EPOX BT-PA02A Bedienungsanleitung

EPoX USB PRINTER ADAPTER

BT-PA02A

~ User’s Guide ~

DISCLAIMER OF WARRANTIES

There are no warranties which extend beyond the

description on the face of the EPoX limited warranty. EPoX

expressly excludes all other warranties, express or implied,

regarding its products; including any implied warranties of

merchantability, fitness for a particular purpose or

non-infringement. This disclaimer of warranties shall apply to

the extend allowed by state laws in the states of United States

in which state laws do not allow or limit the exclusion of the

implied warranties.

Document No : PA02AA0 REV 1.0

PA02AA0 REV 1.0 602A002P2A100

USER’S GUIDE

Thank you for purchasing an EPoX Bluetooth USB Printer

Adapter! Your printer will soon be Bluetooth enabled, allowing you to

print remotely from desktop PCs, notebook computers, PDAs,

Pocket PCs and many other Bluetooth devices without any cables.

A. ITEMS INCLUDED IN THIS PACKAGE

1 EPoX Bluetooth USB Printer Adapter

1 User Guide

1 AC/DC Power Adapter

B.FEATURES & SPECIFICATION

 Bluetooth Profile Supported: Serial Port

 Printer Speed: Up to 115,200bps

 Printer InterfaceUSB 1.1 compliant

 Chipset: CSR BlueCore 02

 Buffer Memory: 32K Bytes SRAM

 Power Consumption: 0.7 Watt, 6 Vdc

 Power AdapterInput AC 100~240 Volts

: Output DC 6V @ 1A

 Frequency Range: 2.4-2.4835 GHz

 Antenna: Build-In

 Receive Sensitivity: From –80dBm to –85dBm

 RangeAround 100 Meters(Line of sight)

 Operation System Supported Windows 98SE/ME/2000/XP

PA02AA0 REV 1.0 602A002P2A100

C. PRINTER ADAPTER HARDWARE INSTALLATION

Plug the EPoX USB Printer adapter into the USB printer port of

your printer as shown below. Now, your printer has become

Bluetooth enabled. Congratulations!!

1.Plug BT-PA02A into the printer port.

2.Plug the power into the BT-PA02A

"Note: Please do not use any other power adaptor with the

EPoX USB Printer Adaptor (BT-PA02A). If you have

problems, contact your dealer for a replacement.

D. ESTABLISHING A CONNECTION

To establish the Bluetooth connection, you have to configure

the serial port setting on the Bluetooth device. If your Bluetooth

device is an EPoX BT-MB02B or BT-DG02 or BT-DG03 or BT-DG02A,

after the Widcomm protocol stack is installed, then follow the steps

below. If your Bluetooth device is other than EPoX, please contact

your manufacturer to obtain more information.

D.1: Checking the COM port used by BT-PA02A EPoX Bluetooth

USB Printer Adapter:

PA02AA0 REV 1.0 602A002P2A100

1 Double click the Bluetooth icon to enter the My Bluetooth

window.

2 By double-clicking on the Entire Bluetooth Neighborhood

icon, you will find all the local Bluetooth enabled devices

nearby.

PA02AA0 REV 1.0 602A002P2A100

3 Find the EPoX BT-PA02A XXXXXX and double-click on it, the

Cable Replacement icon be shown along with all the services

offered by the printer adapter.

4 By double-clicking on the Cable Replacement icon, the “Cable

Replacement” prompt window appears. It will show the COM

port the EPoX Printer adapter will be using. Please make note of

it and remember it.

"Note: The COM port is automatic assigned and cannot be

overridden.

PA02AA0 REV 1.0 602A002P2A100

D.2. Specifying the COM port on your printer:

 If you haven’t installed the printer driver yet, please install it

now.

1. By clicking the window Start button, select Setting and,

then Printers, the printer setup window will display on the

screen.

2. By double-clicking on the Add Printer icon, you will

proceed with the printer driver installation for the Bluetooth

enabled printer.

PA02AA0 REV 1.0 602A002P2A100

3. Follow the installation steps to set up the printer. When

choosing the printer port, please set the COM port as same

as the BT-PA02A (Reference D.1 4).

Windows 2000

Windows 98SE/ME

Windows XP

PA02AA0 REV 1.0 602A002P2A100

 If your printer is already installed with its driver, please change the

com port to the same BT-PA02A, and following the steps below:

1. By clicking the Start button, select Setting, and then click

on Printers the printer setup window will be displayed.

2. Please select the printer connected to the BT-PA02A, and

right-click on its icon, and then select Properties to enter

the properties window.

PA02AA0 REV 1.0 602A002P2A100

3. If your system is running Window 2000/XP, select the Ports

tab. Choose the COM port that is being used by the

BT-PA02A and press OK. You are done!

If your system is running Window 98SE/ME, and select the

Details tab. Choose the COM port that is being used by the

BT-PA02A and press OK. You are done!

PA02AA0 REV 1.0 602A002P2A100

D.3: Important items to check

Whether your printer drivers are installed or not, check the

printer’s Properties (Please reference above).

 If your system is running Window 2000/XP, and click on the

Ports tab and check the following two items:

1. Uncheck Enable bidirectional support.

2. Click on the Configure Port. Button, then the COM X

Properties prompt window will be shown and chose the

115200 port speed under the Bits per second drop down

menu.

Inhaltsverzeichnis

Sprachen:

Andere EPOX Adapter Handbücher

EPOX

EPOX USB Dongle Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

RCA

RCA AH57R Bedienungsanleitung