EnGenius EOC5510 Bedienungsanleitung

EOC5510 is a long range outdoor wireless Access Point / Client Bridge that

operates in 5GHz frequency. It provides high bandwidth up to 54Mbps and

features high transmied output power as well as superior sensivity. EOC5510

extends radio coverage, avoids unnecessary roaming between Access Points and

ensures a stable wireless connecon while reduces the number of required

equipments.

EOC5510 provides user friendly interface including user friendly distance control

ranges from 1KM up to 30KM and RSSI LED indicator oﬀering real me signal

status. It comes with PoE injector for convenient outdoor installaon.

EOC5510 enforces transmission security with full support of latest encrypon

mechanism including 64/128/152-bit WEP, WPA and WPA2. With 10dBi internal antenna and superior

performance, EOC5510 makes an opmal wireless soluon for both small and large scale projects.

IP Address Conﬁguraon

The default IP address of the device is

192.168.1.1.In order to log into this device, you

must ﬁrst conﬁgure the TCP/IP sengs of your

PC/Notebook.

1. In the control panel, double click Network

Connecons and then double click on the

connecon of your Network Interface Card

(NIC). You will then see the following

screen.

2. Select Internet Protocol (TCP/IP) and then

click on the Properes buon. This will

allow you to conﬁgure the TCP/IP sengs

of your PC/Notebook.

3. Select Use the following IP Address radio

buon and then enter the IP address

(192.168.1.21) and subnet mask

(255.255.255.0). Ensure that the IP address

and subnet mask are on the same subnet as

the device.

4. Click on the OK buon to close this window,

and once again to close LAN properes

window.

Logging In

1. To conﬁgure the device through the

web-browser, enter the IP address of the

Bridge(default: 192.168.1.1) into the

address bar of the web-browser and

pressEnter.

2. Aer connecng to the IP address, the

web-browser will display the login page.

Specify admin as the default User Name

and Password, and then click on the Login

buon.

Administraon

1. Click on the Administraon link under the

Management secon. This opon allows

you to modify for a new user name and

password on the device. For security it is

highly recommended for security reasons.

2. Name: Specify a user name into the ﬁrst

ﬁeld.

3. Password: Specify a password into this ﬁeld

and then re-type the password into the

Conﬁrm Password ﬁeld. Then click on the

Apply buon.

4. Click on the Apply buon to save the

changes.

System Properes

1. Click on the System Properes link on the

System secon. This feature allows you to

conﬁgure the device as an Access Point or

Repeater.

2. Device Name: Specify a name for the

device – this is not the SSID.

Quick Start Guide

0.1.vediuGtratSkciuQ

snoitcurtsnietelpmocroflaunaMs’resUotrefeR

EOC5510

802.11 a

Wireless Access Point & Clent Bridge

4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

Quick Start Guide

0.1.vediuGtratSkciuQ

snoitcurtsnietelpmocroflaunaMs’resUotrefeR

EOC5510

802.11 a

Wireless Access Point & Clent Bridge

3. Country/Region: Select the region from the

drop-down list.

4. Operaon Mode: Select Access Point,

Client Bridge, Client Router or WDS radio

buon.

5. Click on the Apply buon to save the

changes.

IP Sengs

1. Click on the IP Sengs link on the

System secon. This feature allows you

to conﬁgure the LAN interface using a

stac IP address or as a DHCP client.

This IP address is also used to access the

web-based interface.

2. IP Network Seng: Select Obtain an IP

address automacally (DHCP) radio

buon if the Access Point is connected

to a DHCP server. This will allow the

Access Point to pass IP addresses to the

clients associated with it. Or You may

select Specify an IP Address radio

buon if you would like the device to

use a stac IP address. In this case, you

would be required to specify an IP

address, subnet mask, and default

gateway IP address.

3. IP Address: Specify an IP address

4. IP Subnet Mask: Specify the subnet

mask for the IP address

5. Default Gateway: Specify the IP address

of the default gateway.

6. Click on the Apply buon to save the

changes.

Note: If you change the IP address here, you

may need to adjust your PC’s network sengs

to access the network again.

Wireless Network & Security

1. Click on the Wireless Network link on

the Wireless secon. This feature allows

you to conﬁgure the wireless mode,

channel, SSID, and security sengs.

2. Wireless Mode: 802.11a

3. Channel: Select a channel from the

drop-down list. The channels available

are based on the country’s regulaon.

4. You may conﬁgure up to four diﬀerent

wireless proﬁles. Click on the Edit

buon to modify the proﬁle and place a

check in the Enable box to acvate the

proﬁle.

5. SSID: The SSID is a unique named shared

amongst all the points of the wireless

network. The SSID must be idencal on

all points of the wireless network and

cannot exceed 32 characters.

6. VLAN ID: If you have enabled VLAN

tagging on your network, specify the

VLAN tag ID.

7. Suppressed SSID: Place a check in this

box if you would like to hide the SSID. By

enabling this feature, wireless clients

will not be able to scan this access point

in a site survey.

8. Staon Separator: This is also known as

layer 2 isolaon. Clients connected to

this Access Point will not be able to

directly communicate with each other.

9. Security Mode: By default, the security

is disabled. Refer to the user’s Manual

to conﬁgure the security features such

as WEP, WPA, WPA-PSK, WPA2,

WPA2-PSK and WPA-Mixed.

10. Click on the Apply buon to save the

changes

4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

Andere Handbücher für EOC5510

Andere EnGenius Drahtloser Zugangspunkt Handbücher

EnGenius

EnGenius EAP300 Bedienungsanleitung

EnGenius

EnGenius EMD1AP Bedienungsanleitung

EnGenius

EnGenius ENS200EXT Bedienungsanleitung

EnGenius

EnGenius EOC-2610 Bedienungsanleitung

EnGenius

EnGenius ECB350 Bedienungsanleitung

EnGenius

EnGenius ENH202 Bedienungsanleitung

EnGenius

EnGenius ENS200 Bedienungsanleitung

EnGenius

EnGenius ENH500 Einrichtungshandbuch

EnGenius

EnGenius ENS200 Bedienungsanleitung

EnGenius

EnGenius ENS202v2 Bedienungsanleitung

EnGenius

EnGenius ENH500 Bedienungsanleitung

EnGenius

EnGenius ECB3500 Bedienungsanleitung

EnGenius

EnGenius ENS200EXT Bedienungsanleitung

EnGenius

EnGenius ENH700EXT Bedienungsanleitung

EnGenius

EnGenius ENS200 Bedienungsanleitung

EnGenius

EnGenius M36 Bedienungsanleitung

EnGenius

EnGenius EAP300 Bedienungsanleitung

EnGenius

EnGenius EWS850-FIT Bedienungsanleitung

EnGenius

EnGenius ENS500 Bedienungsanleitung

EnGenius

EnGenius EAP600 Leitfaden

EnGenius

EnGenius ECB600 Bedienungsanleitung

EnGenius

EnGenius EWS500AP Bedienungsanleitung

EnGenius

EnGenius ENH200 Bedienungsanleitung

EnGenius

EnGenius EWS377-FIT Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung

Draytek

Draytek VIGORAP 902 Bedienungsanleitung