EPH Controls HRT Betriebsanleitung

Installation and Operation Guide

Room Thermostat

HRT

Factory default settings

Specications

LCD Display

Buttons

Wiring

Mounting & installation

Replacing the batteries

Locking the Keypad / Backlight

Menu Function

On / O Function & Adjusting the target temperature

Table of contents

Installation Instructions

Operating Instructions

Delay Start Control (On/O)

PO 1 Operating Mode

Nor (Normal Mode)

Time Proportional Integral Mode (TPI)

PO 2 Setting High and Low limits

PO 3 Hysteresis HOn and HO

PO 4 Calibration

PO 5 Setback Mode

PO 6 Frost Protection

Resetting the Thermostat

Battery operated non-programmable Room Thermostat

Installation Instructions

2HRT

Factory default settings

Contacts: Volt Free

High and Low Temp. limitation: O

Keypad lock: O

Backlight: Auto

Setback: 0.0˚C (o)

Operating mode: Normal

EPH Controls Ltd.

Specications

Power supply / Input: 2 x AA Alkaline Batteries

Power consumption: Operating <0.05W

Standby <0.1mW

Temperature range: 5 … 35˚C

Ambient temperature: 0 … 45˚C

Ambient admissible humidity: 5-95%RH

Contact rating: 8A 230Vac

Dimensions: 85 x 85 x 36mm

Temperature sensor: NTC 100K

Backlight: White

IP rating: IP20

Pollution degree: 2

Switching dierential: Adjustable from 0.0 – 1.0°C

0.1°C increments

Automatic action: 1C

4HRT

[1] [2]

[7]

[3]

[4][5]

[6]

[1] Shows the current / target temperature.

[2] Displayed when batteries need to be replaced.

[3] If the keypad is locked, the lock symbol is displayed.

[4] When the thermostat is calling for heat, the ame

symbol is displayed.

[5] When a high or low temperature limit is set, ‘LIM’ is displayed.

[6] Displayed when setback is enabled.

[7] Displayed when delay start is enabled.

LCD Display

EPH Controls Ltd.

Buttons

Handwheel

Reset

Button

Standby Button

6HRT

Wiring

321

COM

230V on Terminal 1: Thermostat works in Normal mode

0V on Terminal 1: Thermostat works in Setback mode

Terminal Connections

Terminal 1 Setback

Terminal 2 Common

Terminal 3 On

EPH Controls Ltd.

Mounting & Installation

Caution!

Installation and connection should only be carried out by a qualied person.

Only qualied electricians or authorised service sta are permitted to open the

thermostat.

If the thermostat is used in a way not specied by the manufacturer, its safety may be

impaired.

Prior to setting the thermostat, it is necessary to complete all required settings

described in this section.

Before commencing installation, the thermostat must be rst disconnected from the

mains.

This thermostat can be mounted in the following ways:

1) Directly mounted on wall

2) To a recessed conduit box

8HRT

1) Remove the thermostat from its packaging.

2) Choose a mounting location so that the thermostat can measure

the room temperature as accurately as possible.

- Mount the thermostat 1.5 metres above the oor level.

- Prevent direct exposure to sunlight or other heating / cooling

sources.

3) To open the front housing

a) use a philips screwdriver to loosen the screw on the bottom

right of the thermostat.

b) insert and rotate a 3.5mm at screwdriver into the slot on

the bottom left.

4) Wire the thermostat according to the wiring diagram on page 6.

5) Screw the backplate onto a back box or directly to the surface.

6) Close the front housing and tighten the screw on the bottom of

the thermostat.

Mounting & Installation Continued

Andere Handbücher für HRT

Inhaltsverzeichnis

Andere EPH Controls Thermostat Handbücher

EPH Controls

EPH Controls RDT Betriebsanleitung

EPH Controls

EPH Controls CDTP2 Bedienungsanleitung

EPH Controls

EPH Controls R37 Bedienungsanleitung

EPH Controls

EPH Controls E 15402 Bedienungsanleitung

EPH Controls

EPH Controls CDTP2 Bedienungsanleitung

EPH Controls

EPH Controls T27-RFi Bedienungsanleitung

EPH Controls

EPH Controls RFRP-OT Bedienungsanleitung

EPH Controls

EPH Controls RFRB Bedienungsanleitung

EPH Controls

EPH Controls CRTP2 Bedienungsanleitung

EPH Controls

EPH Controls COMBIPACK4 Betriebsanleitung

EPH Controls

EPH Controls RFRA Bedienungsanleitung

EPH Controls

EPH Controls curve crtp Bedienungsanleitung

EPH Controls

EPH Controls CDT2-24 Bedienungsanleitung

EPH Controls

EPH Controls EDBS Betriebsanleitung

EPH Controls

EPH Controls CRTP2 Betriebsanleitung

EPH Controls

EPH Controls RFRP-HW-OT Bedienungsanleitung

EPH Controls

EPH Controls RFPi2 Bedienungsanleitung

EPH Controls

EPH Controls CP4M Bedienungsanleitung

EPH Controls

EPH Controls RFCA-RF Bedienungsanleitung

EPH Controls

EPH Controls TRFPi2 Bedienungsanleitung

EPH Controls

EPH Controls CP4B Betriebsanleitung

EPH Controls

EPH Controls CP4M Betriebsanleitung

EPH Controls

EPH Controls CRT2 Bedienungsanleitung

EPH Controls

EPH Controls RFRP Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung