Epomaker TH68 Bedienungsanleitung
QUICK START GUIDE RKER
EPOMAKER TH68
Esc 1!
Fl
Caps s D F G H J
Ins
K
Home
LEnter
EPOMAKER TH68
0
Pgup
WEIGHT: 980g ± 50g
65% Hot-Swap Wired/WireIess Mechanical Keyboard
This Quick Guide is an introduction to the use and functionality of the EPOMAKER TH68.
For in-depth guide of functionality of the customization software please refer to the manual that you can find in
the official epomaker website at https://epomaker.com/pages/software-downloads
MODEL:
SIZE:
NKRO:
SYSTEM:
CONNECTION:
329.5 x 115.6 x 40 ± 5mm HOTSWAP: YES
Yes
Windows / Mac
KEYCAPS: PBT
LAYOUT: 67 Keys
USB-C, 2.4GHz Bluetooth 3.0, Bluetooth 5.0.
Made in China
Manufacturer: Shenzhen Changyun Technology Co., Ltd. EC
Address: Seventh Floor, Kai Daer Building, No.168 Tongsha Road,
Xili Street, Nanshan Disctrict, Shenzhen,Guangdong, CN
Web: www.epomaker.com
REP
APEX CE SPECIALISTS LIMITED
Address: UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS
PARK, NEW MALLOW ROAD CORK, T23 AT2P, IRELAND
Contact: Wells
Tel: +353212066339
SHORTCUTS BACKLIGHT SETTINGS
FN+2
FN+3
FN + 4
FN+5
FN+6
FN*I
Fl
prtSc
ScrLk
FN+8
FN + —
FN + =
FN+K
FN +
FIO
Fl I
Home
End
INS
FN. DEL
FN PGUP
FN + PGDN
Backlight Brightness +
Backlight Brightness -
Backlight Effect Speed -
Backlight Effect Speed +
Toggle the light mode
Toggle the side light color
Turn on/off the RGB
KNOB FUNCTIONS
FN + SHIFT* ESC
FN+S
FN+D
FN+Q
FN+E
FN+R
CTRL_L +
Play/Pause
Last song
Next song
Bluetooth Device 1
Bluetooth Device 2
Bluetooth Device 3
2.4GHz Wireless
Long Press to Restore Keyboard to Default
Setting
FN + WIN
Lock/Unlock Windows
C)
o
Del
TURN CLOCKWISE
Increase Volume
TURN COUNTER CLOCKWISE
Reduce Volume
PRESS KNOB
Play/Pause
CUSTOM FUNCTIONS
You can also use the software to
customize the knob functions.
CHANGE RGB EFFECTS
Pressing Fn + Del at the same time allows you to switch the RGB effect of
your TH68 Keyboard.
Bluetooth Wired
WIRED OR WIRELESS
USB-C
2.4Ghz
Find the Connectivity Mode switch in the back of the keyboard and slide it to the left, right or
center to change the connection method.
PAIRING BLUETOOTH
FN + QIWIE Long Press for 3 seconds to pair Bluetooth device
FN + QIWIE Short Press to switch to last paired device
Turn the switch to the right to activate the Bluetooth pairing mode. Long press FN+Q/W/E to
start pairing. While pairing, the LED will flash quickly. After successfully pairing, the LED will stay
on for around 10 seconds. If the connection is failed in 30 seconds, the LED will be off and the
keyboard will be in sleep mode.
PAIRING WIRELESS 2.4GHz
FN+R Long Press for 3 seconds to pair Wireless 2.4GHz
Turn the switch to the left to activate the 2.4G pairing mode. Insert the receiver into your
computer, you will see the LED flash quickly. After successfully paring, the LED will stay on for
around 10 seconds. If the connection is failed in 30 seconds, the LED will be off and the keyboard
will be in sleep mode.
PAIRING WIRED MODE
Keep the switch staying in the middle, and connect the keyboard with your device via a USB-C
cable.
BLUETOOTH a WIRELESS 2.4GHZ SPECIFICATIONS
Operating system should be windows 8 or above to support the Bluetooth function. The device
should support Bluetooth 5.0 or a higher version to use Bluetooth 5.0.
KEYBOARD WAKE UP/ SLEEP
If your keyboard is sleeping press any key to wake it up, it will remember the last device connected.
REPLACING KEYCAPS AND SWITCHES
For a full guide on how to remove keycaps and switches scan the QR Code or type in your browser:
https://epomaker.com/blogs/guides/diy-guide-how-to-remove-and-replace-your-mechanical-keyboard-switches
x
Push Straight
Down
Please be gentle. Be sure
the pins are aligned with
the slots.
Before installing switches, be sure the pins are clean and straight.
n
GATERON
Included
Tools
Switch Puller
Remove Switches
Mechanical
Switch
Example of a switch
as seen from top
after you remove the
keycap to prepare for
switch removal.
Logo
Switch Shaft
Keycap Puller The Switch Puller tool aligns Vertically to the Switch to
unclip the plastic securing the switch to the plate.
Install Switches
I. Grab your Switch Removal Tool and align the gripping teeth
vertically (on the Y-Axis) at the center of the switch, as shown in
the example graphic above.
2. Grab the switch with the Switch Puller and apply pressure until
the switch releases itself from the plate.
3. Using firm but gentle force pull the switch away from the
keyboard using a vertical motion.
2.
3.
4.
Check that all the switch metallic pins are perfectly straight and clean.
Align the switch vertically to have the Gateron logo facing north. The
pins should align themselves to the keyboard PBC.
Press the switch down until you hear a click. This means your switch
clips have attached themselves to the keyboard plate.
Inspect the switch to ensure it's properly attached to your keyboard,
and test it.
Note: If the key doesn't work its possible you may have bent one of the switches while installing it. Pull the switch out and repeat the process.
Pins may be damaged beyond repair and need replacement if this process is not done correctly. Never apply excessive force when replacing
keycaps or switches. If you cannot remove or install keycaps or switches please contact customer service as soon as possible to avoid
damage to the keyboard due to operating errors.
TECHNICAL ASSISTANCE
For technical assistance, please email to
a detailed description of your issue.
We normally respond to enquiries within 24 hours. If you
purchased your keyboard from a distributor or not from any
official store of Epomaker, please contact them directly for any
additional help.
COMMUNITY FORUMS
Join our community and learn together with
other keyboard enthusiasts.
https://discord.gg/2q3Z7C2
https://www.reddit.com/user/epomaker/
WARRANTY
EPOMAKER's Warranty covers any factory defects that might
affect the proper functionality of your purchase. It doesn't
cover any damage that may occur from normal wear and tear.
If your product is defective we will send you a replacement
unit. Replacement units might require you to send the
defective unit back to Epomaker.
We provide a 1 year warranty for our products when bought
from our website (EPOMAKER.com). Your item will not be
covered by your 1 year warranty if the inspection shows any
sign of modification or changes unsupported by the original
product, these include: Changing internal components,
Assembling and reassembling the product, Replacing
Batteries, etc.
We will ONLY cover the item if it is bought from our official
stores. You do not have a warranty with us if you bought the
item from another reseller or likewise. Please contact the store
that you bought your product from to resolve issues.
Inhaltsverzeichnis
Andere Epomaker Tastatur Handbücher
Epomaker
Epomaker TK68 Bedienungsanleitung
Epomaker
Epomaker TH80 PRO Bedienungsanleitung
Epomaker
Epomaker EP64 Bedienungsanleitung
Epomaker
Epomaker TH80 Bedienungsanleitung
Epomaker
Epomaker Alice Bedienungsanleitung
Epomaker
Epomaker TH21 Bedienungsanleitung
Epomaker
Epomaker TH68 PRO Bedienungsanleitung
Epomaker
Epomaker EP84 Bedienungsanleitung
Epomaker
Epomaker GS66 Service-Handbuch
Epomaker
Epomaker EP84 PLUS Bedienungsanleitung
Epomaker
Epomaker EK21 VIA Bedienungsanleitung
Epomaker
Epomaker EP68 Bedienungsanleitung
Epomaker
Epomaker Ajazz K870T Service-Handbuch
Epomaker
Epomaker EP60 DIY Kit Bedienungsanleitung
Epomaker
Epomaker TH68 PRO Bedienungsanleitung
Epomaker
Epomaker SKYLINE 75 Bedienungsanleitung
Epomaker
Epomaker 680 GASKET KIT Bedienungsanleitung
Epomaker
Epomaker TH66 PRO Bedienungsanleitung
Epomaker
Epomaker RT100 Bedienungsanleitung
Epomaker
Epomaker Shadow-X Bedienungsanleitung
