Epoke TKG12 Bedienungsanleitung

epoke®

500484

GB-0612.2

Instruction manual

TK, TMK

Valid from ident. no. xxxx0200

If you have technical questions please state ident. no., which is on the machine sign. We recommend that you write this

number here:

Type: ..................................................

Year: .................................................. Ident. no.: .............................................

Valid from ident. no.:

TK: TKG12 11010200

TK12E 12100200

TK12E-275 12110200

TKB9-280 11070200

TKB12-280 11080200

TMK: TMK10 14000200

TMK10-275 14050200

TMK7 14040200

TMK7GT 14060200

Published and printed by

Epoke®A/S,

Documentation department

Changes of technical details in relation to specifi-

cations and sketches in this instruction are subject

to alteration.

This instruction answers important questions regar-

ding safety, operation, maintenance and technical

data.

epoke®

TK, TMK

GB-0612.2

Table of contents

1 Identification

1.1 Manufacturer and supplier . . . . . . . . . . . . . . . 2

1.1.1 Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1.1.2 Technical documentation . . . . . . . . . . . . . . . . 2

1.1.3 Warranty and liability . . . . . . . . . . . . . . . . . . 2

1.2 Model and type specification . . . . . . . . . . . . . 3

1.3 Start no. and date . . . . . . . . . . . . . . . . . . . . . . 3

1.4 Country of origin . . . . . . . . . . . . . . . . . . . . . . . 3

1.5 CE-mark . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.6 EU certificate of conformity . . . . . . . . . . . . . . . 3

1.6.1 Directives applied . . . . . . . . . . . . . . . . . . . . . . 3

1.6.2 Standards applied . . . . . . . . . . . . . . . . . . . . . . 3

1.9 Quality system certificate . . . . . . . . . . . . . . . . 3

2 Descriptions

2.0.0 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.0.1 Transport and handling . . . . . . . . . . . . . . . . . . 4

2.0.1.1 Transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.0.1.2 Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.0.1.6 Rules for total weight of towed vehicles . . . . . 4

2.0.2 Information on restrictions on use . . . . . . . . . . 4

2.0.2.1 Normal use . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.0.2.2 Abnormal use . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.0.3 Hazards presented by the machine

2.0.3.1 Personal protective measures . . . . . . . . . . . . 4

2.0.3.2 Mechanical hazard . . . . . . . . . . . . . . . . . . . . . 4

2.0.3.3 Electrical hazard . . . . . . . . . . . . . . . . . . . . . . . 4

2.0.3.4 Thermal hazard . . . . . . . . . . . . . . . . . . . . . . . 5

2.0.3.5 Hazard caused by noise . . . . . . . . . . . . . . . . . 5

2.0.3.6 Hazard caused by vibrations . . . . . . . . . . . . . 5

2.0.3.7 Hazard caused by radiation . . . . . . . . . . . . . . 5

2.0.3.8 Hazard caused by materials and substances . . 5

2.1 Safety measures

2.1.1 General safety measures . . . . . . . . . . . . . . . . 5

2.1.2 Reference to permitted total weight . . . . . . . . 5

2.1.3 Reference to safety measures for specific

operating conditions . . . . . . . . . . . . . . . . . . . . 6

2.1.3.1 Safety measuresWork safety . . . . . . . . . . . . . 6

2.1.3.2 Work safety . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2.1.3.3 Before driving . . . . . . . . . . . . . . . . . . . . . . . . . 7

2.1.3.4 Safety during cleaning,

repairs and maintenance . . . . . . . . . . . . . . . . 7

2.1.3.5 Suggestions for a user guide . . . . . . . . . . . . . 7

2.1.4 Guidelines for chains . . . . . . . . . . . . . . . . . . 8

2.1.10 Oil (TKG12) . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2.1.11 Lubricating grease . . . . . . . . . . . . . . . . . . . . . 8

2.2 Product descriptions

2.2.0.1 Machine overview . . . . . . . . . . . . . . . . . . . . . 9

2.2.1 Product description . . . . . . . . . . . . . . . . . . . . . 10

2.2.4 Dosage system . . . . . . . . . . . . . . . . . . . . . . . . 11

2.3 Technical data

2.3.1 Technical data . . . . . . . . . . . . . . . . . . . . . . . . 13

2.3.2 Dimensioned sketch . . . . . . . . . . . . . . . . . . . 14

2.4 Diagrams

2.4.3 Electrical diagram . . . . . . . . . . . . . . . . . . . . . . 15

2.5 Corrosion protection . . . . . . . . . . . . . . . . . . . . 15

2.8 Environmental protection . . . . . . . . . . . . . . . . 15

3 Demands to the place of mounting

3.1 Demands to the bed plate . . . . . . . . . . . . . . . . 15

3.2 References to dangers which can be

prevented by methods of mounting . . . . . . . . 15

4 Instructions for preparations

4.1.1 Connection with the towing vehicle . . . . . . . . 15

4.1.2 Disconnection . . . . . . . . . . . . . . . . . . . . . . . . 15

5 Operation instructions

5.0.1 Remote control . . . . . . . . . . . . . . . . . . . . . . . . 15

5.1.5 Operating levers . . . . . . . . . . . . . . . . . . . . . . . 16

5.2 Instructions for Initial Operation

5.2.1 Fill up with oil before use . . . . . . . . . . . . . . . . 17

5.2.2 Adjustment of spreading quantity (metering) . . 17

5.4 Instructions for preparations

5.4.1 Attachment to the towing vehicle . . . . . . . . . . 18

5.4.2 Remote control . . . . . . . . . . . . . . . . . . . . . . . 18

5.4.2.1 Correct installation . . . . . . . . . . . . . . . . . . . . . 18

5.4.2.2 Connection of remote control . . . . . . . . . . . . . 18

5.11 Procedure in case of failure . . . . . . . . . . . . . . . . 19

5.12 Instructions for repair and assembly . . . . . . . 19

6 Maintenance

6.2.1 Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

6.2.2 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . 19

6.2.3 Storing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

6.3 Inspection lists and overviews

6.3.1 Inspection list - mechanical . . . . . . . . . . . . . . 20

6.3.4 Oil and grease . . . . . . . . . . . . . . . . . . . . . . . . 22

6.7 Reference to suitable spare parts . . . . . . . . . . 22

7 Control and test sketch

7.1.2 Steel chains . . . . . . . . . . . . . . . . . . . . . . . . . 23

7.1.6 Dry matter container . . . . . . . . . . . . . . . . . . . . 24

7.1.12 Draw bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

7.1.20 Tyre list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

8 Certificates

8.1.1 EU certificate of conformity TK . . . . . . . . . . . 27

8.1.2 EU certificate of conformity TMK . . . . . . . . . . 28

8.4 Certificate of Quality Management System . . 29

epoke®

TK, TMK

GB-0306.1

1 Identification

1.1 Manufacturer and supplier

Epoke®A/S

Vejenvej 50

Askov

DK-6600 Vejen

1.1.1 Copyright

The firm of Epoke®A/S, DK-6600 Vejen owns the

Mechanical, photographic or other reproduction or dupli-

cation of this technical documentation or parts of it is for-

bidden. The technical documentation is only intended for

the purchaser and his personnel.

1.1.2 Technical documentation

This technical documentation contains:

•An instruction book

• List of spare parts

These appendices contain basic instructions which must

be followed and read by the fitter / user before assembly

and commissioning. The technical documentation shall

always be available where the spreader is used.

The personnel who will be involved in operation, servicing,

inspection and assembly shall have the corresponding

qualifications for these areas of work. The area of respon-

sibility, competence and monitoring of personnel must be

defined exactly by the employer. If personnel do not have

the necessary knowledge, they must be trained and

instructed. If necessary, this can be implemented through

the manufacturer/supplier as desired by the

purchaser/user of the spreader. Training abroad is carried

out by the local dealers. Moreover, the employer/user

must ensure that personnel have fully understood the

content of the technical documentation.

1.1.3 Warranty and liability

The general terms of sale and delivery apply unless agreed

otherwise and confirmed in writing upon entering into the

contract. Warranty liability and liability for damages are

excluded for personal injury and material damage if the

injury or damage may be due to one or more of the fol-

lowing reasons:

•Abnormal use of the spreader

• Inexpert assembly, commissioning operation and servi-

cing of the spreader.

•Driving with the spreader with defective safety devices

or incorrectly applied or non-functioning safety and pro-

tection devices.

•Non-compliance with the instructions in the technical

documentation with regard to safety, transportation,

storage, assembly, commissioning, operation and main-

tenance of the spreader.

•Design changes to the spreader which are not perfor-

med or approved by the manufacturer.

•Use of non-EPOKE original spare parts

•Inadequate monitoring of parts which are exposed to

wear.

•Inexpertly executed repairs

epoke®

TK, TMK

GB-0612.2

1.2 Model and type specification

Model: Tow-behind spreader

Trade designation: TKG12

TK12E

TK12E-275

TKB9-280

TKB12-280

TMK10

TMK10-275

TMK7

TMK7GT

Type: TK

TMK

Ident. no.: 11010200 (TKG12)

12100200 (TK12E)

12110200 (TK12E-275)

11070200 (TKB9-280)

14000200 (TMK10)

14050200 (TMK10-275)

14040200 (TMK7)

14060200 (TMK7GT)

(first 4 digits are type designation, the last 4 digits are

continuous numbering)

Composition of machine sign:

• Type:

• Ident. no.

• Year

• Volume, m3

• Net weight kg

• Permitted axle load, kg

• Permitted total weight kg

• Permitted support load, kg

• Name and address of manufacturer

The nameplate is located on the spreader’s right side,

near the transmission.

1.3 Start no. and year

Valid from ID no.: TKG12 - 11010200 - 2000

TK12E - 12100200 - 2000

TK12E-275 - 12110200 - 2000

TKB9-280 - 11070200 - 2000

TKB12-280 - 11080200 - 2006

TMK10 - 14000200 - 2000

TMK10-275 - 14050200 - 2000

TMK7 - 14040200 - 2000

TMK7GT - 14060200 - 2000

1.4 Country of origin

Denmark.

1.5 CE-mark

CE-mark is placed on the machine sign.

1.6 EU certificate of conformity

The above spreader has been manufactured in accordance

with the provisions of the COUNCIL DIRECTIVE of 22.

June 1998 on convergence of member states' legislation

on machinery (98/37/EF) with particular reference to

Appendix 1 of the Directive, on material health and safety

standards in connection with the construction and manu-

facture of machines, see item 8.

1.6.1 Directives applied

(89/392/EEC - 14.06.1989)

(91/368/EEC - 20.06.1991)

(93/44/EEC - 14.06.1993)

(93/68/EEC - 22.07.1993)

98/37/EF - 22.06.1998

1.6.2 Standards applied

EN294:1994, EN349:1994, EN811:1999, EN ISO 12100-

1:2003, EN ISO 12100-2:2003, EN 13021:2004.

1.9 Quality system certificate

See item 8.4.

epoke®

TK, TMK

GB-0306.1

2 Descriptions

2.0.0 General

Important instructions are highlighted in each section.

Explanations of symbols

Warning (Work safety signal)

Safety should be observed where this sign is

positioned. Pay attention to this safety informa-

tion sign and follow it be careful. Always follow

the general safety regulations as well.

Information

In the instructions for use, this symbol is placed

next to all important information relating to opera-

tion or the equipment’s function.

Later on, these symbols will be used for visual registration

of danger information signs.

2.0.1 Transport and handling

2.0.1.1 Transport

During transport, empty the solids tank and the loosen

spring base adjustment on the spreader.

Danger!

Road-users may be seriously injured, e.g. due

to projec-ting parts, loss of the spreader, etc.!

The spreader should be properly fastened.

Information!

•The spreader should only be put down on a level surface.

•The spreader should be adequately secured on the car-

rying vehicle.

•Electrical parts should be protected against humidity.

2.0.1.2 Handling

A crane must be used at all times when trans-

porting or using the spreader. The spreader sho-

uld be raised using the fastening rings.

Note the lifting tackle’s load capacity and the spreader’s

centre of gravity!

People can be seriously injured - e.g. through crushing!

2.0.1.6 Rules for total weight of towed vehicles

The total weight of the towed vehicle must never

exceed the weight limits stated by the manufacturer

of the vehicle/towbar.

In the case of cars, the weight limit may be found on the

manufacturer’s label on the car or in the user manual.

2.0.2 Information on restrictions on use

2.0.2.1 Normal use

Machines for winter service are machines for

removing winter obstacles in traffic areas, and

spreaders are machines for defined spreading

of thawing materials or sand on surfaces carrying traffic.

The spreaders must only be used for the purpose for

which they are intended. The spreaders must only be

operated, repaired and maintained by persons who are

fully familiar with these areas. These persons shall also

be informed about the dangers which the spreader can

pose.

Note - Only persons who are physically and psychologi-

cally suitable, and who are familiar with the content of the

operating instructions, may use the machine.

The user shall comply with the references in the operating

instructions.

Note - The manufacturer’s liability for any damage that may

occur shall lapse in the event of any form of abnormal use.

2.0.2.2 Abnormal use

Abnormal use is

• when the spreaders are not used as spreaders

for winter service, and when the spreader has

not been mounted and connected correctly to

the towing vehicle.

•when the spreader is used for spreading materials which

are not used for combating icy roads.

• when the spreader is towed using an unsuitable vehicle

without taking into account the weight limits imposed by

the manufacturer of the vehicle. (trailer spreader only).

2.0.3 Hazards presented by the machine

2.0.3.1 Personal protective measures

As the design and construction ensure that the

operator's freedom of movement is not reduced,

use of personal protective measures (shoes, glo-

ves etc.) is not required.

2.0.3.2 Mechanical hazard

There is a risk of injury and damage from squas-

hing, cutting and from sharp edges. To the extent

possible, points on machines that present such

hazards are fitted with protective devices.

2.0.3.3 Electrical hazard

• Work on the power supply must only be carried

out by an expert electrician.

• Loose connections and burnt-out cables must

be replaced immediately.

• Use only original fuses.

epoke®

TK, TMK

GB-0612.2

2.0.3.4 Thermal hazard

Thermal Hazard - not applicable.

2.0.3.5 Hazard caused by noise

A noise measurement has not been carried out as the noi-

se pollution depends on the used vehicle.

2.0.3.6 Hazard caused by vibrations

Vibration measurement is omitted - not relevant.

2.0.3.7 Hazard caused by radiation

Radiation measurement is omitted - not relevant.

2.0.3.8 Hazard caused by materials and substances

Demounting (scrapping): Is to be carried out by a environ-

mental acknowledged scrap merchant.

2.1 Safety measures

2.1.1 General safety measures

All EPOKE spreaders and equipment can be

operated by one person. Spread is controlled

entirely from the driver’s cab.

Instruction - The owner of the carrying vehicle undertakes

to ensure that the spreader is used only by people who:

•know the basic safety regulations and are thoroughly

familiar with the operation of the spreader

•have read and understood the section on safety and the

warnings in the technical documentation.

Instruction - Everyone who is authorised to work with the

spreader undertakes:

•to familiarise themselves with the basic safety regulations.

•to read and understand the section on safety and the

warnings in the technical documentation.

Instruction - only trained and instructed personnel are

permitted to work with the spreader:

•The authorisation of the personnel for starting, operating,

maintenance and repair must be clearly defined.

•Personnel in training may only work with the spreader

under the supervision of an experienced person.

Instruction - The spreader is designed with the safety

regulations in mind. Even so, the life of the driver may be

at risk while the machine is in use.

The spreader may only be used for its intended purpose

and in the proper condition as regards safety equipment.

Out of consideration for safety, the following is to be

observed:

Before operation the operator is to check whether devices

for control, safety and protection are correctly fitted and ok.

If defects are noted on safety devices or when other de-

fects are noted which have influence on the safe

operation of the machine, there cannot be any operation

until these defects have been repaired.

Correction of flaws, maintenance and repairs are only to

be carried out, when the machine is not in operation.

After maintenance or repairs, the safety devices are to be

correctly placed.

2.1.2 Reference to permitted total weight

TKG12, TKEB12

Permitted total weight . . . . . . . . . . . . . . . . . . . . .2000 kg

Permitted axle load . . . . . . . . . . . . . . . . . . . . . . .1500 kg

Supporting load on draweye . . . . . . . . . . . . . . . . .640 kg

Net weight . . . . . . . . . . . . . . . . . . . . . . . . . . . .640 kg

TK12E, TK12E275

Permitted total weight . . . . . . . . . . . . . . . . . . . . .2000 kg

Permitted axle load . . . . . . . . . . . . . . . . . . . . . . .1500 kg

Supporting load on draweye . . . . . . . . . . . . . . . . .640 kg

Net weight . . . . . . . . . . . . . . . . . . . . . . . . . . . .600 kg

TKB9-280

Permitted total weight . . . . . . . . . . . . . . . . . . . . .2000 kg

Permitted axle load . . . . . . . . . . . . . . . . . . . . . . .1500 kg

Supporting load on draweye . . . . . . . . . . . . . . . . .640 kg

Net weight . . . . . . . . . . . . . . . . . . . . . . . . . . . .710 kg

TKB12-280

Permitted total weight . . . . . . . . . . . . . . . . . . . . .2000 kg

Permitted axle load . . . . . . . . . . . . . . . . . . . . . . .1500 kg

Supporting load on draweye . . . . . . . . . . . . . . . . .640 kg

Net weight . . . . . . . . . . . . . . . . . . . . . . . . . . . .710 kg

TMK10, TMK10-275

Permitted total weight . . . . . . . . . . . . . . . . . . . . .1500 kg

Permitted axle load . . . . . . . . . . . . . . . . . . . . . . .1300 kg

Supporting load on draweye . . . . . . . . . . . . . . . . .250 kg

Net weight . . . . . . . . . . . . . . . . . . . . . . . . . . . .400 kg

TMK7, TMK7GT

Permitted total weight . . . . . . . . . . . . . . . . . . . . .1300 kg

Permitted axle load . . . . . . . . . . . . . . . . . . . . . . .1300 kg

Supporting load on draweye . . . . . . . . . . . . . . . . .250 kg

Net weight . . . . . . . . . . . . . . . . . . . . . . . . . . . .340 kg

epoke®

TK, TMK

GB-0306.1

2.1.3 Reference to safety measures for specific

operating conditions

2.1.3.1 Safety measures

• The tow plate of the spreader must be vertical when the

vehicle is loaded.

• The draw bar is adjustable for height as well as length.

Important: When adjusting height, self-locking nuts (A)

must only be used once, i.e. always use new self-locking

nuts. Nut (M14 DIN 985 A2) torque must be 120 Nm.

• Connect the guide chain (safety chain) to the chassis of

the truck and tighten. See section 5.4.1.

The safety chains ensure that the spreader acts as a

part of the vehicle, particularly when reversing and on

tight bends. The safety chains must be adjusted to pre-

vent the spreader touching the bumper or lights (etc.) of

the towing vehicle.

• The stabiliser/supporting leg facilitates

connection/disconnection of the spreader. Before dri-

ving, the driver must check that the stabiliser/supporting

leg has been lifted.

• The depth of the tyre tread pattern must be min. 1.6

mm.

For information on air pressure in the road tyres, see

section 2.3.2.

epoke®

TK, TMK

GB-0306.1

2.1.3.2 Work safety

• Protection devices: The equipment must not be

operated without protection devices.

•The drawbar position must not be above

horizontal position due to the risk of tipping. See section

2.1.2 Total weight reference – support load.

• Driving gear: The warranty and liability become void if

changes are made to the driving gear.

• Oblique position: The road may have a maximum

inclination of 10%.

• The spreader must only be subjected to repair work

when the motor of the towing vehicle has been stopped.

• Following repair work, all safety devices must be conne-

cted to the spreader.

• Unauthorised persons are to be turned away from the

danger zone.

• Persons must not be in the immediate proximity of the

machine (1 m to the side of the machine) when the

machine is operating.

• Notice! - Only spare parts recommended by the manu-

facturer must be used.

2.1.3.3 Before driving

Before starting, the driver should check that:

• the tow plate of the spreader must be vertical

when the vehicle is loaded.

• the spreader’s towbar is correctly positioned and secu-

red to the tow-bar on the vehicle.

• fixing points (guide chains) from the spreader to the vehi-

cle have been connected.

• the stabilizers have been raised.

• the safety devices are functioning.

• electrical connections and power supply have been

connected.

• the lights are functioning.

• the operating device has been fitted.

• the air pressure in the tyres is correct.

Remember to check adjustments.

2.1.3.4 Safety during cleaning, repairs and

maintenance

• When cleaning, repairs, maintenance and

similar work is performed on the spreader, the

motor of the towing vehicle must be stopped.

• Intervals of maintenance are divided into operating

hours and apply to normal operating terms.

• Please observe the specified intervals of maintenance.

•See the maintenance and inspection list.

• Only the spare parts approved and recommended by

the manufacturer must be used.

Please use the original Epoke-spare parts only.

•After repair, safety devices must be correctly fitted

again.

•It is not allowed to drive without safety devices.

2.1.3.5 Suggestions for a user guide

For a safe operation, the employer has to make a

user´s guide.

Employer is required to equip the tool with various devices

and make all necessary arrangements which correspond

to the applicable safety instruction, technical and medical

regulations.

The employer has to instruct the users of the dangers,

which may arise from operation with the tool and

precautions which must be made, and thereafter the

instruction must be repeated at regular intervals, at least

once a year.

The employer can fulfill this requirement by providing a

user´s guide. Please be aware of the legislation concer-

ning the safety area.

You may pass on the following instructions/information of

the operation to your staff e.g.:

• Normal/permitted usage

•Abnormal usage

• Safety in public traffic

• The user must be aware of, that his/her presence in the

danger zone (working area) is forbidden.

• Information of safety devices.

• If a fault/defect arises in the equipment in the equipment

which may present a risk/danger to the insured parties,

the equipment must be stopped.

• Using oil (TKG12).

• First aid instructions

•Operational safety

•Reference to faults and their rectification

•Instructions regarding the warning instructions

•Permissible operating data

•Environmental protection

•Supervision during use

•Servicing

•Maintenance

•Repair work on load-bearing and other technical parts

relating to safety.

epoke®

TK, TMK

GB-0306.1

2.1.4 Guidelines for chains (guide chains)

Use: Chain must not be strained. They must not be used

for lifting, if there is any doubt that the permitted weight is

overstepped. Only chains accompanied by a certificate

should be used with the hoisting device. Chocks must be

avoided, especially in cold weather.

Only the original chains supplied by the manufacturer.

The chains must never be twisted, and no knots must be

tied, see fig. 1. The chains must never be damaged, as

for instance blows with a hammer, twisting with tongs,

mandrels etc. Twisting of chains must be avoided as

much as possible.

Maintenance: Chains must be kept in good condition.

Chains must be checked thoroughly with regular inter-

vals, however they must be thoroughly checked every

12th month. When checking the chain, each link must be

carefully checked and preferably with magnifying glass in

order to see if there should be any breaks etc., see fig. 2.

The maintenance of chains must include regular wash

down in corrosion protecting agent.

Chains should be stored in a cool, dry place when not in

use.

Chains must not be repaired through welding, soldering

etc.

Scrapping -Chains must be scrapped when:

• the links of the chain has been reduced at wearing with

10% of the original thicknes, or a link has been length-

ened with more than 5%, see fig. 3.

• the chain has corrosion cracks.

• a link is stretched, twisted or bent out of shape, has

breaks, cracks or other deformations.

• there are twists or deformations over many links. Such

twists can be difficult to see when checking each link,

but can be checked by hanging up the chain in one

end, so that the chain hangs free. The links must form

exact vertical lines without twists.

2.1.10 Oil (TKG12)

When using liquids, skin contact and inhalation of vapours

must be avoided whenever possible. If this is not possible,

suitable personal protective equipment must be used.

2.1.11 Lubricating grease

Long-term or repeated contact with the skin can entail irri-

tation or serious skin problems. Wash thoroughly with

soap and water. Avoid inhalation of grease fumes. Avoid

wearing clothing wetted with grease.

fig. 1

fig. 2

fig. 3

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Epoke Streuer Handbücher

Epoke

Epoke SKE8 Bedienungsanleitung

Beliebte Streuer Handbücher anderer Marken

PEQUEA

PEQUEA GT-100 Bedienungsanleitung

Herculano

Herculano H2RS9 Bedienungsanleitung

GEA

GEA EL44 Technisches Datenblatt

Boss Snowplow

Boss Snowplow TGS 800 Bedienungsanleitung

Fisher

Fisher EMERSON 168 Series Bedienungsanleitung

Fisher

Fisher POLY-CASTER 78601 Bedienungsanleitung

TurfEx

TurfEx RS7200 Betriebsanleitung

Ferris

Ferris Pathfinder Series Bedienungsanleitung

Fayat Group

Fayat Group DYNAPAC S100 Fehlerbehebungshandbuch

Art's-Way Manufacturing

Art's-Way Manufacturing X700 Installations- und Betriebshandbuch

EASTMAN

EASTMAN CR 500 Bedienungsanleitung

Nogueira

Nogueira RoyalFlow-600 Bedienungsanleitung

Buyers

Buyers TGS05B Bedienungsanleitung

Magnum

Magnum V-BOX PV Series Beilage

Meyer's

Meyer's VB280 Bedienungsanleitung

SnowEx

SnowEx VX-4210 Bedienungsanleitung

Kramer

Kramer VM-400HDCP Bedienungsanleitung

H&S

H&S 5134 Bedienungsanleitung