EnGenius EAP300 Bedienungsanleitung

EnGenius® Quick Installation Guide

EAP300 802.11b/g/n Wireless Access Point

Package Contents

Unpack the box and verify the contents:

•EAP300 802.11b/g/n Wireless Access Point

•Category 5 Ethernet Cable

•Power Adaptor

•Wall Mount Kit

•EAP300 802.11b/g/n Wireless Access Point Quick Installation Guide

•EAP300 802.11b/g/n Wireless Access Point Instruction Manual

•Resource CD

Setting Up the EAP300

After verifying the contents of the box, continue on to setting up the EAP300.

Hardware Installation

1) Ensure that the computer in use has an Ethernet Card (RJ-45 Ethernet Port). For more

information, verify with User Manual.

2) Connect one end of the Category 5e Ethernet cable into RJ-45 port of the EAP300 and the other

end to the RJ-45 port on the computer that will use the EAP300. Ensure that the cable is securely

connected to both the EAP300 and the Computer.

3) Connect the Power Adaptor DC Inlet to the DC-IN port of the EAP300 and the Power Adaptor to

the electrical out. Once both connections are secure, verify the following:

a) Ensure that the Power light on the right is on (it will be blue).

b) Ensure that the Wireless light on the left is on (it will be blue).

c) Ensure that the LAN (Computer/EAP300 Connection) light in the middle is on (it will be

blue).

d) Once all three lights are on, proceed to setting up the computer.

Computer Setup

1) After ensuring the EnGenius device is powered on and plugged in, ensure that your computer is

on.

2) For the next steps, refer to your Operating System User Manual.

3) Once your computer is on, ensure that your TCP/IP is set to On or Enabled. (In the control panel,

double click Network Connections and then double click on the connection of your Network

Interface Card (NIC). Select Internet Protocol (TCP/IP) and then click on the Properties button.)

4) If your PC is already on a computer network, ensure that you have set it to a Static IP Address on

the interface (or Ethernet card that will use the EAP300) as 192.168.1.21 and the Subnet Mask

address as 255.255.255.0. (Select Use the following IP Address radio button). Once the

computer has been prepared, proceed to setting up the EAP300.

EAP300 Setup

1) To configure EAP300, open a web browser (example: Microsoft Internet Explorer, Mozilla Firefox,

Google Chrome, etc.).

2) In the address bar of the web browser, enter 192.168.1.1 (the default IP address of the EAP300)

and hit enter.

3) A login screen will appear. By default, the username of the EAP300 is admin and the password is

admin. Enter the current username and password of the EAP300 and then click Login. Refer to

the EAP300 user manual on how to change the

username and password.

4) After clicking Login with the correct username and

password, the EAP300 Main Menu will appear. If you are

successful, proceed to setting up the wireless

connection.

Wireless Setup

1) To setup the wireless connection, select Wireless on the

main menu. After selecting Wireless, select Basic.

2) Ensure that the Radio is set to Enable.

3) Select the wireless band you want (by default, it is set to 2.4 GHz B+G+N).

4) Enter the number of Wireless Points by changing the value in Enabled ESSID#.

5) Name the wireless connection by entering the name in the fields: ESSID1,ESSID2,ESSID3,

and/or ESSID4. (Note: This only applies if you have multiple SSID).

http://192.168.1.1

6) Click Apply.

7) All basic setup is completed. Note: The wireless connection is not secure. To setup security on

the EAP300, refer to the EAP300 User Manual. Also, to share internet connection, the Ethernet

Card that the EAP300 must be bridge to another Ethernet Card with an internet connection. Refer

to your Operating System User Manual for more information.

Andere Handbücher für EAP300

Inhaltsverzeichnis

Andere EnGenius Drahtloser Zugangspunkt Handbücher

EnGenius

EnGenius EOC5611P Bedienungsanleitung

EnGenius

EnGenius Neutron EWS210AP Bedienungsanleitung

EnGenius

EnGenius ECB300 Bedienungsanleitung

EnGenius

EnGenius ENH500 Bedienungsanleitung

EnGenius

EnGenius ESR-1221N Bedienungsanleitung

EnGenius

EnGenius EMD2 Bedienungsanleitung

EnGenius

EnGenius Wireless Outdoor Access Point & Client... Bedienungsanleitung

EnGenius

EnGenius EAP350 Bedienungsanleitung

EnGenius

EnGenius Turbo Engine Series Bedienungsanleitung

EnGenius

EnGenius ECB600 Bedienungsanleitung

EnGenius

EnGenius EOC2611P Bedienungsanleitung

EnGenius

EnGenius EOC-5610 Bedienungsanleitung

EnGenius

EnGenius EAP9550 Bedienungsanleitung

EnGenius

EnGenius EWS371AP Bedienungsanleitung

EnGenius

EnGenius ENH500 Bedienungsanleitung

EnGenius

EnGenius EOC-5610 Bedienungsanleitung

EnGenius

EnGenius EOC1650 Bedienungsanleitung

EnGenius

EnGenius ENS202EXT Bedienungsanleitung

EnGenius

EnGenius EAP9550 Bedienungsanleitung

EnGenius

EnGenius EAP300 Bedienungsanleitung

EnGenius

EnGenius ENS620EXT Bedienungsanleitung

EnGenius

EnGenius ENH700EXT Bedienungsanleitung

EnGenius

EnGenius ENH500 Bedienungsanleitung

EnGenius

EnGenius EOC-3610s-EXT Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung

Draytek

Draytek VIGORAP 902 Bedienungsanleitung