, never run.
e) Mow across the face of slopes, never up and down.
f) Exercise extreme caution when changing direction on slopes.
g) Do not mow excessively steep slopes.
h) Use extreme caution when reversing or pulling the machine towards you.
i) Stop the blade(s) if the machine has to be tilted for transportation when crossing surfaces other than grass, and when
transporting the machine to and from the area to be used.
j) Never operate the machine with defective guards or shields, or without safety devices, for example deflectors and/or
grass collector, in place.
k) Switch on the motor carefully according to instructions and with feet well away from the blade(s).
l) Do not tilt the machine when switching on the motor, except if the machine has to be tilted for starting. In this case, do
not tilt it more than absolutely necessary and lift only the part, which is away from the operator.
m) Do not start the machine when standing in front of the discharge opening.
n) Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times.
o) Do not transport the machine while the power source is running.
p) Stop the machine, and remove the battery. Make sure that all moving parts have come to a complete stop:
- whenever you leave the machine,
- before clearing blockages or unclogging chute,
- before checking, cleaning or working on the machine,
- after striking a foreign object.
Inspect the machine for damage and make repairs before restarting and operating the machine;
If the machine starts to vibrate abnormally (check immediately):
−inspect for damage,
−replace or repair any damaged parts,
−check for and tighten any loose parts.
Maintenance and storage
a) Keep all nuts, bolts and screws tight to be sure the machine is in safe working condition.
b) Check the grass collector frequently for wear or deterioration.
d) On machines with multi blade, take care as rotating one blade can cause other blades to rotate
e) Be careful during adjustment of the machine to prevent entrapment of the fingers between moving blades and fixed
parts of the machine.
Additional instructions
- Do not use this tool in wet weather.
- Do not use the tool in bad weather conditions (rain, thunderstorms, storms, etc.) and when there is a risk of
lightning
- The handling / connection of the cables must be dry.
- An incorrect connection can cause serious injury or death.
- Check that the battery is in good condition. Do not use the appliance if the appliance is damaged or worn.
- Never use the appliance if the guards are defective or without safety devices, for example the grass catcher in place.
- Mow by day or under adequate artificial light.
- Avoid operating the unit in wet grass or in the rain.
- Make sure the battery is inserted correctly in the machine.
- Do not expose the cable to sources of heat. Do not allow it to come into contact with solvents, oil, fuels, or smudged
objects.
- Stop and remove the battery:
oWhenever you leave the device
oBefore solving a problem.
oBefore checking, cleaning or working on the unit.
oIf the unit starts to vibrate abnormally
- Always ensure your position on the slopes.
- Mow facing slopes, never up and down.
- Be extremely careful when changing direction on slopes.
- Do not mow on slopes of more than 20 °.
- Walk, never run, do not get pulled by the lawn mower.
- Be extremely careful when pulling the lawn mower toward you.
- Stop the engine if you must tilt the lawnmower for transport, when crossing areas other than grass, and when
transporting it to another area to be mowed.
- Never operate the lawn mower with defective protections, or without a safety device, such as a deflector or grass
catcher that is not in place.
- Start the engine with the switch on, cautiously as instructed, and feet well away from the blade.
- Do not tilt the mower when starting the engine.
- Start the engine on a flat surface with no obstacles or grass too high.
- Do not put your hands or feet under rotating parts.
- When working on the grass catcher or on the ejection duct, stop the engine.
- Never lift or carry a lawnmower with the engine running.
- When mowing, always keep a safe distance from the rotating blade. This distance is the length of the handlebars.
- After a breakdown, stop the engine immediately, do not continue mowing, take the machine to an authorized
service center and ask qualified personnel to eliminate the problem.
Residual risks
Even if you use this product in compliance with all safety requirements, the potential risks of injury and damage remain.
The following hazards may arise in the structure and design of this product.
- There are adverse health consequences resulting from the emission of vibration if the product is used for long
periods of time or not properly managed and properly maintained.
- There are risks of injury and property damage due to attachments or broken the sudden impact of hidden objects
when using cutting.
- Risk of injury to persons and property caused by flying objects.
- Prolonged use of this product exposes the operator to vibrations and can produce so-called "white finger" disease.
To reduce the risk, wear gloves and keep your hands warm. If any of the symptoms of "white finger syndrome"
occur, seek immediate medical attention. Symptoms of "white finger" include numbness, loss of sensitivity, tingling,
tingling, and pain, loss of strength, color changes or skin condition. These symptoms usually appear on the fingers,
hands or wrists. Risk increases at low temperatures.
Intended use
This lawnmower is designed for natural grass mowing. Any other use is prohibited.
It is suitable only for private use in a garden or plot. Lawnmowers designed for private plots or gardens are those used
for the maintenance of grassy areas and private lawns and should not be used in public areas, parks, sports,
agricultural or forest areas.
Symbols
Read instructions manual
Risk of projections; Keep bystanders away
Beware of sharp blades. Blades continue to rotate after the motor is switched off – Remove disabling device
before maintenance
Do not touch the accessible hot parts.
Do not touch rotate blades
Wear ocular protection and hearing protection
Do not start the tool on a slope
DESCRIPTION
TECHNICAL DATA
CORDLESS LAWNMOWER
Model
EZ40VTDE46N
Voltage
36V , Max. 40V
Charge time
3 hours (4.0 Ah battery)
No-load speed
2800-3300/min
Cutting width
457 mm
Grass catcher capacity
60 L
Height adjustments
2.5 - 7.5 cm (6 positions)
Functions
3-in-1: Mulch, side discharge and grass catcher
weight (with 4.0Ah battery)
28 kg
Sound power level
94 dB(A)
Sound pressure level
88,4 dB(A) K= 3 dB(A)
Vibration
2,2 m/s² K= 1,5 m/s²
ASSEMBLY
UNFOLDING AND ADJUSTING LOWER HANDLE
WARNING
Folding or unfolding the handle improperly can damage the cables, causing an unsafe operating condition.
• Do not damage the cables when folding or unfolding the handle.
• If a cable is damaged, contact an Authorized Service Dealer.
UNFOLDING AND ADJUSTING HANDLE ASSEMBLY
a. To raise handle assembly:
• Pull up and back on the lower handle (1) until it is aligned with the hole
position of the arm support and the mower housing.
• To secure the lower handle (1) in place, lock the lower screw (3).
• Open the upper cam locks (2).
• Pull up and back on the upper handle to raise it into operating position.
• To secure the upper handle in place, close the upper cam locks (2).
NOTE: If the upper handle is loose or separated from the lower
handle, tighten the knobs on the upper handle locks by turning them clockwise.
INSTALLING THE GRASS CATCHER BAG
• Lift the rear discharge door (1).
• Lift the grass cat her by its handle (2) and place under the rear
discharge door so that the hooks (3) on the grass catcher are seated
on the door rod (4).
• Release the rear discharge door. When installed correctly, the
hooks on the grass catcher will extend through the openings on the
rear discharge door.
NOTE: When using the grass catcher, do not install either the
side discharge deflector or the mulching plug.
INSTALLING/REMOVING THE MULCHING PLUG
• To remove the mulching plug, lift the rear discharge door
(1).
• Grasp the handle (2) of the mulching plug.
Lift and pull the mulching plug out using the handle.
• The mulching plug (3) is inserted at an angle, so it requires
some force to remove it.
• The mulching plug must be removed in order to install the
grass catcher bag.
• The mulching plug must be re-installed when the grass catcher bag is removed.
NOTE: When mulching, do not install either the side discharge deflector or the grass catcher bag.
INSTALLING SIDE DISCHARGE CHUTE
• Lift the side discharge cover (1).
• Align the grooves (2) on the discharge chute (3) with the
pins (4) on the underside
of the discharge cover (1).
• Lower the discharge chute until the hooks on the mower
deck are secured in the openings in the discharge chute.
• Release the side discharge cover.
NOTE: When using side discharge, do not install the
grass catcher bag. Ensure the mulch plug is installed.
TO INSTALL BATTERY PACK
• Lift and hold up the battery door.
• Align the battery with the mower battery port.
• Make sure the battery release button snaps in place and that battery is fully seated and secure in the mower before
beginning operation.
• If the machine is not going to be used immediately, remove the battery.
TO REMOVE BATTERY PACK
• Release the bail lever to stop the mower.
• Press the battery release button (3) on the mower. Open the battery door.
• Remove battery from the mower.
Inhaltsverzeichnis
Andere Energizer Rasenmäher Handbücher
Beliebte Rasenmäher Handbücher anderer Marken
TALEN TOOLS
TALEN TOOLS AVR HGM30 Bedienungsanleitung
DEWEZE
DEWEZE ATM-725 Bedienungsanleitung
Weed Eater
Weed Eater 180083 Bedienungsanleitung
Husqvarna
Husqvarna Poulan Pro PP185A42 Bedienungsanleitung
Better Outdoor Products
Better Outdoor Products Quick Series Bedienungsanleitung
Cub Cadet
Cub Cadet 23HP Z-Force 60 Betriebsanleitung
